Basic Procedure For The Mixer; Mixer – Editing The Volume And Tonal Balance - Yamaha CVP-709 Owner's Manual

Mixer
– Editing the Volume and Tonal Balance –
The Mixer gives you intuitive control over aspects of the keyboard parts and Song/Style channels, including
volume balance and the timbre of the sounds. It lets you adjust the levels and stereo position (pan) of each
Voice to set the optimum balance and stereo image, and lets you set how the effects are applied.
This chapter covers the basic procedures for the Mixer. For details, refer to the Reference Manual on the
website (page 9).

Basic Procedure for the Mixer

1
Call up the Mixer display via [Menu] → [Mixer].
2
Touch a tab for editing the balance between the desired parts.
Panel
Style1
(for CVP-709)
Style
(for CVP-705)
3
Use this display when you want to adjust the balance between the entire Song part,
entire Style part, Mic part, Aux In part, Main part, Layer part, Left part and the
USB wireless LAN adaptor part if one is connected.
NOTE
A USB wireless LAN adaptor may not be included depending on your area.
Use this display when you want to adjust the balance between the parts of the Style.
• Rhythm1, Rhythm2
These are the basic parts of the Style, containing the drum and percussion rhythm
patterns.
• Bass
The bass part uses various appropriate instrument sounds to match the Style.
• Chord1, Chord2
These comprise the rhythmic chord backing, commonly consisting of piano or guitar
Voices.
• Pad
This part is used for sustained instruments such as strings, organ, choir, etc.
• Phrase1, Phrase2
These parts are used for punchy brass stabs, arpeggiated chords, and other extras that
make the accompaniment more interesting.
2
CVP-709/CVP-705 Owner's Manual 91