Bosch WFR 2830 Instruction Manual And Installation Instructions page 25

Load adjust
Hyd. sensor
Unbalanced load detection
system
Load adjust" matches the water and power
consumption to each programme - according to the
amount of washing and type of textiles.
Water and energy consumption is therefore reduced
when washing small amounts of laundry.
The flow sensor measures the water flow rate like an
internal water gauge and meters the exact volume of
water required by the amount of washing.
The stepless water level sensor ensures that the water
level is correct in each programme for washing your
laundry - from our economical coloureds
programmes to the gentle Delicates/Silk" and
Woollens" programmes.
The hyd. sensor checks the degree of turbidity of the
rinsing water. The duration and number of rinse cycles
is dependent on the turbidity of the water.
You can therefore save water and time when washing
lightly soiled washing with the appropriate amount of
detergent.
The automatic unbalanced load detection system
spins the washing several times to ensure even
distribution.
If the washing is very unevenly distributed, it is not
spun for reasons of safety or the end speed is
reduced.
In the woollens programme the washing is spun only
twice to prevent matting.
25