Yamaha RX-V559 Owner's Manual page 93

Hide thumbs Also See for RX-V559:
Table of Contents

Advertisement

■ Setting the remote control to the Zone 2
mode
Note
The remote control is originally set to the main mode to control
the main zone. To control Zone 2 with the remote control, you
must first set the remote control to the Zone 2 mode.
1
Press CODE SET using a ballpoint pen or a
similar object.
The TRANSMIT indicator on the remote control
flashes twice.
CODE SET
2
Press the numeric buttons to enter the code
number "9992".
STEREO
MUSIC
ENTERTAIN
MOVIE
1
2
3
DIRECT ST.
STANDARD
SELECT
EXTD SUR.
5
6
7
SPEAKERS
ENHANCER
NIGHT
STRAIGHT
9
0
10
EFFECT
■ Controlling Zone 2 with the remote
control
Notes
• The remote control is originally set to the main mode to control
the main zone, and the TRANSMIT indicator on the remote
control is turned off when the remote control is set to the main
mode.
• When the remote control is set to the Zone 2 mode, POWER,
STANDBY, MUTE, and the input selector buttons are set to
control Zone 2. However, the rest of the remote control buttons
remain in the main mode.
• The remote control automatically exits from the Zone 2 mode in
the following cases:
– when you do not make any operations within 10 seconds after
the remote control is set to the Zone 2 mode.
– when you press a remote control button other than POWER,
STANDBY, MUTE, and the input selector buttons.
TRANSMIT
Flashes
4
TRANSMIT
8
Flashes
ENT.
USING MULTI-ZONE CONFIGURATION
1
Press and hold POWER or STANDBY and
then press
to set the remote control to
the Zone 2 mode.
• Press POWER when the main zone is turned on.
• Press STANDBY when the main zone is turned off.
The TRANSMIT indicator on the remote control
lights up while the remote control is set to the Zone 2
mode.
POWER
While holding
down
or
STANDBY
2
Press POWER to turn on Zone 2.
POWER
3
Press one of the input selector buttons to
select the desired input source of Zone 2.
MD
CD
CD-R
CBL
DVD
DTV
V-AUX
DVR
y
To mute the audio output of Zone 2, press MUTE on the
remote control. Press MUTE again to resume the audio
output of Zone 2.
MUTE
4
Press STANDBY to set Zone 2 to the standby
mode.
STANDBY
TRANSMIT
Lights up
SLEEP
MULTI CH IN
TUNER
91

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents