You can select ''ON'' or ''OFF''. Each
time you press the INFO button, the
selected mode switches between on
and off. Enter your selection by
pressing the SEL/RESET button.
When your selection is successfully
completed, the display shows
''SETUP ON'' for a few seconds,
then goes back to the ''CHG
SETTING'' display. Press the SEL/
RESET button, then press the INFO
button repeatedly to select another
customizing mode.
If you fail to enter your selection,
you will see ''INCOMPLETE'' on the
display for a few seconds. The
display returns to the setting mode.
Multi-Information Display
Repeat the setup.
To exit the customizing mode, select
the exit mode by pressing the INFO
button repeatedly, then press the
SEL/RESET button (see page
The display goes back to the
''WARNING MESSAGE'' display.
To return to the normal display,
select the
display, then press
the SEL/RESET button.
Instruments and Controls
118
).
CONTINUED
119