Correcting Keystone Distortion; Pausing A Picture; Selecting The Picture Mode; Turning On The Button Lights - Panasonic PT-AE700 Operating Instructions Manual

Panasonic lcd projector operating instructions
Table of Contents

Advertisement

Correcting keystone distortion (KEYSTONE)
When either the projector or the screen is tilted, the keystone distortion will
affect the image. You can correct the image proportions by the following
procedure. (Vertical keystone distortion correction only.)
Press the KEYSTONE button.
K E Y S T O N E
Vertical
keystone
distortion
correction
Operation
Press the H H button.
NOTE:
B Vertical keystone distortion can be corrected to ±30° of the angle of tilt.
However, the greater the correction amount, the more the picture quality will
deteriorate, and the harder it will become to achieve a good level of focus. To
obtain the best picture quality, set up the projector and screen in such a way
that the amount of keystone correction required is as minimal as possible.
B The picture size will also change when correction of keystone distortion
is carried out.
B You can also correct keystone distortion from the "KEYSTONE" in the
"MAIN MENU".
B Keystone distortion of the on-screen display will not be corrected.
B Keystone distortion may remain depending on the lens shift adjustment.
Pausing a picture (FREEZE)
Press the FREEZE button.
B The picture being projected will be paused.
B Press the FREEZE button again to cancel the
still picture.
28-E
NGLISH
0
Press the I I button.
Still picture
Selecting the picture mode (PICTURE MODE)
You can select the appropriate picture mode for the type of projected image.
Press the PICTURE MODE button.
B Pressing the PICTURE MODE button will
change the picture mode.
NORMAL ............When watching various image sources.
DYNAMIC ...........When the projector is used in a bright room.
CINEMA1 ............When watching movies. The projected image will be refined.
This mode was well tuned to the look of Hollywood movie.
CINEMA2 ............When watching movies. The projected image will be clear
and have high contrast.
CINEMA3 ............When watching movies. The projected image will have
deep, rich colours.
VIDEO .................When watching video sources such as music or sports
programs.
NATURAL...........To reproduce the colour of the image faithfully from the
image source.
NOTE:
B The picture mode can be also selected in the "PICTURE" menu.
B When the "PICTURE MODE" menu is selected, the settings will switch
automatically to the last "PROFILE" settings (page 32) that were used for
the selected picture mode.
Turning on the button lights (LIGHT)
Press the LIGHT button.
B The buttons on the remote control unit will be
illuminated.
B Press the LIGHT button again to turn off the
button lights. The button lights will be turned off
automatically when no buttons on the remote
control unit are pressed for 10 seconds.
E
-29
NGLISH

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pt-ae700e

Table of Contents