Installing And Verifying The Yst-Ms35D Speaker Device Drivers; Installing The Device Drivers - Yamaha YSTMS35D Owner's Manual

Installing and verifying the YST-MS35D speaker device drivers

Please follow these steps to install the Yamaha YST-MS35D speaker device drivers in your Windows 98 system
using the included CD-ROM, and verify that Windows 98 recognizes the installed device drivers and that CD audio,
sound generated while using software, and system sounds from the computer will be output via the USB port.

Installing the device drivers

Notes:
• Do not connect the PC and the subwoofer using the USB cable before installing the YST-MS35D device
drivers. If you accidentally connect them, refer to "Re-installing the Device Driver" on page 6.
• Before starting, check the "System Requirements" section to see if your PC supports YST-MS35D.
• Make sure that no other CD-ROM is loaded in the CD-ROM drive and that you quit all application programs.
• Have your Windows 98 CD-ROM ready when you install the Yamaha YST-MS35D speaker device drivers.
You may need it in some cases.
• The installation procedure may differ from the following instructions depending on the system environment.
Follow the instructions that appear in the dialog box. Please contact your computer's manufacturer or dealer
if you have any questions.
1. Connect the YST-MS35D speakers as shown in the diagram on page 2 and connect the AC adapter to the
AC receptacle. At this time, do not connect the subwoofer to the computer using the USB cable.
2. Turn on your PC and, if it's not running already, start Windows 98.
3. Insert the YAMAHA YST-MS35D CD-ROM into the CD-ROM or DVD-ROM drive.
If the Windows 98 Autorun feature is turned on, the installation start up screen appears automatically.
4. Continue with the installation as prompted.
If the Windows 98 Autorun feature is not turned on, you must start the installation manually, as explained below.
5. Double-click the My Computer icon.
The My Computer window opens.
6. Double-click the "Yamaha" CD-ROM icon.
The installation start up screen appears.
7. Continue with the installation as prompted.
8. After the installation is completed, connect the subwoofer to the computer using the USB cable.
4