NAVMAN
GPS 4100
8-3 Bluetooth GPS Receiver Specifi cations
Size
Weight
Case
Mounting options
Internal batteries
External power supply (optional)
Low battery indication
95 x 62 x 26 mm (3.7 x 2.4 x 1 in)
223 g (7.9 oz) (No batteries, without magnet base)
UV stable plastic
•
Suction cup
•
Single sided non-slip tape
•
Self-adhesive mounting pad
•
Armband
•
Lanyard
•
3 x AAA alkaline supplied
•
Rechargeable AAA batteries can be used; the
Bluetooth GPS Receiver does not recharge the
internal batteries when it is connected to an
external power supply.
5 V DC, pin in middle is positive
•
The LED is blue when the battery voltage
is above 3.2 V DC and red when it is lower.
Change the batteries when the LED turns red.
Operating temperature
-10 to + 60°C (14 to 140°F)
Standards compliance
EMC compliance
• CE (Europe): EN301489, 300328-2
• E-mark (Europe): Annex VII and Viii 95/54/EC
• FCC (USA): Part 15 Class B, 15.247, 15.35, 15.209
• C-tick (Australia): AS/NZS 3548
• MIC (Korea): R-LARN-03-0450
Safety compliance
• UL60950,EN60950.
• EN50371 SAR requirements
• FCC SAR guidelines
Environmental compliance
• not waterproof
GPS antenna
25 x 25 x 4 mm (1 x 1 x 0.2 in) ceramic patch
GPS receiver
SiRF low power chipset
Bluetooth
Class 3
Bluetooth range
At least 10 m (33 ft) with no obstructions
Bluetooth interface
Bluetooth Ver. 1.1 SPP
(Serial Port Profi le)
Battery life
Up to 30 hours (results may vary depending on
battery type and usage patterns)
27