Table of Contents
Advertisement
4
Step
Install
Anti-Tip
Brackets
5
This refrigerator has 4-point leveling. The
front is supported by leveling legs, the rear is
Step
supported by wheels.
• Adjust rear wheels beneath the refrigerator
Level
• Turn the 7/16" hex nut located above the
Refrigerator
• For front leveling legs, use a 1-1/2" open-
• Adjust carefully, the refrigerator should be
WARNING
ANTI-TIP PRECAUTIONS
The refrigerator is heavy at the top and must be
secured to prevent the possibility of tipping
forward.
ATTENTION
PRECAUTIONS CONTRE LES
BASCULEMENTS
Le réfrigérateur est beaucoup plus lourd en
haut et il faut le maintenir en place pour éviter
la possibilité de son basculement vers l'avant.
• Mount brackets provided using #12 or #14
wood screws located 83-1/2" from the
finished floor.
• Screws must protrude at least one inch into
vertical wall studs.
• Attach a 35" long 2x4 block to brackets as shown.
Roll Refrigerator Into Opening
• Gently push refrigerator into opening with
hands against front corners. The cardboard
pad should be beneath the refrigerator.
• Roll refrigerator into the opening until it is
flush or semi-flush with adjacent cabinets.
Important Note: When the refrigerator is installed under a soffit
or if there is not enough height for this method of security, use
Step 6 as an alternate. The refrigerator must be secured to
prevent tipping.
to just barely touch the 2x4 block.
front wheels. Turn to raise or lower the
refrigerator.
end wrench.
level and plumb with cabinetry, and should
align with toekick height.
Installation
36" Stainless Bottom Mount Refrigerators
Block
Side View
83-1/2" From Floor
Hex Nut Adjusts
Rear Wheels
Soffit
83-1/2"
From
Floor
to
Bottom
of Wood
Block
Side View
Mounting Bracket
2 x 4 Cut
To 35" Length
Wood Screws Mounted into
Vertical Wood Studs
Leveling Leg
10
Advertisement
Table of Contents
