Accessing Dab Menu; Init Scan - Yamaha YSP-40D Owner's Manual

Accessing DAB MENU

You can use the DAB MENU to adjust the DAB tuner
parameters and ensemble/service registry list. There are
five operations in DAB MENU: INIT SCAN, TUNE AID,
DRC MODE, PRUNE LIST, and PRESET DELETE.
y
Press RETURN to return to the previous menu level.
1
Switch to DAB reception by following steps 1
to 2 as described in "DAB tuning" on
page 49.
2
Press MENU.
"INIT SCAN" appears in the front panel display.
MENU
3
Press / to select a DAB operation.
ENTER
4
Press ENTER to access the selected DAB
operation.
ENTER
DAB MENU
.

INIT SCAN

TUN AID
DRC MODE
PRUNE LIST
PRESET DELETE
[ ]/[ ]:Up/Down
[ENTER]:Enter
INIT SCAN
DAB (Digital Audio Broadcasting)
INIT SCAN
INIT SCAN locates all of the DAB ensembles and
services in your area. When this operation is selected, this
unit scans the entire band and creates a registry list of
every receivable DAB ensemble and service.
Important
You must perform this scan during the initial setup of this unit
before tuning into any DAB services.
Selective initial scan
1
Access DAB MENU by following steps 1
through 4 as described in "Accessing DAB
MENU" on this page.
"INIT SCAN" appears in the front panel display.
INIT SCAN
2
Press ENTER to select an operation.
The "SCAN?[ENTER]" verification message appears
in the front panel display if an initial scan mode is
selected. (The unit immediately returns to the DAB
MENU if SCAN:NO is selected.)
ENTER
SCAN?[ENTER]
53
En