Toyota 2014 Venza Owner's Manual page 195

■
Trip Timer
Displays the elapsed time since the timer was reset.
The timer only functions when the engine is running. The timer can be
started and paused by pressing the "SELECT RESET" button, and reset
by pressing and holding the "SELECT RESET" button when the trip timer
is displayed.
The display layout may be customized to show 1 line of trip informa-
tion in the normal font size, 2 lines in the normal font size, or 1 line in
a larger font size. (P. 198)
When 2 lines of trip information are displayed, it is possible for both of
them to be reset.
STEP 1
Press the "SELECT RESET" button.
The first display item that may be reset will be highlighted yellow.
STEP 2
Press the "SELECT RESET" button to select or reset each
display item as described above.
STEP 3
Press the "SETUP" button to change which display items to
reset by highlighting it in yellow.
This function only applies if both lines can be adjusted.
STEP 4
Press the "INFO" button to exit the adjusting mode.
Press the "INFO" button a second time to switch the display items.
VENZA_OM_OM73019U_(U)
2-2. Instrument cluster
195
2