4-3. Do-it-yourself maintenance
Fuse
12
P/W
13
DOOR R/L
14
DOOR
15
CIG
16
ACC
17
D/L
18
OBD
19
STOP
20
AM1
21
FOG FR
■
After a fuse is replaced
●
If the lights do not turn on even after the fuse has been replaced, a bulb
may need replacement. (→P. 286)
●
If the replaced fuse blows again, have the vehicle inspected by your
Toyota dealer.
■
If there is an overload in a circuit
The fuses are designed to blow, protecting the wiring harness from damage.
■
When replacing light bulbs
Toyota recommends that you use genuine Toyota products designed for this
vehicle.
Because certain bulbs are connected to circuits designed to prevent over-
load, non-genuine parts or parts non designed for this vehicle may be unus-
able.
284
Ampere
30 A
Power windows
20 A
Power windows
20 A
Power windows
15 A
Power outlets
Main body ECU, outside rear view
5 A
mirrors, audio system, shift lock
control system
Power door lock system, main
25 A
body ECU
7.5 A
On-board diagnosis system
Multiport fuel injection system/
sequential multiport fuel injection
7.5 A
system, vehicle stability control
system, stop lights, high mounted
stoplight
7.5 A
Starting system, engine switch
15 A
Front fog lights
Circuit