2-2. Instrument cluster
■
If the vehicle is moved while settings are being changed on the multi-
information display
■
System check display
Vehicles with smart key system
After switching the "ENGINE START STOP" switch to IGNITION ON
mode, "VENZA" is displayed while system operation is checked. When
the system check is complete, the normal screen will return.
Vehicles without smart key system
After switching the engine switch to the "ON" position, "VENZA" is dis-
played while system operation is checked. When the system check is
complete, the normal screen will return.
202
VENZA_OM_OM73019U_(U)
If the vehicle speed exceeds approxi-
mately 3 mph (5 km/h) while the settings
are being changed, "Please Stop Vehicle
to Change Settings" will be displayed on
the multi-information display, and setting
mode will exit after several seconds. If the
"SETUP" button is pressed at a speed in
excess of 3 mph (5 km/h), only some of
the settings can be changed. To change
the other settings, press the "SETUP"
button after bringing the vehicle to a com-
plete stop.