Second Call; Accepting A Waiting Call; Refusing A Waiting Call; Answering A Call On Another Line - Siemens optiPoint 410 User Manual

Operating the Telephone with the Display
Step by Step
Answer call?
>
Disconnect and return? >
>
Refuse call?
26

Second Call

If the "Call waiting" function is activated (
and your are currently making a call, you can pick up an-
other call. The caller hears the on-hook signal, you hear
the call waiting signal.

Accepting a Waiting Call

You are conducting a call. A second call is indicated in
the display and you hear a call waiting signal.
:
Confirm query.
>
You can talk with the second party.
The connection with the first party is held.
:
Confirm to end the call and return to the first party. The
first party connection is displayed again.
To activate or deactivate the "Call waiting" func-
tion, see

Refusing a Waiting Call

On multiline telephones, incoming calls can only
be refused via the prime line.
You can refuse a waiting call.
You hear the call waiting signal and the number of the
waiting party is displayed.
:
Select "Refuse call" and confirm.
>
The waiting party receives notification of the refusal and
the call with the first party is redisplayed.
The refused call is stored in the Missed Calls list.

Answering a Call On Another Line

If you are making a call on a multiline telephone, incom-
ing calls on other lines are signalled by a line key.
The administrator can configure one of the following op-
tions for your telephone:
• No ring when active on the telephone
• An advisory tone (a quieter ring tone than usual)
while you are conducting a call
page 70.
page 70)