Table of Contents
Advertisement
1. For 480p dual link (4:2:2p) SMPTE294M-compliant, 720x483 active line 59.94 Hz
progressive scan 270 Mbps
2. 1) For 480p single link (4:2:0p) SMPTE294M-compliant, 720x483 active line 59.94 Hz
progressive scan 360 Mbps
2.
2) For 480i (4:2:2): SMPTE259M-compliant, 59.94 Hz 525 Line 270 Mbps
3) For 576i (4:2:2): SMPTE259M-compliant, 50 Hz 625 Line 270 Mbps
• Insert the input module that meets the input signal specifications.
• Use the SYSTEM SELECTOR button to select the input module that meets desired one of the above four
types of signal specifications. While toggling through those four types, input signal and other information
are displayed and cleared on the screen automatically.
• Normally, use SYSTEM SELECTOR in "AUTO".
• Automatic detection may malfunction if connection is made in any other way than listed above or if any
unstable signal is connected. If this happens, switch to a system that is compatible with the signal format
using the SYSTEM SELECTOR button.
• Use a 3C2W or superior cable for connection to transmit the image information without error.
(Example: 3C2W, 3CFB, 4CFB, 5C2W, 5CFB, 5CFTX, 7CFB etc.)
Serial digital input module (optional)
ET-MD95SD2 (for 480p/480i/576i)
MAIN IN
MAIN OUT
480p Module
ET-MD95SD2
SD signal
MAIN
(Link-A)
Business-use
digital video deck
Serial digital input module (optional)
ET-MD95SD2 (for 480p/480i/576i)
MAIN IN
MAIN OUT
480p Module
ET-MD95SD2
SD signal
Business-use
digital video deck
SUB IN
SUB OUT
SERIAL
SUB
MAIN
(Link-B)
(Link-A)
SD signal output
(active through)
SUB IN
SUB OUT
SERIAL
Connect nothing to
SUB IN/OUT terminals.
SD signal output
(active through)
SUB
(Link-B)
35
Advertisement
Table of Contents
