Table of Contents
Advertisement
DATE SETTING
1.
The digits for the day will start flashing on LCD2 (Default setting 1). Set the desired day
by use of the + key.
Note: The data can only be set in conjunction with the selected month. For example, it is
not possible to set the data 30 if the months of February is selected.
2.
Press and release the SET key to enter the "Weekday Setting" mode.
WEEKDAY SETTING
1.
The weekday symbols will be displayed on LCD2 in the pre-set language and flashing.
Set the desired weekday by use of the + key.
2.
Press and release the SET key to enter the mode "ºC OR ºF Temperature Setting".
° C OR ° F TEMPERATURE SETTING
1.
The characters "° C" or "° F" will start flashing on LCD2 (Default setting ° C). B y use of the
+ key select "° C" for temperature display in degrees Celsius or "° F" for degrees
Fahrenheit.
2.
Press and release the SET key to exit the setting mode and switch back to the normal
display mode.
26
Hide quick links:
Advertisement
Table of Contents
