Connecting To Computer; Preparation For The Remote Control Unit - Panasonic PT-AE700 Operating Instructions Manual

Panasonic lcd projector operating instructions
Table of Contents

Advertisement

Connecting to computer

Computer
To RGB
output
Equipment such as
an electric screen
22-E
NGLISH

Preparation for the remote control unit

# Open the cover.
$ Insert the batteries so that the
polarities are correct, and then close the
cover.
AAA batteries
(two)
NOTE:
B Do not drop the remote control unit.
B Keep the remote control unit away from liquids.
B Remove the batteries if not using the remote control unit for long periods.
B Do not use rechargeable batteries.
Operating range
If the remote control unit is held so that it is facing directly in front of the
remote control signal receptor, the operating range is within approximately
7 m (23´) from the surfaces of the receptor. Furthermore, the remote control
unit can be operated from an angle of ±30° to the left or right and ±15°
above or below the receptor.
NOTE:
B If there are any obstacles in between the remote control unit and the
receptor, the remote control unit may not operate correctly.
B If strong light is allowed to shine onto the remote control signal receptor,
correct projector operation may not be possible. Place the projector as
far away from light sources as possible.
B If facing the remote control unit toward the screen to operate the projector,
the operating range of the remote control unit will be limited by the amount
of light reflection loss caused by the characteristics of the screen used.
E
-23
NGLISH

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pt-ae700e

Table of Contents