Sharp LC-37GD6U Operation Manual page 67

Useful adjustment settings
DVI input signal setting
Press
A/V
to select the equipment
connected to INPUT 5 terminal, and then
press ENTER.
Press
<e]/~
to select "Option".
Press MENU and the MENU screen displays.
Press INPUT to select INPUT5.
Press
£/T
to select "Input Select", and then
press ENTER.
Press
A./'V
to select a signal type you want
to set, and then press ENTER.
@
If the selected signal type is incorrect, images
are not displayed or displayed without any
color.
Press
~/~
to select "Option" .
Press A/V to select "Input Select", and then
press ENTER.
Press INPUT again to select the input source.
$
An image from the selected source
automatically displays.
o
You can also select the input source by
pressing A/V. .
{) If the corresponding input is not plugged In,
you cannot change the input. Be sure to
connect the equipment beforehand.
Press INPUT.
$
A list of selectable sources appears.
Display
) - - - - - - - - - P O - W E - R
~\
l
o:::::oo:::::o,D
l ~
A-ANAl.OO-B DIGI17U. INPUT
~r
0 0 0 .
CARD
(JV~ ()~
MUTE
o -
v
0
INPUT button
~
~~3
$
If you set INPUT1 and INPUT2 to Auto, the TV will
automatically select the input signal.
{) Check the operation manual of the external equipment
for the signal type.
@
Setting INPUT 1 and INPUT 2 signal
s~lection ~o
HAuto"
when other equipment is connected will result In the
following connectivity priority.
Selecting input source
Use this menu to select the input source.
Selecting input signal type
For setting the signal type of external equipment
connected to INPUT 1 and Input 2 terminals.
• Press MENU and the
MENU
screen displays.
•
@-66