Replacing A Turn Signal Light Bulb - Yamaha 2011 Star XV250A Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
1. Tail/brake light bulb
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screws. NOTICE: Do not over-
tighten the screws, otherwise
the lens may break.
7
Replacing a turn signal light
bulb
1. Remove the turn signal lens by re-
moving the screws.
1. Screw
2. Remove the burnt-out bulb by
pushing it in and turning it counter-
[ECA10681]
clockwise.
EAU24212
1. Turn signal light bulb
3. Insert a new bulb into the socket,
4. Install the lens by installing the
7-34
push it in, and then turn it clock-
wise until it stops.
screws. NOTICE: Do not over-
tighten the screws, otherwise
the lens may break.
[ECA10681]