Security Menu; Input Password; Password Change; Text Display - Panasonic PT-LW80NTE Operating Instructions Manual

Lcd projector for commercial use
Hide thumbs Also See for PT-LW80NTE:
Table of Contents

Advertisement

SECURITY menu

Remote control
See "Navigating through the MENU" on page 29.
See "Main menu and Sub-menu" on page 30.
Entering the SECURITY menu
Every time when you apply to the SECURITY
menu, you will be asked to perform the password
operation.
PICTURE

INPUT PASSWORD

POSITION

PASSWORD CHANGE

LANGUAGE

TEXT DISPLAY

OPTION
TEXT CHANGE
SECURITY
WIRELESS
PASSWORD
RETURN
ENTER
Before you change the password to
your original
Perform to input the following factory default
password operation.
1. Perform F H G I F H G I.
2. Press the ENTER button.
After you change the password
You can change to your original password in the
PASSWORD CHANGE menu.
1. Perform the original password operation.
2. Press the ENTER button.
NOTE:
• The factory default password is valid until you change
the password in PASSWORD CHANGE menu.
• The entered password operations will appear as
asterisks in the box.
• When the projector is initialised, it will be reset to the
factory default password operation.
Control panel
MENU
RETURN
OFF
OFF
INPUT PASSWORD
You can activate the security system and the password
operation will be asked to perform when projecting mode
started. Unless you perform the correct password
operation, all of the button controls will be disabled
except the POWER button.
OFF
Deactive
ON
Active
NOTE:
• When you activated the security system, make sure to
change the password to your original for safety.
• The security system is deactivated by default and when
initialised.
• When the projector is initialised, it will be reset to the
factory default password operation.
PASSWORD CHANGE
You can change the password operation to your original.
1. Press a series of button operation up to 8 as a
password by using F G I and H buttons.
2. Press the ENTER button.
3. Press the exact same series of button operation
you entered in the NEW password box for
confirmation.
If a series of button operation is incorrect, you will be
asked to perform again.
4. Press the ENTER button.
NOTE:
• The entered password operations will appear as
asterisks in the box.
• Change your password regularly.
• Do not use too simple password to guess.
TEXT DISPLAY
You can set your original text, such as company name or
URL information, to display regularly at the bottom of the
projected image while projecting.
OFF
Deactive
ON
Active
E
NGLISH - 41

Advertisement

Table of Contents
loading

Table of Contents