Setting up
Projection method
You can use the projector with any of the following 4 projection methods. To set the desired method in the projector,
See "INSTALLATION" on page 38.
Setting on a desk/floor and
projecting from front
INSTALLATION: FRONT/DESK
Mounting in the ceiling and
projecting from front
INSTALLATION: FRONT/CEILING
NOTE:
• A translucent screen is required for rear projection.
• When mounting the projector in the ceiling, the optional ceiling mount bracket (ET-PKB80) is required.
Front leg adjusters and throwing angle
You can adjust the projection angle in the vertical direction by pressing the leg adjuster buttons.
See "Positioning the image" on page 24.
NOTE:
• Heated air comes out of the air exhaust port. Do not touch the air exhaust port directly.
• If keystone distortion occurs, see "KEYSTONE" on page 34.
E
NGLISH - 18
Setting on a desk/floor and
projecting from rear
INSTALLATION: REAR/DESK
Mounting in the ceiling and
projecting from rear
INSTALLATION: REAR/CEILING