Turning On The Power - Panasonic PT-AE700 Operating Instructions Manual

Turning on the power

Before turning on the power
1. Ensure that all peripheral
devices are connected properly.
2. Connect the accessory mains lead.
3. Remove the lens cover.
˛ $
˛ &
˛ (
Power indicator
#
Press the MAIN POWER switch to turn on the
power.
BThe power indicator on the projector will illuminate red.
$
Press the POWER button.
BThe power indicator on the projector will flash green. After a short
period, the indicator will illuminate green, and a picture will be
projected.
%
Turn on the power of all connected devices.
BStart the play function of a device such as a DVD player.
NOTE:
B A rattling sound may be heard when the power is turned on, and a
tinkling sound may be heard when the lamp unit is turned on, but these
are not signs of malfunctions.
24-E
NGLISH
Mains lead
# ˛
' ˛
* ˛
( ˛
) ˛
Lens cover
&
Press the input select button to select the input signal.
Input select
button
Control
panel
Changing
signals
Input select
button
Remote
control
Changing
unit
signals
BA picture will be projected in accordance with the selected input signal.
Follow the procedure below when you set the projector up first, and when
you change the setup place.
' Adjusting the lens shift
BUse the shift lever to adjust the
position of the projected image.
BTurn the shift lever right to secure
the shift lever.
( Adjusting the angle
BThe position of the projected image
(upward and downward) can be fine
adjusted by turning the front
adjustable legs.
BIf the projected image contains
keystone distortion, adjust
"KEYSTONE" (refer to page 28 for
details).
)
Adjusting the size
BTurn the zoom ring to adjust
the size of the projected image.
*
Adjusting the focus
BTurn the focus ring to adjust
the focus of the projected image.
VIDEO S-VIDEO YP P
B R
HDMI PC SCART
YP P PC
VIDEO
B R
SCART HDMI
S-VIDEO
˛ '
˛ (
( ˛
˛ )
Zoom
˛ *
Focus
E
NGLISH
-25