Table of Contents
Advertisement
Remote controller display
Set temperature/time
On/Off timer indicator
Fan speed indicator
Using the remote controller
Point the remote controller towards the remote controller receiver of the indoor unit (see page 11 to find the location of
remote controller receiver).
When you properly press the button on the remote controller, you will hear ring sound from the indoor unit.
• The signal may not be received well of electronic lighting style fluorescent lamps such as inverter fluorescent lamps
are in the same space.
NOTE
• If other electrical products operate by the remote controller, call your nearest contact center.
Changing the batteries
If low battery indicator(
Installing the batteries
1. Push the lever as arrow
indicates on the rear side of the
remote controller and pull up .
Mirage_AP36M0@_IBIM_E_34573A(1).indd 13
indicator
Auto
Low
Medium
High
) is on the remote control display, change batteries. It needs two 1.5V batteries.(AAA type).
2. Insert two AAA batteries .
Check and match the "+" and "-"
signs accordingly. Make sure you
have inserted the batteries in
correct position.
Operation mode indicator
Low battery indicator
Transmit indicator
Air swing indicator
3. Close the cover by place it back
to its original position .
You should hear click sound
when the cover is locked
properly.
2012-02-21 오후 1:08:30
13
Advertisement
Table of Contents
