Table of Contents
Advertisement
Adjusting the position
Keystone distortion correction
Keystone distortion can be corrected only along either horizontal bound of the picture.
Procedure of adjustment
MAIN MENU
PICTURE
POSITION
LANGUAGE
OPTION
TEST PATTERN
SIGNAL LIST
:MENU SELECT
ENTER:SUB MENU
POSITION
SHIFT
SIZE
BLANKING
KEYSTONE
EDGE BLENDING
:MENU SELECT
ENTER:SUB MENU
KEYSTONE
KEYSTONE
LINEARITY
:ADJUST
• Adjust the "LINEARITY" after adjusting the "KEYSTONE".
Note
• The variable range of the "LINEARITY" changes in response to the adjusted value of the
"KEYSTONE".
• Pressing STD (standard) button of the remote control will restore the factory default ("KEYSTONE":
63, "LINEARITY": 63).
• The adjusted value is reflected in other input signals.
• Keystone distortion can be corrected to ±40° of the angle of tilt for the projector against the screen. (If
fixed-focus lens is used, the angle will be within ±27° for PT-D7500U and within ±22° for PT-D7600U.)
64
VID AUTO
63
63
Press the "MENU" button.
The MAIN MENU screen will be displayed.
Select the "POSITION" with the
buttons.
Press the "ENTER" button.
The POSITION screen will be displayed.
Select "KEYSTONE" with the
buttons.
Press the "ENTER" button.
The KEYSTONE screen will be displayed.
Adjust the "KEYSTONE" horizontally
with the
buttons.
The value changes from 0 to 127.
Adjust the vertical "LINEARITY" with
the
buttons.
The value changes from 0 to 127.
Advertisement
Table of Contents
