Honda 2007 Civic Hatchback Owner's Manual page 398

SOCKET
3. Remove the socket from the
headlight assembly by turning it
one-quarter turn anticlockwise.
4. Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.
5. Insert the new bulb into the
headlight assembly. Make sure it
is on all the way.
6. Reinstall the cover over the back
BULB of the headlight assembly and turn
it clockwise to lock in place. Make
sure it is right side up; it is marked
''TOP.''
Turn on the lights to make sure
7.
the new bulb is working.
8.
On the left side
Put the battery back to its original
position, reinstall the nut on the
stay and tighten it securely.
Replacing a Front Turn Signal
Light Bulb
HOLDING CLIPS
1. To change the left side bulb, start
the engine, turn the steering
wheel all the way to the right, and
turn off the engine. To change the
right side bulb, turn the steering
wheel to the left.
2. Use a flat-tipped screwdriver to
remove the two holding clips from
the inner fender.
Maintenance
Lights
CONTINUED
395