Using SET MENU
The flow chart of SET MENU
The following diagram illustrates the overall flow of the setup procedure.
Run LANGUAGE SETUP.
See "Changing OSD language" on page 33.
Run AUTO SETUP (IntelliBeam).
See "AUTO SETUP (IntelliBeam)" on page 34.
Play back audio signals or adjust the settings for the beam mode and the CINEMA DSP.
See "Playback" on page 44, "Enjoying surround sound" on page 60, and "Using sound field programs" on
page 69.
Run MANUAL SETUP.
See "MANUAL SETUP" on page 80.
y
• If you cannot clearly hear a sound beam from a specific channel, adjust settings for
SETTING PARAMETERS (see page 82) or for BEAM ADJUSTMENT (see page 83) in
BEAM MENU.
• If there are acoustically absorbent objects such as curtains in the path of the sound beams,
adjust settings for TREBLE GAIN in BEAM MENU (see page 85).
32
En
Look for a remedy.
See "Error messages for AUTO SETUP" on page 40 for a complete list of error
messages and possible remedies.
If you want to make additional settings
and adjustments
If an error occurs