Yamaha RX-V1700 Owner's Manual page 39

■ If "WARNING" appears
When this unit detects potential problems during the
"AUTO SETUP" procedure, "WARNING" appears in the
"RESULT:EXIT" display. Check the warning messages to
correct your speaker settings.
Note
Warnings differ from errors in that warnings do not cancel the
"AUTO SETUP" procedure.
1
Make sure the pointer is pointing at
"WARNING" and then press ENTER to
display the detailed information about the
warning.
The number on the right of "WARNING" indicates
the number of warning messages.
RESULT:EXIT
. WARNING (3)
RESULT
.
SP
.
DIST: 4.50/ 6.10m
.
LVL : -9.0/ +6.5dB
[SET CANCEL
[ ]/[ ]:Up/Down
[ENTER]:Enter
2
Press l / h repeatedly to toggle between the
warning displays.
WARNING: W-1
< OUT OF PHASE >
Reverse Channel
FL
CENTER
PL
SL
SBL
p [
[ ]/[ ] : Select
[ENTER] : Enter
y
• For details about each warning message, see the "AUTO
SETUP" section in "TROUBLESHOOTING" on
page 120.
• When the corresponding warning message is not
applicable to a speaker, "– –" is displayed instead.
3
Press ENTER to return to the top
"RESULT:EXIT" display.
PRESET/CH
ENTER
A/B/C/D/E
: 5/4/0.1
--
PR
SR
SBR
RESULT:EXIT
WARNING (3)
RESULT
.
SP : 5/4/0.1
.
DIST: 4.50/ 6.10m
.
LVL : -9.0/ +6.5dB
[
.
SET CANCEL
[ ]/[ ]:Up/Down
[ENTER]:Enter
AUTO SETUP
37
En