Graphical User Interface (Gui) Instructions; Access The User Interface; Complete Prerequisite Tasks/Connect The Device; Access The Web Interface - Ubee ddw3611 User Manual

Wireless cable modem gateway

Hide thumbs Also See for ddw3611:

Table of Contents

Graphical User Interface (GUI) Instructions

This chapter explains how to access and use the user interface for the DDW3611

Wireless Cable Modem Gateway.

2.1

Use the instructions in this section to access the user interface for the DDW3611

Wireless Cable Modem Gateway. The web interface provides the mechanism to make

operational configuration changes to the device.

2.1.1

Complete the following prerequisite tasks before installing the DDW3611 Wireless

Cable Modem Gateway and accessing the web interface.

 Remove all contents from the wireless router packaging.

 In addition to the network cable shipped with the device, you will need another

network cable to use when installing/configuring the device.

 Have a Windows PC available and powered on. The Windows PC must have an

ethernet network adapter/ethernet port. The PC must also have an internet

browser installed (Netscape or Internet Explorer).

 Connect the power adapter that is included with the product package to the

DDW3611 Wireless Cable Modem Gateway and to the power outlet.

 Connect one end of a network cable to your computer's Ethernet port. Connect the

other end to one of the LAN ports on the DDW3611 Wireless Cable Modem

Gateway.

2.1.2

Use the following procedure to access the web interface using Internet Explorer from

a Windows computer.

1. From the computer, launch an internet browser (Internet Explorer or Netscape).

2. In the internet browser, enter the following address and press <Enter/Return>:

http://192.168.0.1

DDW3611 Subscriber User Guide • May, 2010

Table of Contents