Multi-Information Display
You can select ''ON'' or ''OFF''. Each
time you press the INFO button, the
selected mode switches between on
and off. Enter your selection by
pressing the SEL/RESET button.
122
Instruments and Controls
When your selection is successfully
completed, the display shows
''SETUP ON'' for a few seconds,
then goes back to the ''CHG
SETTING'' display. Press the SEL/
RESET button, then press the INFO
button repeatedly to select another
customizing mode.
If you fail to enter your selection,
you will see ''INCOMPLETE'' on the
display for a few seconds. The
display returns to the setting mode.
Repeat the setup.
To exit the customizing mode, select
the exit mode by pressing the INFO
button repeatedly, then press the
SEL/RESET button. The display will
return to the normal display.