Sharp LC-37GD6U Operation Manual page 22

Watching TV
When you turn on the TV for the first
time~
it will automatically memorize the broadcasting channels where you
live. Perform the following steps before you press TV POWER on the remote control unit.
1" Insert the batteries into the remote control unit. (See page 13.)
2" Connect the antenna cable to the Display. (See pages 17 to 19.)
3. . Plug in the AC cord to the AC outlet. (See page 10.)
language setting
Select from among 3 languages: English, French and
Spanish.
Channel search
Channel auto search makes the TV look for all channels
viewable in the set area.
•
•
•
Press
~/~
to select "Yes" for ANALOG-A}
then press
A/V
to move down.
Press
~/fJ>
to select "Yes" for ANALOG-S,
then press
A/V
to move down.
Press
~/~
to select "Yes" for DIGITAL (Air/
Cable), and press
A./Wf
to move down.
Select HSearch Start", and then press
ENTER.
Example
Press A./V to select the desired language
listed on the screen, and then press ENTER.
Example
Press
~/~
to select "Air" or llCable" for
ANALOG-A, then press A/'V to move down.
Press
~/fJ>
to select "Air" or "Cable" for
ANALOG-S, then press
.A/T
to move down.
Press
~/~
to select HAir" or "Cable" for
DIGITAL, then press A/V to move down.
Press ENTER to enter the setting.
e
This operation makes the System search for
both ANALOG-AI B and DIGITAL.
@
There are 3 kinds of CATV system, including
Standard , HRC and IRC. Select the one
matches to your TV. Select Auto when you do
not know which one to select for ANALOG
antenna.
Antenna setting
Make sure what kind of connection is made \ivith your TV
when selecting HAir" or HCable" for both ANALOG-A, 8 and
DIGITAL.
I
~
o
When the CableCARD is inserted, only the llCable" option
will be displayed.
~
.,E'~~G~~~
e
Make sure what kind of connection is made with your TV
when selecting HAir" or llCable" for both ANALOG-A, B
and DIGITAL.
o
If no channel is found, make sure what kind of connection
is made with your TV and try EZ setup again (see page
27).
(@-21