Related Manuals for La Crosse Technology WS-6003U
Summary of Contents for La Crosse Technology WS-6003U
-
Page 1: Table Of Contents
Instruction Manual TABLE OF CONTENTS Topic Inventory of Contents/ Additional Equipment About WWVB Quick Set-Up Guide Detailed Set-Up Guide Battery Installation Program Mode Function Buttons Time Zone Setting DST (Daylight Saving Time) Setting Language Selection Time Setting Calendar Setting 12/24-Hour Setting Selecting °F or °C Features &... -
Page 2: Inventory Of Contents/ Additional Equipment
3) If there is no WWVB reception, manually set the time and date (instructions in the Program Mode). 4) Program the settings. 5) Mount the WS-6003U in a suitable location, where WWVB signals can be received. DETAILED SET-UP GUIDE BATTERY INSTALLATION Note: To avoid start-up problems make sure that the batteries do not spring free. -
Page 3: Program Mode
WWVB Tower Month/Dat up, and will require you to skip step 1 of programming sections III through VIII. Wait approximately 15 seconds for the Atomic Clock to automatically return to normal operation. FUNCTION BUTTONS There are 2 function buttons located on the backside of the Atomic Clock. The function buttons are labeled: SET and +. II) TIME ZONE SETTING 1) Hold down the “SET”... -
Page 4: Language Selection
IV) LANGUAGE SELECTION FOR THE WEEKDAY 1) Hold down the “SET” button for 2 seconds (the selected time zone will flash), press the “SET” button 2 more times, until the default language “US” flashes in the time LCD. 2) Press and release the “+” button to toggle through and to select the desired language. There are 3 languages to select from: 3) Press and release the “SET”... -
Page 5: Features & Operations
FEATURES & OPERATIONS CHANGING DISPLAY MODE (DAY, SECONDS, AND TEMPERATURE) There are three possible display modes to view the day, seconds, and temperature. The month & date/ weekday/ indoor temperature is the default. To change the display: 1) Press and release the “+” button. The display should now show the month & date/ weekday/ seconds. 2) Press and release the “+”... -
Page 6: Maintenance & Care
MAINTENANCE & CARE • Extreme temperatures, vibrations, and shock should be avoided to prevent damage to the units. • Clean displays and units with a soft, damp cloth. Do not use solvents or scouring agents—they may mark and damage the displays and casings. -
Page 7: Warranty Information
WARRANTY INFORMATION La Crosse Technology provides a 1-year warranty on this product. Contact La Crosse Technology immediately upon discovery of any defects covered by this warranty. Before sending the unit in for repairs, contact La Crosse Technology. The unit will be repaired or replaced with the same or similar model. This warranty does not cover any defects resulting from improper use, unauthorized repairs, faulty batteries, or the units’...