Table of Contents
Advertisement
About Your Projector
Remote control
POWER button
Switch between stand-by
mode and projection mode.
(page 21/page 22)
See CD-ROM contents for
the PAGE buttons
Display the main menu.
(page 29)
Navigate through the
menus with FGIH, and
activate the menu item with
ENTER button. (page 29)
Capture the projected image
as a frozen picture. (page 26)
Reset some of the settings to
the factory default settings.
(page 26)
See CD-ROM contents
the MULTI-LIVE button.
Control to change the
scale by means of digital
zoom. (page 28)
Battery compartment
1. Press the tab and lift up the cover.
2. Insert the batteries according to the polarity diagram
indicated inside.
NOTE:
• Do not drop the remote control.
• Avoid contact with liquids or moisture.
• Use manganese batteries or alkaline batteries with the remote control.
• Do not attempt to modify or disassemble the remote control. Contact an Authorised Service Centre for repairs.
• Do not keep pressing the remote control buttons as this may shorten battery life.
• See "Remote control operation" on page 25.
E
NGLISH - 16
Control to adjust the
volume of the speaker.
(page 27)
Top view
(page 25)
Attaching a hand
strap
You can attach a favourite strap
on to the remote control.
Detect the input signal and the
setting of POSITION, DOT
CLOCK and CLOCK PHASE
in POSITION menu will be
adjusted automatically for
COMPUTER signals. (page 25)
INPUT SELECT buttons
Switch the required input
signal button to select.
See CD-ROM contents the
WIRELESS button.
Return to the previous menu.
(page 29)
Turn off the projection
temporarily. (page 26)
Display the frozen image
while the display of
subsequent images
continues. (page 27)
See CD-ROM contents the
COMPUTER SEARCH
button.
Assign a useful function for
shortcut. (page 27)
Remote control signal
emitters
Advertisement
Chapters
Table of Contents
