Table of Contents
Advertisement
Model No.
Interface ports
RGB2 input/RGB1 output terminal
Video input/output terminal
S-video input terminal
Serial input/output terminal
Remote1 input/output terminal
Remote2 terminal
Length of power supply cord
Cabinet
Outside dimensions
Mass
Working environment condition
Remote control
Power source
Operation range
Mass
Outside dimensions
Option
Hanging attachment (For high ceiling) : ET-PKD75
Hanging attachment (For low ceiling)
Dual attachment
Carrying handle
Projection lens
DVI-D input module
Network module
Video signal input module
RGB signal input module
Serial digital input module (SD)
Serial digital input module (480p)
Serial digital input module (HD)
Lamp unit
Wireless mouse receiver
*1.If the projector is used at high altitude (1 400 to 2 700 m), the value for allowable ambient temperature should be
lowered by 5°C.
PT-D7500U
1 set of high-density, D-sub 15p (female)
[For YP
P
input]
B
R
Y: 1.0 V [p-p] synchronization signal included,
: 0.7 V[p-p] 75 Ω
P
P
B
R
[For RGB input] 0.7 V[p-p] 75 Ω For G-SYNC: 1.0 V[p-p] 75 Ω
HD/SYNC: TTL, high-impedance, positive/negative polarity automatically adjusted
VD: TTL, high-impedance, positive/negative polarity automatically adjusted
• However, HD/SYNC, and VD terminals are not compliant with 3-value
direct SYNC.
(Active through for RGB1 output)
1 set BNC
Y 1.0 V[p-p] C 0.286 V[p-p] 75 Ω; Compliant with S1 signals
1 set Mini DIN 4p
Y 1.0 V[p-p] C 0.286 V[p-p] 75 Ω
D-sub 9-pin (female), RS-232C compliant
Used for personal computer control
1 set each for M3 pin jack
Wired remote control, used for link control
D-sub 9p (female)
Used for external control
Width: 530 mm (20.8"); Height : 200 mm (7.9"); Depth: 569 mm (22.4")
19.8 kg (44 lb) (without lens)
*1.Ambient temperature: 0 to 40°C for setting of lamp output at [LOW] and lamp
Ambient humidity: 20 to 80% (no condensation)
approx. 7 m/23' (in front of beam receiver)
110 g (0.24 lb) (including dry cells)
Width: 50 mm (1.9"), Thickness: 31 mm (1.2"), Depth: 181 mm (7.1")
: ET-PKD75S
: ET-DFD75
: ET-HAD75
: ET-D75LE1, ET-D75LE2, ET-D75LE3, ET-D75LE4, ET-D75LE5,
ET-D75LE1SC, ET-D75LE2SC, ET-D75LE3SC, ET-D75LE4SC
: ET-MD75DV
: ET-MD75NT
: ET-MD95VM2
: ET-MD95RGB
: ET-MD95SD1
: ET-MD95SD2
: ET-MD95SD3
: ET-LAD7500 (single bulb), ET-LAD7500W (double bulbs)
: ET-RMRC1
2.5 m (8.2")
Molded resin
selection at [DUAL, LAMP 1, LAMP 2 or SINGLE]
0 to 35°C for setting of lamp output at [HIGH] and
lamp selection at [DUAL]
3 V DC (two AA dry cells)
PT-D7600U
101
Advertisement
Table of Contents
