Page 1 Search by illustration Pictorial index For safety Make sure to read through them and security Instrument How to read the gauges and meters, the variety of warning lights and indicators, etc. cluster Operation of Opening and closing the doors and windows, adjustment before driving, etc.
Page 2: Table Of Contents
TABLE OF CONTENTS For your information....... 8 Instrument cluster Reading this manual ....12 How to search......13 Pictorial index ......14 Instrument cluster Warning lights and indicators ......82 For safety and security Gauges and meters ..... 87 Multi-information display 1-1.
Page 3 3-4. Adjusting the steering 4-3. Operating the lights wheel and mirrors and wipers Steering wheel ....176 Headlight switch ....237 Inside rear view mirror..178 Automatic High Beam..242 Outside rear view Fog light switch....247 mirrors......180 Windshield wipers and washer......
Page 4 TABLE OF CONTENTS 5-5. Playing an audio CD and Audio system MP3/WMA/AAC discs CD player operation... 337 5-6. Using an external device 5-1. Basic Operations Listening to an iPod ... 343 Audio system types ... 316 Listening to a Audio system..... 317 USB memory device..
Page 5 ® 5-8. Bluetooth Audio ® Interior features Listening to Bluetooth Audio....... 364 ® 5-9. Bluetooth phone 6-1. Using the air conditioning ® Using a Bluetooth system and defogger Phone......366 Front automatic air Making a call ..... 368 conditioning system..404 Receiving a call ....
Page 6 TABLE OF CONTENTS 6-4. Using the other interior 7-3. Do-it-yourself maintenance Do-it-yourself service features Other interior features ..435 precautions...... 473 • Sun visors ..... 435 Hood ........475 • Vanity mirrors....435 Positioning a floor jack..477 • Clock ......436 Engine compartment ..
Page 7 If you have a flat tire (vehicles with a compact For owners spare tire)......564 If the engine will not Reporting safety defects start ......... 578 for U.S. owners ......630 If the shift lever cannot Seat belt instructions for be shifted from P.....
Page 8: For Your Information
Accessories, spare parts and modification of your Toyota A wide variety of non-genuine spare parts and accessories for Toyota vehi- cles are currently available in the market. You should know that Toyota does not warrant these products and is not responsible for their performance, repair, or replacement, or for any damage they may cause to, or adverse effect they may have on, your Toyota vehicle.
Page 9 ● Usage of data collected through Safety Connect (U.S. mainland only) If your Toyota has Safety Connect and if you have subscribed to those ser- vices, please refer to the Safety Connect Telematics Subscription Service Agreement for information on data collected and its usage.
Page 10 EDR. ● Disclosure of the EDR data Toyota will not disclose the data recorded in an EDR to a third party except when: • An agreement from the vehicle’s owner (or the lessee for a leased vehi- cle) is obtained •...
Page 11 Be sure to have the systems of the SRS airbag and seat belt pretensioner removed and disposed of by a qualified service shop or by your Toyota dealer before you scrap your vehicle.
Page 12: Reading This Manual
Reading this manual WARNING: Explains something that, if not obeyed, could cause death or serious injury to people. NOTICE: Explains something that, if not obeyed, could cause damage to or a malfunction in the vehicle or its equipment. Indicates operating or working procedures. Follow the steps 1 2 3 in numerical order.
Page 13: How To Search
How to search ■ Searching by name • Alphabetical index ..P. 649 ■ Searching installation position • Pictorial index....P. 14 ■ Searching by symptom or sound • What to do if... (Troubleshooting) ..P. 644 ■ Searching by title • Table of contents .....P. 2 SIENNA_OM_01999-08001_(U)
Page 14: Pictorial Index
Pictorial index Pictorial index ■ Exterior The shape of the headlights may differ depending on the grade, etc. (P. 509) Front doors........P. 110 Locking/unlocking .
Page 15 Pictorial index Windshield wipers ....... . . P. 248 Precautions against winter season ..... P. 311 To prevent freezing (windshield wiper de-icer) .
Page 16: Instrument Panel
Pictorial index ■ Instrument panel Engine switch....... . . P. 223, 226 Starting the engine/changing the modes .
Page 17 Pictorial index Multi-information display ..... . . P. 90, P. 93 Display ......... P. 90, 93 When the warning messages are displayed .
Page 18 Pictorial index ■ Switches Power window switches ......P. 183 Window lock switch....... . P. 183 Driving position memory switches .
Page 19 Pictorial index 1, 2 Audio remote control switches ....P. 320 Talk switch ........P. 400 Meter control switches .
Page 20 Pictorial index ■ Interior 8-passenger models  7-passenger models  SIENNA_OM_01999-08001_(U)
Page 21 Pictorial index SRS airbags ........P. 36 Floor mats.
Page 22 Pictorial index Moon roof switches ......P. 188, 189 Power sliding door switches ..... . . P. 123 Personal/interior lights .
Page 23: For Safety And Security
For safety and security 1-1. For safe use Before driving...... 24 For safety drive ....26 Seat belts ......28 SRS airbags......36 Front passenger occupant classification system ..50 Safety information for children ......55 Child restraint systems..56 Installing child restraints..
Page 24: 1-1. For Safe Use
1-1. For safe use Before driving Floor mat Use only floor mats designed specifically for vehicles of the same model and model year as your vehicle. Fix them securely in place onto the carpet. Insert the retaining hooks (clips) into the floor mat eyelets. Turn the upper knob of each retaining hook (clip) to secure the floor mats in place.
Page 25 When installing the driver’s floor mat Do not use floor mats designed for other models or different model year ● vehicles, even if they are Toyota Genuine floor mats. Only use floor mats designed for the driver’s seat. ● Always install the floor mat securely using the retaining hooks (clips) pro- ●...
Page 26: For Safety Drive
1-1. For safe use For safety drive For safe driving, adjust the seat and mirror to an appropriate position before driving. Correct driving posture Adjust the angle of the seat- back so that you are sitting straight up and so that you do not have to lean forward to steer.
Page 27 1-1. For safe use WARNING Observe the following precautions. Failure to do so may result in death or serious injury. Do not adjust the position of the driver’s seat while driving. ● Doing so could cause the driver to lose control of the vehicle. Do not place a cushion between the driver or passenger and the seatback.
Page 28: Seat Belts
1-1. For safe use Seat belts Make sure that all occupants are wearing their seat belts before driving the vehicle. Correct use of the seat belts ● Extend the shoulder belt so that it comes fully over the shoulder, but does not come into contact with the neck or slide off the shoulder.
Page 29 1-1. For safe use Fastening the seat belt (for the third center seat) Take the plate out of the holder, and then pull down the seat belt. Push plate “A” into buckle “A” until a click sound is heard. Plate “A” Buckle “A”...
Page 30 1-1. For safe use Releasing and stowing the seat belt (for the third center seat) To release plate “B”, press the release button on buckle “B”. Plate “B” Release button Buckle “B” To release plate “A”, insert the key (P. 104) or plate “B” into Plate “A”...
Page 31 1-1. For safe use Adjusting the seat belt shoulder anchor height (front and second outside Tip-up seats) Push the seat belt shoulder anchor down while pressing the release button. Push the seat belt shoulder anchor up. Move the height adjuster up and Release button down as needed until you hear a click.
Page 32 ■ Seat belt extender If your seat belts cannot be fastened securely because they are not long enough, a personalized seat belt extender is available from your Toyota dealer free of charge. SIENNA_OM_01999-08001_(U)
Page 33 Each seat belt should be used by one person only. Do not use a seat belt ● for more than one person at once, including children. Toyota recommends that children be seated in the rear seat and always ● use a seat belt and/or an appropriate child restraint system.
Page 34 Ensure that the belt and plate are locked and the belt is not twisted. ● If the seat belt does not function correctly, immediately contact your Toyota dealer. Replace the seat assembly, including the belts, if your vehicle has been ●...
Page 35 1-1. For safe use WARNING ■ Using a seat belt extender Do not wear the seat belt extender if you can fasten the seat belt without ● the extender. Do not use the seat belt extender when installing a child restraint system ●...
Page 36: Srs Airbags
1-1. For safe use SRS airbags The SRS airbags inflate when the vehicle is subjected to certain types of severe impacts that may cause significant injury to the occupants. They work together with the seat belts to help reduce the risk of death or serious injury. ◆...
Page 37 1-1. For safe use ◆ SRS side and curtain shield airbags SRS side airbags Can help protect the torsos of the front seat occupants SRS curtain shield airbags ● Can help protect primarily the heads of occupants in the outer seats ●...
Page 38 1-1. For safe use SRS airbag system components Front passenger airbag Driver airbag Curtain shield airbags Side impact sensors (front door) Side airbags Driver’s seat belt buckle Seat belt pretensioners and switch force limiters Driver’s seat position sensor Front passenger occupant clas- sification system (ECU and Driver’s knee airbag sensors)
Page 39 1-1. For safe use Your vehicle is equipped with ADVANCED AIRBAGS designed based on the US motor vehicle safety standards (FMVSS208). The airbag sensor assembly (ECU) controls airbag deployment based on infor- mation obtained from the sensors etc. shown in the system compo- nents diagram above.
Page 40 An infant or child who is too small to use a seat belt should be properly secured using a child restraint sys- tem. Toyota strongly recommends that all infants and children be placed in the rear seats of the vehicle and properly restrained. The rear seats are safer for infants and children than the front passenger seat.
Page 41 1-1. For safe use WARNING ■ SRS airbag precautions Do not sit on the edge of the seat or ● lean against the dashboard. Do not allow a child to stand in front of ● the SRS front passenger airbag unit or sit on the knees of a front passenger.
Page 42 1-1. For safe use WARNING ■ SRS airbag precautions Do not attach anything to or lean any- ● thing against areas such as the dash- board, steering wheel pad and lower portion of the instrument panel. These items can become projectiles when the SRS driver, front passenger and driver’s knee airbags deploy.
Page 43 If the areas where the SRS airbags are stored, such as the steering wheel ● pad and front and rear pillar garnishes, are damaged or cracked, have them replaced by your Toyota dealer. Do not place anything, such as a cushion, on the front passenger’s seat. ●...
Page 44 Modification and disposal of SRS airbag system components Do not dispose of your vehicle or perform any of the following modifications without consulting your Toyota dealer. The SRS airbags may malfunction or deploy (inflate) accidentally, causing death or serious injury.
Page 45 1-1. For safe use ■ If the SRS airbags deploy (inflate) Bruising and slight abrasions may result from contact with a deploying ● (inflating) SRS airbag. A loud noise and white powder will be emitted. ● Parts of the airbag module (steering wheel hub, airbag cover and inflator) as ●...
Page 46 1-1. For safe use ■ SRS airbag deployment conditions (SRS side and curtain shield airbags) The SRS side and curtain shield airbags will deploy in the event of an ● impact that exceeds the set threshold level (the level of force corresponding to the impact force produced by an approximately 3300 lb.
Page 47 1-1. For safe use ■ Types of collisions that may not deploy the SRS airbag (SRS front air- bags) The SRS front airbags do not generally inflate if the vehicle is involved in a side or rear collision, if it rolls over, or if it is involved in a low-speed frontal collision.
Page 48 ■ When to contact your Toyota dealer In the following cases, the vehicle will require inspection and/or repair. Con- tact your Toyota dealer as soon as possible. Any of the SRS airbags have been inflated. ● The front of the vehicle is damaged or ●...
Page 49 1-1. For safe use The front passenger’s seat cushion sur- ● face is scratched, cracked, or otherwise damaged. The surface of the seats with the side ● airbag is scratched, cracked or other- wise damaged. The portion of the front pillars, rear pil- ●...
Page 50: Front Passenger Occupant Classification System
1-1. For safe use Front passenger occupant classification system Your vehicle is equipped with a front passenger occupant classi- fication system. This system detects the conditions of the front passenger seat and activates or deactivates the devices for the front passenger. SRS warning light Seat belt reminder light “AIR BAG OFF”...
Page 51 1-1. For safe use Condition and operation in the front passenger occupant classi- fication system ■ Adult “AIR BAG ON” and “AIR BAG OFF” “AIR BAG ON” indicator lights Indicator/ SRS warning light warning light Seat belt reminder light flashing Front passenger airbag Side airbag on the front passenger seat Activated...
Page 52 1-1. For safe use ■ Unoccupied “AIR BAG ON” and “AIR BAG OFF” Not illuminated indicator lights Indicator/ warning light SRS warning light Seat belt reminder light Front passenger airbag Deactivated Side airbag on the front passenger seat Activated Curtain shield airbag in the front passenger side Devices Front passenger’s seat cushion airbag...
Page 53 1-1. For safe use : The system judges a person of adult size as an adult. When a smaller adult sits in the front passenger seat, the system may recognize him/her as a child depending on his/her physique and posture. : In the event the front passenger is wearing a seat belt.
Page 54 SRS warning light may come on to indicate a malfunction of the front passenger occupant classification system. In this case, contact your Toyota dealer immediately. Child restraint systems installed on the rear seat should not contact the ●...
Page 55: Safety Information For Children
1-1. For safe use Safety information for children Observe the following precautions when children are in the vehi- cle. Use a child restraint system appropriate for the child, until the child becomes large enough to properly wear the vehicle’s seat belt.
Page 56: Child Restraint Systems
1-1. For safe use Child restraint systems A child restraint system for a small child or baby must itself be properly restrained on the seat with the LATCH anchors or the lap portion of the lap/shoulder belt. The laws of all 50 states of U.S.A. and Canada now require the use of child restraint systems.
Page 57 1-1. For safe use Types of child restraints Child restraint systems are classified into the following 3 types according to the age and size of the child: Rear facing  Infant seat/con- Forward facing  Convertible   vertible seat seat Booster seat ...
Page 58 In an accident, the child can be crushed against the windshield, or between you and the vehicle’s interior. Toyota strongly urges the use of a proper child restraint system that con- ●...
Page 59 1-1. For safe use WARNING ■ Child restraint precautions Do not allow the child to lean his/her head or any part of his/her body ● against the side door or the area of the seat, front and side pillars or roof side rail from which the SRS side airbags or curtain shield airbags deploy even if the child is seated in the child restraint system.
Page 60: Installing Child Restraints
1-1. For safe use Installing child restraints Follow the child restraint system manufacturer’s instructions. Firmly secure child restraints to the rear seats using the LATCH anchors or a seat belt. Attach the top tether strap when installing a child restraint. The lap/shoulder belt can be used if your child restraint system is not compatible with the LATCH (Lower Anchors and Tethers for Children) system.
Page 61 1-1. For safe use Third seats  LATCH anchors are provided for the right outboard seat and center seat. (Buttons displaying the loca- tion of the anchors are attached to the seats.) Seat belts equipped with a child restraint locking mechanism (ALR/ELR belts except driver’s seat belt) (P.
Page 62 1-1. For safe use Second seats (7-passenger models)  Anchor brackets are provided for both second seats. Third seats  An anchor brackets are provided for the right outboard seat and cen- ter seat. Installation with LATCH system (second seat) Fold the seatback while pulling the lever and move to the rear- most recline position.
Page 63 1-1. For safe use Type A  Latch the hooks of the lower straps onto LATCH anchors. If the child restraint has a top tether strap, the top tether strap should be latched onto the top tether strap anchor. For owners in Canada: The symbol on a child restraint system indicates the presence of a lower connector system.
Page 64 1-1. For safe use Installation with LATCH system (third seat) Manual seat  Fold the seatback while pulling the strap. Return the seatback and secure it at the 1st lock position (most upright posi- tion). Adjust the seatback to the 11th lock position.
Page 65 1-1. For safe use Type A  Latch the hooks of the lower straps onto LATCH anchors. If the child restraint has a top tether strap, the top tether strap should be latched onto the top tether strap anchor. For owners in Canada: The symbol on a child restraint system indicates the presence of a lower connector system.
Page 66 1-1. For safe use Installing child restraints using a seat belt (child restraint lock function belt) Rear facing Infant seat/convertible seat ■ Place the child restraint sys- tem on the rear seat facing the rear of the vehicle. Run the seat belt through the child restraint system and insert the plate into the buckle.
Page 67 1-1. For safe use Forward facing Convertible seat ■ Place the child restraint sys- tem on the seat facing the front of the vehicle. Run the seat belt through the child restraint system and insert the plate into the buckle. Make sure that the belt is not twisted.
Page 68 1-1. For safe use ■ Booster seat Place the child restraint sys- tem on the seat facing the front of the vehicle. Sit the child in the child restraint system. Fit the seat belt to the child restraint sys- tem according to the manu- facturer’s instructions insert the plate into the...
Page 69 1-1. For safe use Child restraint systems with a top tether strap (second seat) Secure the child restraint sys- tem using the seat belt or LATCH anchors, and adjust the head restraint to the uppermost position. : Ottoman seat only Latch the hook onto the anchor bracket and tighten the top tether strap.
Page 70 1-1. For safe use Child restraint systems with a top tether strap (third seat) ■ Center seat Secure the child restraint system using the seat belt or LATCH anchors. Adjust the head restraint to the upper- most position. Latch the hook onto the anchor bracket and tighten the top tether strap.
Page 71 1-1. For safe use ■ Laws and regulations pertaining to anchorages The LATCH system conforms to FMVSS225 or CMVSS210.2. Child restraint systems conforming to FMVSS213 or CMVSS213 specifica- tions can be used. This vehicle is designed to conform to the SAE J1819. WARNING ■...
Page 72 1-1. For safe use WARNING ■ When installing a child restraint system When installing a child restraint system on the third center seat, adjust ● both seatbacks at the same angle. Otherwise, the child restraint system cannot be securely restrained and this may cause death or serious injuries in the event of sudden braking, sudden swerving or an accident.
Page 73 1-1. For safe use WARNING ■ When installing a child restraint system to the AUTO ACCESS SEAT (if equipped) Do not operate the AUTO ACCESS ● SEAT while a child restraint system is fixed to the seat by the child restraint lock function belt.
Page 74: Exhaust Gas Precautions
Keep the back door closed. ● If you smell exhaust gases in the vehicle even when the back door is ● closed, open the windows and have the vehicle inspected at your Toyota dealer as soon as possible. ■ When parking If the vehicle is in a poorly ventilated area or a closed area, such as a ●...
Page 75: Theft Deterrent System
1-2. Theft deterrent system Engine immobilizer system The vehicle’s keys have built-in transponder chips that prevent the engine from starting if a key has not been previously regis- tered in the vehicle’s on-board computer. Never leave the keys inside the vehicle when you leave the vehi- cle.
Page 76 1-2. Theft deterrent system ■ System maintenance The vehicle has a maintenance-free type engine immobilizer system. ■ Conditions that may cause the system to malfunction If the grip portion of the key is in contact with a metallic object ● If the key is in close proximity to or touching a key to the security system ●...
Page 77: Alarm
1-2. Theft deterrent system  Alarm The alarm The alarm uses light and sound to give an alert when an intrusion is detected. The alarm is triggered in the following situations when the alarm is set: ● A locked door is unlocked or opened in any way other than using the entry function (vehicles with a smart key system) or wireless remote control.
Page 78 1-2. Theft deterrent system ■ System maintenance The vehicle has a maintenance-free type alarm system. ■ Items to check before locking the vehicle To prevent unexpected triggering of the alarm and vehicle theft, make sure of the following: Nobody is in the vehicle. ●...
Page 79 1-2. Theft deterrent system ■ Alarm-operated door lock In the following situations, the doors are locked automatically: When a person left in the vehicle triggers the alarm by unlocking a door or ● the back door. When a person left in the vehicle unlocks a door or the back door while the ●...
Page 80: Theft Prevention Labels (For U.s.a.)
1-2. Theft deterrent system Theft prevention labels (for U.S.A.) These labels are attached to the vehicle to reduce vehicle theft by facilitating the tracing and recov- ery of parts from stolen vehicles. Do not remove under penalty of law. SIENNA_OM_01999-08001_(U)
Page 81: Instrument Cluster
Instrument cluster Instrument cluster Warning lights and indicators ......82 Gauges and meters .... 87 Multi-information display (with monochrome display) ......90 Multi-information display (with color display) .... 93 Fuel consumption information ...... 100 SIENNA_OM_01999-08001_(U)
Page 82: Instrument Cluster Warning Lights And Indicators
2. Instrument cluster Warning lights and indicators The warning lights and indicators on the instrument cluster and center panel inform the driver of the status of the vehicle’s vari- ous systems. For the purpose of explanation, the following illustration dis- plays all warning lights and indicators illuminated.
Page 83 2. Instrument cluster Warning lights Warning lights inform the driver of malfunctions in the indicated vehi- cle’s systems. Electric power steering Brake system warning system warning light light (P. 537) (P. 538) (U.S.A.) 1, 2, 3 Brake system warning Pre-collision system light (P.
Page 84: Indicators
They will turn off after the engine is started, or after a few seconds. There may be a malfunction in a system if a light does not come on, or if the lights do not turn off. Have the vehicle inspected by your Toyota dealer. : If equipped : The light flashes to indicate a malfunction.
Page 85 There may be a malfunction in a system if a light does not come on, or if the lights do not turn off. Have the vehicle inspected by your Toyota dealer. : The light flashes to indicate that the system is operating.
Page 86 Have the vehicle inspected by your Toyota dealer immedi- ately if this occurs.
Page 87: Gauges And Meters
2. Instrument cluster Gauges and meters The displayed content may differ depending on the type of meter. Vehicles with monochrome display  Vehicles with color display  SIENNA_OM_01999-08001_(U)
Page 88 2. Instrument cluster Tachometer Displays the engine speed in revolutions per minute Multi-information display Presents the driver with a variety of driving-related data (P. 90, 93) Speedometer Displays the vehicle speed Fuel gauge Displays the quantity of fuel remaining in the tank Odometer/trip meter display change button Outside temperature P.
Page 89 (P. 84) When “--” or “E” is displayed, the system may be malfunctioning. Take your ● vehicle to your Toyota dealer. NOTICE ■ To prevent damage to the engine and its components Do not let the indicator needle of the tachometer enter the red zone, which ●...
Page 90: Multi-Information Display (With Monochrome Display)
2. Instrument cluster Multi-information display (with monochrome display) Display contents The multi-information display presents the driver with a variety of driving-related data. ● Drive information ● Warning messages (P. 546) Drive information Items displayed can be switched by pressing the “DISP” switch. ●...
Page 91 2. Instrument cluster ● Distance Displays the estimated maximum distance that can be driven with the quantity of fuel remaining and the distance driven after the func- tion was reset respectively. • This distance is computed based on your average fuel consumption. As a result, the actual distance that can be driven may differ from that dis- played.
Page 92 2. Instrument cluster ■ Setting display automatic cancelation In the following situations, setting display in which the settings can be changed through the “DISP” switch will automatically be turned off. If a warning message appears while the setting display is displayed ●...
Page 93: Multi-Information Display (With Color Display)
2. Instrument cluster Multi-information display (with color display) Display contents The multi-information display pre- sents the driver with a variety of vehicle data. ● Menu icons Displays the following information when an icon is selected. (P. 94) Some of the information may be displayed automatically depending on the situation.
Page 94 2. Instrument cluster Dynamic radar cruise control display (if equipped) Select to display the information and operation procedures of the dynamic radar cruise control. (P. 261) tab will change to when the vehicle is in constant speed control mode. (P. 267) Warning message display Select to display warning messages and measures to be taken if a malfunction is detected.
Page 95 2. Instrument cluster Drive information 1, 2 ● Average fuel economy Displays the average fuel consumption since the function was reset. 1, 2 ● Tank average fuel economy Displays the average fuel consumption since the vehicle was refu- eled. 1, 2 ●...
Page 96 2. Instrument cluster ● AWD control (if equipped) Displays the torque distribution between the front and rear axles of the AWD control system ● Display off A blank screen is displayed. : Can be registered to Drive information 1 through 3. (P. 97) : Use the displayed fuel consumption as a reference.
Page 97 2. Instrument cluster Settings display The settings of the following items can be changed, refer to P. 617 ● Language Select to change the language on the display. ● Units Select to change the unit for measure of the fuel consumption and outside temperature.
Page 98 2. Instrument cluster ● Speed limit display (if equipped) Select to set the display of speed limit information stored in the nav- igation system to on with the speed limit caution indicator (yellow) enabled, on with the speed limit caution not enabled, or off. If enabled, the speed limit caution indicator will come on if the vehicle speed exceeds the displayed speed limit.
Page 99 2. Instrument cluster WARNING ■ The information display at low temperatures Allow the interior of the vehicle to warm up before using the liquid crystal information display. At extremely low temperatures, the display monitor may respond slowly, and display changes may be delayed. For example, there is a lag between the driver’s shifting and the new gear number appearing on the display.
Page 100: Fuel Consumption Information
2. Instrument cluster Fuel consumption information Fuel consumption information can be displayed on the audio system screen. Audio system screen “CAR” button (type A) “APPS” button (type B) Trip information Type A  Press the “CAR” button. Type B  Press the “APPS”...
Page 101 2. Instrument cluster Past record Type A  Press the “CAR” button. Type B  Press the “APPS” button, and then select “Eco” on the screen. If the “Trip Information” screen is displayed, select “Past Record”. Reset the past record data Best recorded fuel consumption Average fuel consumption (if equipped)
Page 102 2. Instrument cluster SIENNA_OM_01999-08001_(U)
Page 103: Operation Of Each Component
Operation of each component 3-1. Key information Keys ........104 3-2. Opening, closing and locking the doors Front doors......110 Sliding doors ..... 121 Back door......132 Smart key system ..... 142 3-3. Adjusting the seats Front seats ......148 Rear seats......
Page 104: Keys
3-1. Key information Keys The keys The following keys are provided with the vehicle. Vehicles without a smart key system  Master keys (black) Valet key (gray) Key number plate Vehicles with a smart key system  Electronic keys • Operating the smart key system (P.
Page 105 3-1. Key information Wireless remote control Vehicles without a smart key system (type A)  Locks all doors (P. 111) Unlocks all doors (P. 111) Sounds the alarm (P. 106) Vehicles without a smart key system (type B)  Locks all doors (P. 111) Unlocks all doors (P.
Page 106 3-1. Key information Using the mechanical key (vehicles with a smart key system) To take out the mechanical key, push the release button and take the key out. The mechanical key can only be inserted in one direction, as the key only has grooves on one side.
Page 107 ■ If you lose your keys New genuine keys can be made by your Toyota dealer using a master key (vehicles without a smart key system) or the other key (vehicles with a smart key system) and the key number stamped on your key number plate. Keep the plate in a safe place such as your wallet, not in the vehicle.
Page 108 P. 503 ■ Confirmation of the registered key number The number of keys already registered to the vehicle can be confirmed. Ask your Toyota dealer for details. ■ Certification for wireless remote control (vehicles without a smart key system) This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada.
Page 109 When a vehicle key is lost (vehicles with a smart key system) If the key remains lost, the risk of vehicle theft increases significantly. Visit your Toyota dealer immediately with all remaining electronic keys that were provided with your vehicle.
Page 110: Front Doors
3-2. Opening, closing and locking the doors Front doors Unlocking and locking the doors from the outside ◆ Entry function (vehicles with a smart key system) Carry the electronic key to enable this function. Grip the driver’s door handle to unlock the door. Grip the passenger’s door handle to unlock all the doors.
Page 111 3-2. Opening, closing and locking the doors ◆ Wireless remote control Vehicles without a smart key system (type A)  Locks all doors Check that the door is securely locked. Unlocks all doors Pressing the button unlocks the driver’s side doors. Pressing the button again within 3 seconds unlocks the other doors.
Page 112 3-2. Opening, closing and locking the doors ◆ Vehicles without a smart key system  Locks all the doors Unlocks all the doors Turning the key unlocks the driver’s side doors. Turning the key again within 3 seconds unlocks the other doors. Vehicles with a smart key system ...
Page 113 3-2. Opening, closing and locking the doors ■ Operation signals A buzzer sounds and the emergency flashers flash to indicate that the doors have been locked/unlocked. (Locked: Once; Unlocked: Twice) ■ Security feature If a door is not opened within approximately 60 seconds after the vehicle is unlocked, the security feature automatically locks the vehicle again.
Page 114 3-2. Opening, closing and locking the doors Unlocking and locking the doors from the inside ◆ Door lock switch Locks all the doors Unlocks all the doors ◆ Inside lock button Locks the door Unlocks the door The front doors can be opened by pulling the inside handle even if the lock buttons are in the lock position.
Page 115 3-2. Opening, closing and locking the doors Automatic door locking and unlocking systems The following functions can be set or cancelled: For instructions on customizing, refer to P. 622 Function Operation Shift position linked door Shifting the shift lever out of P locks all the locking function doors.
Page 116 3-2. Opening, closing and locking the doors Shift the shift lever to P or N, and press and hold the door lock switch ( ) for approximately 5 seconds and then release. The shift lever and switch posi- tions corresponding desired function to be set are shown in the following table.
Page 117 3-2. Opening, closing and locking the doors ■ Switching the door unlock function (vehicles with a smart key system) It is possible to set which doors the entry function unlocks using the wireless remote control. Turn the engine switch off. When the indicator on the key surface is not on, press and hold for about 5 seconds while pressing and holding The setting changes each time an operation is performed, as shown below.
Page 118 3-2. Opening, closing and locking the doors ■ When all the doors are locked with the wireless remote control or key The doors cannot be unlocked with the door lock switch. The door lock switch can be reset by unlocking all the doors with the wireless remote control or key.
Page 119 3-2. Opening, closing and locking the doors Vehicles with a smart key system  The smart key system uses weak radio waves. In the following situations, the communication between the electronic key and the vehicle may be affected, preventing the smart key system and wireless remote control from operating properly.
Page 120 3-2. Opening, closing and locking the doors WARNING ■ To prevent an accident Observe the following precautions while driving the vehicle. Failing to do so may result in a door opening and an occupant falling out, resulting in death or serious injury. Ensure that all doors are properly closed and locked.
Page 121: Sliding Doors
3-2. Opening, closing and locking the doors Sliding doors Vehicles without power sliding doors  The sliding doors can be opened and closed using the sliding door handle. The sliding door can be locked and unlocked using the wireless remote control, door lock switch or inside lock knob.
Page 122 3-2. Opening, closing and locking the doors Locking/unlocking the sliding door from inside ◆ Door lock switch P. 114 ◆ Inside lock knobs Unlocks Locks Opening/closing the sliding door ◆ Sliding door handle Open/close Vehicles with power sliding doors: The sliding door will be automatically and completely opened and closed by the fol- lowing.
Page 123 3-2. Opening, closing and locking the doors ◆ Power sliding door switches (vehicles with power sliding doors) Press and hold the switch to open and close each sliding door. From front seats From second seats   Left side power sliding door Right side power sliding door Pressing the switch again while the door is operating will cause the opera- tion to reverse.
Page 124 3-2. Opening, closing and locking the doors ◆ Wireless remote control (vehicles with power sliding doors) Press and hold the switch to open/close the power sliding door. Vehicles without a smart key Vehicles with a smart key sys-   system Left side power sliding door Right side power sliding door...
Page 125 3-2. Opening, closing and locking the doors Locking the sliding doors from the outside without the wireless remote control Move the inside lock knob to the lock position. Close the sliding door. Sliding door child-protector locks sliding door cannot opened by the inside door handle and the second seat sliding door switch when the lock is set.
Page 126 3-2. Opening, closing and locking the doors ■ Power sliding doors If the power sliding door outside handle is pulled while the power sliding ● door is opening or closing, the door will reverse the operation direction. During opening operation: ●...
Page 127 When the power sliding door detects an abnormality and stops opening and can not be completely closed manually, cancel the function as follows and close the door manually. After that, have the vehicle inspected and repaired by your Toyota dealer. Remove the plug from the rear edge of the sliding door.
Page 128 3-2. Opening, closing and locking the doors ■ When the battery is disconnected (vehicles with power sliding doors) The power sliding door system must be initialized in order to ensure proper operation. To initialize it, close the sliding doors completely by hand. ■...
Page 129 3-2. Opening, closing and locking the doors WARNING When the vehicle is stopped on a slope, ● the door will slide faster when opening or closing, so be especially careful that the passengers do not get hit or pinched by the door. Open the sliding door fully while pas- ●...
Page 130 IGNITION ON mode (vehicles with a smart key system) or the engine is started during automatic operation Do not attach any accessories other than genuine Toyota parts to the ● power sliding door. The power sliding door may not operate, causing itself to malfunction, or the power sliding door may close again after it is opened.
Page 131 3-2. Opening, closing and locking the doors WARNING ■ Jam protection function (vehicles with power sliding doors) Observe the following precautions. Failure to do so may cause death or serious injury. Never use any part of your body to intentionally activate the jam protection ●...
Page 132: Back Door
3-2. Opening, closing and locking the doors Back door The back door can be locked/unlocked and opened/closed by the following procedures. Locking and unlocking the back door ◆ Entry function (vehicles with a smart key system) Carry the electronic key to enable this function. Press the unlock button to unlock all the doors.
Page 133 3-2. Opening, closing and locking the doors Opening/closing the back door from inside the vehicle (vehicles with power back door) Press and hold the switch to open/ close the back door. Pressing the switch again while the power back door is operating will cause the operation to reverse.
Page 134 3-2. Opening, closing and locking the doors ◆ Wireless remote control (vehicles with power back door) Press and hold the switch to open/close the power back door. Vehicles without a smart key Vehicles with a smart key sys-   system Pressing the switch again while the power back door is operating will cause the operation to reverse.
Page 135 3-2. Opening, closing and locking the doors When closing the back door Lower the back door using the back door handle, and make sure to push the back door down from the outside to close it. Canceling the power back door system (vehicles with power back door) Turn the main switch off to disable the power back door system.
Page 136 3-2. Opening, closing and locking the doors ■ Luggage compartment light The luggage compartment light turns on when the back door is opened with the luggage compartment light switch on. ■ If the back door opener is inoperative The back door can be operated from the inside. Remove the inside panel.
Page 137 3-2. Opening, closing and locking the doors ■ The power back door can be operated when (vehicles with power back door) The shift lever is in P. ● The back door is unlocked. ● ■ Power back door operation (vehicles with power back door) A buzzer sounds and the emergency flashers flash twice to indicate that the ●...
Page 138 3-2. Opening, closing and locking the doors WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ■ Before driving Make sure that the back door is fully closed. If the back door is not fully ●...
Page 139 When installing an accessory part to the back door, using a genuine Toyota part is recommended. ■ Back door closer (if equipped) In the event that the back door is left ●...
Page 140 When installing an accessory part to the back door, ask your Toyota dealer for details. ■ Jam protection function (vehicles with power back door) Observe the following precautions.
Page 141 Do not touch the damper stay rod with ● gloves or other fabric items. Do not attach any accessories other ● than genuine Toyota parts to the back Damper stays door. Do not place your hand on the damper stay or apply lateral forces to it. ●...
Page 142: Smart Key System
3-2. Opening, closing and locking the doors  Smart key system The following operations can be performed simply by carrying the electronic key on your person, for example in your pocket. The driver should always carry the electronic key. ● Locks and unlocks the doors •...
Page 143 3-2. Opening, closing and locking the doors ■ Effective range (areas within which the electronic key is detected) When locking or unlocking the doors The system can be operated when the electronic key is within about 2.3 ft. (0.7 m) of either of the front out- side door handles.
Page 144 3-2. Opening, closing and locking the doors ■ Battery-saving function In the following circumstances, the entry function is disabled in order to pre- vent the vehicle battery from discharging and the electronic key battery from discharging. When the entry function has not been used for 5 days or more ●...
Page 145 3-2. Opening, closing and locking the doors ■ Note for locking the doors Touching the door lock sensor while wearing gloves may delay or prevent ● lock operation. Remove the gloves and touch the lock sensor again. When the lock operation is performed using the lock sensor, recognition sig- ●...
Page 146 3-2. Opening, closing and locking the doors ■ To operate the system properly Make sure to carry the electronic key when operating the system. Do not get the electronic key too close to the vehicle when operating the system from the outside of the vehicle.
Page 147 (P. 142) The radio waves may affect the operation of such devices. If necessary, the entry function can be disabled. Ask your Toyota dealer for details, such as the frequency of radio waves and timing of the emitted radio waves.
Page 148: 3-3. Adjusting The Seats
3-3. Adjusting the seats Front seats Adjustment procedure Manual seat  Seat position adjustment lever Seatback angle adjustment lever Vertical height adjustment lever (driver’s side only) Lumbar support adjustment switch (driver’s side only)* : If equipped Power seat  Seat position adjustment switch Seatback angle adjustment switch Seat cushion (front) angle adjustment switch (driver’s side only) Vertical height adjustment switch (driver’s side only)
Page 149 3-3. Adjusting the seats Active head restraints When the occupant’s lower back presses against the seatback dur- ing a rear-end collision, the head restraint moves slightly forward and upward to help reduce the risk of whiplash on the seat occu- pant.
Page 150 3-3. Adjusting the seats WARNING ■ When adjusting the seat position Take care when adjusting the seat position to ensure that other passen- ● gers are not injured by the moving seat. Do not put your hands under the seat or near the moving parts to avoid ●...
Page 151: Rear Seats
3-3. Adjusting the seats Rear seats Adjustment procedure ■ Second seat Tip-up seat (7-passenger models)  Seat position adjustment lever Seatback angle adjustment lever Tip-up seat (8-passenger models)  Seat position adjustment lever Seatback angle adjustment lever SIENNA_OM_01999-08001_(U)
Page 152 3-3. Adjusting the seats Ottoman seat  Seat position adjustment lever Seatback angle adjustment lever Ottoman angle adjustment lever AUTO ACCESS SEAT  Refer to “AUTO ACCESS SEAT OWNER’S MANUAL”. ■ Third seats Manual seat  Seatback angle adjustment strap SIENNA_OM_01999-08001_(U)
Page 153 3-3. Adjusting the seats Power seat  Seatback angle adjustment switch Moving a second seat for third seat access ■ Getting in the vehicle Tip-up seats  Pull the seatback angle adjust- ment lever and fold down the seatback. The cushion will tip up.
Page 154 3-3. Adjusting the seats ■ Getting out of the vehicle Tip-up seats  Pull the strap and fold down the seatback. The cushion will tip up. The seat can slide forward. Move the seat to the frontmost position. Make sure that no passenger is seated on the second seat before pulling the strap.
Page 155 3-3. Adjusting the seats Removing the second seats ■ Removing the second outside seats (Tip-up seats) Pull the armrests up. Pull the seatback adjustment lever and fold down the seat- back. The cushion will tip up. Slide the seat forward to a lock position. Pull the release lever under the cushion and simulta- neously...
Page 156 3-3. Adjusting the seats ■ Removing the second center seat (if equipped) Pull the lock release strap and fold down the second center seatback. Make sure that head restraint is in the lowest position. Pull the lock release strap under the seat to remove the seat.
Page 157 3-3. Adjusting the seats Installing the second seats ■ Installing the second outside seats Align the marking on the seat side cover to the marking on the rail cover and align the marking on the seat front/back cover to the rail. Tip-up seat Ottoman seat ...
Page 158 3-3. Adjusting the seats ■ Installing the second center seats (if equipped) Engage the rear pins with the hooks. Unfold the cushion leg and push down on the seat to engage the front lock. Unfold the seatback and lock Make sure the seat is locked in place by trying to shake the seatback and lift up the seat cushion.
Page 159 3-3. Adjusting the seats ■ Folding down the third seatbacks Pull the “TO FOLD/LIFT SEAT- BACK” strap and fold down the seatback. ■ Returning the third seatbacks Pull the “TO FOLD/LIFT SEAT- BACK” strap, and raise the seatback and the outside head restraints.
Page 160 3-3. Adjusting the seats ■ Folding down the third seatbacks Press folding/returning switch. ■ Returning the third seatbacks Press the folding/returning switch, returning switch (P. 163) or seatback angle adjustment switch (P. 153). Stowing the third seats (manual seats) Before stowing or returning third seat, remove any items from the floor area to prevent interference with moving parts.
Page 161 3-3. Adjusting the seats ■ Stowing the third seats Pull the handle to move the seat rearward. Then push the seat down. The outside head restraints are folded automatically. Push the seat against the floor. Open the flaps. ■ Before returning the third seats Be sure to move the second seats forward from the rearmost posi- tion, as they may interfere with the third seats returning operation.
Page 162 3-3. Adjusting the seats ■ Returning the third seats Return the flaps. Pull the handle and lift up the seat rearward. Push the seat forward and then engage the front leg locks. Make sure the front and rear legs are locked securely. Raise the seatback and the outside head restraints.
Page 163 3-3. Adjusting the seats ■ Stowing the third seats Press and hold the stowing switch. A beep sounds twice to indicate the start of the operation. The beep sounds again twice when the operation is completed. Open the flaps. ITN13N056 ■...
Page 164 3-3. Adjusting the seats ■ Power third seat (vehicles with power third seat) If the indicator light above the switches flashes three times when the folding/ ● returning switch is pressed, the folding operation will not start. Make sure the shift lever is in P. If any of the following conditions occur while the seat is operating, the seat ●...
Page 165 3-3. Adjusting the seats WARNING ■ When folding the rear seatbacks down Observe the following precautions. Failure to do so may result in death or serious injury. Do not fold the seatbacks down while driving. ● Stop the vehicle on level ground, set the parking brake and shift the shift ●...
Page 166 3-3. Adjusting the seats WARNING ■ Stowing the third seats Make sure that the seat path is clear before moving the seat. Otherwise, ● injury may result from contact with, or by being pinched by parts of the seat. Manual third seats: Do not sit on the third seat when it is in the stowed ●...
Page 167 3-3. Adjusting the seats NOTICE ■ To prevent damage to the seat Avoid putting heavy loads on a folded seat that is being used as a tempo- ● rary table. Do not sit on or put heavy loads on a second seat that has been removed ●...
Page 168: Driving Position Memory
3-3. Adjusting the seats  Driving position memory This feature automatically adjusts the driver’s seat and outside rear view mirrors to make entering and exiting the vehicle easier or to suit your preferences. Power easy access system The seat is automatically adjusted to allow the driver to enter and exit the vehicle easily.
Page 169 3-3. Adjusting the seats Driving position memory Your preferred driving position (the position of the driver’s seat and outside rear view mirrors) can be recalled by pressing a button. Two different driving positions can be recorded into memory. ■ Recording procedure Check that the shift lever is in P.
Page 170 3-3. Adjusting the seats ■ To stop the position recall operation part-way through Perform any of the following: Press the “SET” button. ● Press button “1” or “2”. ● Operate any of the seat adjustment switches (only cancels seat position ●...
Page 171 3-3. Adjusting the seats ■ Recall procedure Carry the electronic key that has been registered to the driving position, and then unlock and open the driver’s door using the smart key system or wireless remote control. The driving position will move to the recorded position. If the driving position is in a position that has already been recorded, the seat and outside rear view mirrors will not move.
Page 172: Head Restraints
3-3. Adjusting the seats Head restraints Head restraints are provided for all seats. Front and second outside seats Pull the head restraints up. Down Push the head restraint down while pressing the lock release button. Lock release button Second center and third center seats Pull the head restraints up.
Page 173 3-3. Adjusting the seats ■ Removing the head restraints Front and second outside seats  Pull the head restraint up while pressing the lock release button. Lock release button Second center and third center seats  Pull the head restraint up while pressing the lock release button.
Page 174 3-3. Adjusting the seats ■ Installing the head restraints Front and second outside seats  Align the head restraint with the installa- tion holes and push it down to the lock position. Press and hold the lock release button when lowering the head restraint. Lock release button Second center and third center seats...
Page 175 3-3. Adjusting the seats WARNING ■ Head restraint precautions Observe the following precautions regarding the head restraints. Failure to do so may result in death or serious injury. Use the head restraints designed for each respective seat. ● Adjust the head restraints to the correct position at all times. ●...
Page 176: Steering Wheel
3-4. Adjusting the steering wheel and mirrors Steering wheel Adjustment procedure Hold the steering wheel and push the lever down. Adjust to the ideal position by moving the steering wheel hori- zontally and vertically. After adjustment, pull the lever up to secure the steering wheel.
Page 177 3-4. Adjusting the steering wheel and mirrors WARNING ■ Caution while driving Do not adjust the steering wheel while driving. Doing so may cause the driver to mishandle the vehicle and cause an acci- dent, resulting in death or serious injury. ■...
Page 178: Inside Rear View Mirror
3-4. Adjusting the steering wheel and mirrors Inside rear view mirror The rear view mirror’s position can be adjusted to enable suffi- cient confirmation of the rear view. Adjusting the height of rear view mirror The height of the rear view mirror can be adjusted to suit your driving posture.
Page 179 3-4. Adjusting the steering wheel and mirrors Auto anti-glare inside rear view mirror  Responding to the level of brightness of the headlights of vehicles behind, the reflected light is automatically reduced. Changing automatic anti-glare function mode On/off When the automatic anti-glare function is in on mode, the indica- tor illuminates.
Page 180: Outside Rear View Mirrors
3-4. Adjusting the steering wheel and mirrors Outside rear view mirrors Adjustment procedure To select a mirror to adjust, turn the switch. Left Right To adjust the mirror, move the switch. Right Down Left Folding and extending the mirrors Manual type ...
Page 181 3-4. Adjusting the steering wheel and mirrors Power type  Press the switch. Folding Extending Linked mirror function when reversing (if equipped) When the mirror select switch is in the L or R position, the outside rear view mirrors will automatically angle downwards when the vehicle is reversing in order to give a better view of the ground.
Page 182 3-4. Adjusting the steering wheel and mirrors ■ Mirror angle can be adjusted when Vehicles without a smart key system  The engine switch is in the “ACC” or “ON” position. Vehicles with a smart key system  The engine switch is in ACCESSORY or IGNITION ON mode. ■...
Page 183: Power Windows
3-5. Opening, closing the windows and moon roof Power windows Opening and closing procedures The power windows can be opened and closed using the switches. Operating the switch moves the windows as follows: Closing One-touch closing Opening One-touch opening : To stop the window partway, oper- ate the switch in the opposite direc- tion.
Page 184 If you release the switch while the window is moving, start again from the beginning. If the window continues to close but then re-open slightly even after performing the above procedure correctly, have the vehicle inspected by your Toyota dealer. SIENNA_OM_01999-08001_(U)
Page 185 3-5. Opening, closing the windows and moon roof WARNING Observe the following precautions. Failing to do so may result in death or serious injury. ■ Closing the windows The driver is responsible for all the power window operations, including the ●...
Page 186: Quarter Windows
3-5. Opening, closing the windows and moon roof Quarter windows The quarter windows can be opened to bring in fresh outside air for additional ventilation. Opening and closing procedures Manual type  Pull the handle and swing the win- dow fully out to open. Power type ...
Page 187 3-5. Opening, closing the windows and moon roof ■ The windows can be operated when (power type) The engine switch is in the “ON” position (vehicles without a smart key sys- tem) or IGNITION ON mode (vehicles with a smart key system). ■...
Page 188: Moon Roof
3-5. Opening, closing the windows and moon roof  Moon roof Use the overhead switches to open and close the moon roof. Opening and closing ■ Front moon roof Vehicles without a rear moon Vehicles with a rear moon roof ...
Page 189 3-5. Opening, closing the windows and moon roof Canceling the rear moon roof operation (vehicles with the rear moon roof) Press the switch to disable the rear moon roof operation from the rear seat. Pressing the switch again will enable the operation again. ■...
Page 190 3-5. Opening, closing the windows and moon roof ■ Sunshade The sunshade can be opened and closed manually. However, both front and rear sunshades open automatically when the moon roof is opened. ■ When the moon roof does not close normally Stop the vehicle.
Page 191: Driving
Driving 4-1. Before driving 4-3. Operating the lights Driving the vehicle..... 192 and wipers Headlight switch....237 Cargo and luggage ... 201 Automatic High Beam ..242 Vehicle load limits ..... 207 Fog light switch ....247 Trailer towing (with towing package) ..208 Windshield wipers and washer ......
Page 192: Driving The Vehicle
4-1. Before driving Driving the vehicle The following procedures should be observed to ensure safe driving: Starting the engine P. 223, 226 Driving With the brake pedal depressed, shift the shift lever to D. (P. 231) Release the parking brake. (P. 236) Gradually release the brake pedal and gently depress the accelera- tor pedal to accelerate the vehicle.
Page 193 Your vehicle has a drum-in-disc type parking brake system. This type of brake system needs bedding-down of the brake shoes periodically or whenever the parking brake shoes and/or drum are replaced. Have your Toyota dealer per- form the bedding down operation.
Page 194 4-1. Before driving ■ Operating your vehicle in a foreign country Comply with the relevant vehicle registration laws and confirm the availability of the correct fuel. (P. 596) WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ■...
Page 195 4-1. Before driving WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ■ When driving the vehicle During normal driving, do not turn off the engine. Turning the engine off ● while driving will not cause loss of steering or braking control, but the power assist to these systems will be lost.
Page 196 4-1. Before driving WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ■ When driving on slippery road surfaces Sudden braking, acceleration and steering may cause tire slippage and ● reduce your ability to control the vehicle. Sudden acceleration, engine braking due to shifting, or changes in engine ●...
Page 197 If you hear a squealing or scraping noise (brake pad wear limit indica- tors) Have the brake pads checked and replaced by your Toyota dealer as soon as possible. Rotor damage may result if the pads are not replaced when needed.
Page 198 4-1. Before driving WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ■ When the vehicle is parked Do not leave cigarette lighters in the vehicle. If a cigarette lighter is in a ●...
Page 199 4-1. Before driving WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ■ When braking When the brakes are wet, drive more cautiously. ● Braking distance increases when the brakes are wet, and this may cause one side of the vehicle to brake differently than the other side.
Page 200 Engine damage caused by water immersion ● In the event that you drive on a flooded road and the vehicle is flooded, be sure to have your Toyota dealer check the following: Brake function ● Changes in quantity and quality of oil and fluid used for the engine, tran- ●...
Page 201: Cargo And Luggage
4-1. Before driving Cargo and luggage Take notice of the following information about storage precau- tions, cargo capacity and load: Capacity and distribution Cargo capacity depends on the total weight of the occupants. (Cargo capacity) = (Total load capacity) - (Total weight of occupants) Steps for Determining Correct Load Limit ...
Page 202 4-1. Before driving Calculation formula for your vehicle Cargo capacity Total load capacity (vehicle capacity weight) (P. 594) When 2 people with the combined weight of A lb. (kg) are riding in your vehicle, which has a total load capacity (vehicle capacity weight) of B lb.
Page 203 4-1. Before driving Roof luggage carrier (if equipped) ■ Roof luggage carrier components Roof rails Cross rails ■ Adjusting the position of cross rails Turn the knobs counterclock- wise to release the cross rails. Slide the cross rails to the appropriate position for load- ing luggage and turn the knobs clockwise to tighten...
Page 204 4-1. Before driving Seating configuration variation Cargo capacity Weight of the removed second seat If removing the second seats, it is possible to load extra cargo equal to the weight of the removed seats. (Cargo capacity) = (Total load capacity) - (Total weight of occupants) + (Weight of the removed second seats) Second seats weight: 7-passenger models...
Page 205 4-1. Before driving WARNING ■ Things that must not be carried in the luggage compartment The following things may cause a fire if loaded in the luggage compart- ment: Receptacles containing gasoline ● Aerosol cans ● ■ Storage precautions Observe the following precautions. Failure to do so may prevent the pedals from being depressed properly, may block the driver’s vision, or may result in items hitting the driver or passengers, possibly causing an accident.
Page 206 When loading cargo To use the roof rails as a roof luggage carrier, you must fit the roof rails with two or more genuine Toyota cross rails or their equivalent. When you load cargo on the roof luggage carrier, observe the following: Place the cargo so that its weight is distributed evenly between the ●...
Page 207: Vehicle Load Limits
4-1. Before driving Vehicle load limits Vehicle load limits include total load capacity, seating capacity, TWR (Trailer Weight Rating) and cargo capacity. ◆ Total load capacity (vehicle capacity weight): P. 594 Total load capacity means the combined weight of occupants, cargo and luggage.
Page 208: Trailer Towing (With Towing Package)
To tow a trailer safely, use extreme care and drive the vehicle in accordance with your trailer’s characteristics and operating conditions. Toyota warranties do not apply to damage or malfunction caused by towing a trailer for commercial purposes. Contact your Toyota dealer for further information about additional requirements such as a towing kit, etc.
Page 209 4-1. Before driving ■ GVWR (Gross Vehicle Weight Rating) The maximum allowable gross vehicle weight. The gross vehi- cle weight is the total weight of the vehicle. When towing a trailer, it is the sum of the vehi- cle weight (including the occu- pants, cargo and any optional equipment installed on the vehi- cle) and the tongue weight.
Page 210 4-1. Before driving ■ TWR (Trailer Weight Rating) The maximum allowable gross (With brakes) trailer weight. The gross trailer weight is the sum of the trailer weight and the weight of the cargo in the trailer. TWR is calculated assuming base vehicle with one driver, one front passenger, towing package, hitch and hitch sys-...
Page 211 ● If the gross trailer weight is over 2000 lbs. (907 kg), a sway control device with sufficient capacity is required.  : The towing package is required. Toyota does not recommend towing with this vehicle without the towing package. SIENNA_OM_01999-08001_(U)
Page 212 Unbraked TWR 1000 lb. (454 kg)  : These models meet the tow-vehicle trailering requirement of SAE Interna- tional per SAE J2807. The towing package is required. Toyota does not recommend towing with this vehicle without the towing package. SIENNA_OM_01999-08001_(U)
Page 213 Toyota hitch/bracket for your vehicle. For details, contact your Toyota dealer. ● If you wish to install a trailer hitch, contact your Toyota dealer. ● Use only a hitch that conforms to the gross trailer weight require- ment of your vehicle.
Page 214 4-1. Before driving Selecting trailer ball Use the correct trailer ball for your application. Trailer ball load rating Matches or exceeds the gross trailer weight rating of the trailer. Ball diameter Matches the size of the trailer cou- pler. Most couplers are stamped with the required trailer ball size.
Page 215 ● Speed limits for towing a trailer vary by state or province. Do not exceed the posted towing speed limit. ● Toyota recommends that the vehicle-trailer speed limit is 65 mph (104 km/h) on a flat, straight, dry road. Do not exceed this limit, the posted towing speed limit or the speed limit for your trailer as set forth in your trailer owner’s manual, whichever is lowest.
Page 216 4-1. Before driving ● Reversing with a trailer attached is difficult and requires practice. Grip the bottom of the steering wheel and move your hand to the left to move the trailer to the left. Move your hand to the right to move the trailer to the right.
Page 217 4-1. Before driving ● Due to the added load of the trailer, your vehicle’s engine may over- heat on hot days (at temperatures over 85°F [30°C]) when driving up a long or steep grade. If the Engine coolant temperature gauge overheating, immediately turn off the air conditioning (if in use), pull your vehicle off the road and stop in a safe spot.
Page 218 Break-in schedule If your vehicle is new or equipped with any new power train components (such as an engine, transmission, differential or wheel bearing), Toyota rec- ommends that you do not tow a trailer until the vehicle has been driven for over 500 miles (800 km).
Page 219 4-1. Before driving ■ Maintenance If you tow a trailer, your vehicle will require more frequent maintenance due ● to the additional load. (See “Scheduled Maintenance Guide” or “Owner’s Manual Supplement”.) Retighten the fixing bolts of the towing ball and bracket after approximately ●...
Page 220 4-1. Before driving WARNING ■ Trailer towing precautions To tow a trailer safely, use extreme care and drive the vehicle in accordance with the trailer’s characteristics and operating conditions. Failure to do so could cause an accident resulting in death or serious injury. Vehicle stability and braking performance are affected by trailer stability, brake setting and performance, and the hitch.
Page 221 NOTICE ■ When installing a trailer hitch Use only the position recommended by your Toyota dealer. Do not install the trailer hitch on the bumper; this may cause body damage. ■ Do not directly splice trailer lights Do not directly splice trailer lights.
Page 222: Dinghy Towing
4-1. Before driving Dinghy towing Your vehicle is not designed to be dinghy towed (with 4 wheels on the ground) behind a motor home. NOTICE ■ To avoid serious damage to your vehicle Do not tow your vehicle with four wheels on the ground.
Page 223: Engine (Ignition) Switch (Vehicles Without A
4-2. Driving procedures Engine (ignition) switch (vehicles without a smart key system) Starting the engine Check that the parking brake is set. Check that the shift lever is set in P. Firmly depress the brake pedal. Turn the engine switch to the “START” position to start the engine. Changing the engine switch positions “LOCK”...
Page 224 “LOCK” position. ■ If the engine does not start The engine immobilizer system may not have been deactivated. (P. 75) Contact your Toyota dealer. ■ When the steering lock cannot be released When starting the engine, the engine switch may seem stuck in the “LOCK”...
Page 225 4-2. Driving procedures NOTICE ■ To prevent battery discharge Do not leave the engine switch in the “ACC” or “ON” position for long peri- ods of time without the engine running. ■ When starting the engine Do not crank the engine for more than 30 seconds at a time. This may ●...
Page 226: Engine (Ignition) Switch (Vehicles With A Smart Key System)
4-2. Driving procedures Engine (ignition) switch (vehicles with a smart key system) Performing the following operations when carrying the elec- tronic key on your person starts the engine or changes engine switch modes. Starting the engine Check that the parking brake is set. Check that the shift lever is set in P.
Page 227 4-2. Driving procedures Stopping the engine Stop the vehicle. Shift the shift lever to P. Set the parking brake. (P. 236) Press the engine switch. Release the brake pedal and check that the indicator on the engine switch is off. Changing engine switch modes Modes can be changed by pressing the engine switch with the brake pedal released.
Page 228 Electronic key battery depletion P. 107 ■ Conditions affecting operation P. 119 ■ Note for the entry function P. 144 ■ If the engine does not start The engine immobilizer system may not have been deactivated. (P. 75) Contact your Toyota dealer. SIENNA_OM_01999-08001_(U)
Page 229 4-2. Driving procedures ■ Steering lock After turning the engine switch off and opening and closing the doors, the steering wheel will be locked due to the steering lock function. Operating the engine switch again automatically cancels the steering lock. ■...
Page 230 ■ Symptoms indicating a malfunction with the engine switch If the engine switch seems to be operating somewhat differently than usual, such as the switch sticking slightly, there may be a malfunction. Contact your Toyota dealer immediately. SIENNA_OM_01999-08001_(U)
Page 231: Automatic Transaxle
4-2. Driving procedures Automatic transaxle Shifting the shift lever While the engine switch is in the “ON” position (vehicles without a smart key system) or IGNITION ON mode (vehicles with a smart key system), move the shift lever with the brake pedal depressed.
Page 232 4-2. Driving procedures Shift position purpose Shift position Function Parking the vehicle/starting the engine Reversing Neutral Normal driving S mode driving (P. 232) : Shifting to the D position allows the system to select a gear suitable for the driving conditions. Setting the shift lever to the D position is recom- mended for normal driving.
Page 233 4-2. Driving procedures ■ Shift ranges and their functions ● Automatically selecting gears between 1 and 6 according to vehi- cle speed and driving conditions. But, the gear is limited accord- ing to selected shift range. ● You can choose from 6 levels of engine braking force. ●...
Page 234 If “S” does not come on even after shifting the shift lever to S This may indicate a malfunction in the automatic transaxle system. Have the vehicle inspected by your Toyota dealer immediately. (In this situation, the transaxle will operate in the same manner as when the shift lever is in D.) ■...
Page 235: Turn Signal Lever
4-2. Driving procedures Turn signal lever Operating instructions Right turn Left turn Lane change to the right (move the lever partway and release The right hand signals will flash 3 times. Lane change to the left (move the lever partway and release The left hand signals will flash 3 times.
Page 236: Parking Brake
4-2. Driving procedures Parking brake Operating instructions To set the parking brake, fully depress the parking brake pedal with your left foot while depress- U.S.A. Canada ing the brake pedal with your right foot. (Depressing pedal again releases the parking brake.) ■...
Page 237: Headlight Switch
4-3. Operating the lights and wipers Headlight switch The headlights can be operated manually or automatically. Operating instructions Turning the end of the lever turns on the lights as follows: The illustration is intended as an example. U.S.A. Canada  ...
Page 238 4-3. Operating the lights and wipers Off. (U.S.A.) The daytime running light system is off. (U.S.A.) The daytime running light system is on. (Canada) : Vehicles without a daytime running light system : Vehicles with a daytime running light system Turning on the high beam headlights With the headlights on, push the lever away from you to turn...
Page 239 4-3. Operating the lights and wipers Manual headlight leveling dial (vehicles with discharge head- lights) The level of the headlight aim can be adjusted according to the num- ber of passengers and the loading condition of the vehicle. Raises the level of the head- lights Lowers the level of the head- lights...
Page 240 4-3. Operating the lights and wipers ■ Daytime running light system (if equipped) Bulb type: To make your vehicle more visible to other drivers, the headlights ● turn on automatically (at a reduced intensity) whenever the engine is started and the parking brake is released. Daytime running lights are not designed for use at night.
Page 241 4-3. Operating the lights and wipers ■ Automatic light off system Vehicles without a smart key system  When the headlights are on: The headlights and tail lights turn off 30 sec- ● onds after a door is opened and closed if the engine switch is turned to the “ACC”...
Page 242: Automatic High Beam
4-3. Operating the lights and wipers  Automatic High Beam The Automatic High Beam uses an in-vehicle camera sensor to assess the brightness of streetlights, the lights of oncoming and preceding vehicles, etc., and automatically turns high beam on or off as necessary. Activating the Automatic High Beam system Push the lever away from you with the headlight switch in the...
Page 243 4-3. Operating the lights and wipers Turning the high beam on/off manually ■ Switching to low beam Pull the lever to the original position. ■ Switching to high beam Turn the light switch to the position. SIENNA_OM_01999-08001_(U)
Page 244 4-3. Operating the lights and wipers ■ The Automatic High Beam can be operated when The engine switch is in the “ON” position (vehicles without a smart key sys- tem) or IGNITION ON mode (vehicles with a smart key system). ■...
Page 245 4-3. Operating the lights and wipers In the situations below, the system may not be able to correctly detect the ● surrounding brightness levels, and may flash or expose nearby pedestrians to the high beam. Therefore, you should consider turning the high beam on or off manually rather than relying on the Automatic High Beam system.
Page 246 ● Do not modify the vehicle. ● Do not replace windshield with a non-genuine windshield. ● Contact your Toyota dealer. ■ Headlight leveling When the vehicle is loaded, headlight level should be adjusted to appropri- ate dial setting. (P. 239)
Page 247: Fog Light Switch
4-3. Operating the lights and wipers  Fog light switch The fog lights secure excellent visibility in difficult driving con- ditions, such as in rain and fog. The illustration is intended as an example. Turns the fog lights on Turns the fog lights off : For U.S.A.
Page 248: Windshield Wipers And Washer
4-3. Operating the lights and wipers Windshield wipers and washer Operating the wiper lever The wiper operation is selected by moving the lever as follows. The illustration is intended as an example. Intermittent windshield wipers with interval adjuster  Intermittent windshield wiper operation Low speed windshield...
Page 249 4-3. Operating the lights and wipers Washer/wiper dual operation The wipers will automatically oper- ate a couple of times after the washer squirts. Rain-sensing windshield wipers (if equipped)  Rain-sensing wiper operation (“AUTO”) When “AUTO” is selected, the wipers will operate automatically when sensor detects falling rain.
Page 250 4-3. Operating the lights and wipers The sensor sensitivity can be adjusted when “AUTO” is selected. Increases the sensitivity Decreases the sensitivity Washer/wiper dual operation The wipers will automatically operate a couple of times after the washer squirts. ■ The windshield wipers and washer can be operated when The engine switch is in the “ON”...
Page 251 Do not operate the switch continually as the washer fluid pump may over- heat. ■ When a nozzle becomes blocked In this case, contact your Toyota dealer. Do not try to clear it with a pin or other object. The nozzle will be damaged. SIENNA_OM_01999-08001_(U)
Page 252: Rear Window Wiper And Washer
4-3. Operating the lights and wipers Rear window wiper and washer Operating the wiper lever Turning the end of the lever turns on the rear window wiper and washer. The illustration is intended as an example. Intermittent window wiper operation Normal window wiper...
Page 253 Do not operate the switch continually as the washer fluid pump may over- heat. ■ When a nozzle becomes blocked In this case, contact your Toyota dealer. Do not try to clear it with a pin or other object. The nozzle will be damaged. SIENNA_OM_01999-08001_(U)
Page 254: Cap
4-4. Refueling Opening the fuel tank cap Perform the following steps to open the fuel tank cap: Before refueling the vehicle ● Close all the doors and windows, and turn the engine switch to the “LOCK” position (vehicles without a smart key system) or off (vehi- cles with a smart key system).
Page 255: Refueling
4-4. Refueling WARNING ■ When refueling Observe the following precautions to prevent fuel overflowing from the fuel tank: Securely insert the fuel nozzle into the fuel filler neck. ● Stop filling the tank after the fuel nozzle automatically clicks off. ●...
Page 256 WARNING ■ When replacing the fuel cap Do not use anything but a genuine Toyota fuel tank cap designed for your vehicle. Doing so may cause a fire or other incident which may result in death or serious injury. SIENNA_OM_01999-08001_(U)
Page 257: Using The Driving Support
4-5. Using the driving support systems  Cruise control Summary of functions Use cruise control to maintain a set speed without depressing the accelerator pedal. Indicators Cruise control switch Setting the vehicle speed Press the “ON-OFF” button to activate the cruise control. Cruise control indicator will come or will be displayed on the multi-information display...
Page 258 4-5. Using the driving support systems Adjusting the set speed To change the set speed, operate the lever until the desired set speed is obtained. Increases the speed Decreases the speed Fine adjustment: Momentarily move the lever in the desired direc- tion.
Page 259 If the cruise control speed cannot be set or if the cruise control cancels imme- diately after being activated, there may be a malfunction in the cruise control system. Have the vehicle inspected by your Toyota dealer. SIENNA_OM_01999-08001_(U)
Page 260 4-5. Using the driving support systems WARNING ■ To avoid operating the cruise control by mistake Switch the cruise control off using the “ON-OFF” button when not in use. ■ Situations unsuitable for cruise control Do not use cruise control in any of the following situations. Doing so may result in loss of control and could cause an accident resulting in death or serious injury.
Page 261: Dynamic Radar Cruise Control
4-5. Using the driving support systems  Dynamic radar cruise control Summary of functions Dynamic radar cruise control supplements conventional cruise control with a vehicle-to-vehicle distance control. In vehicle-to-vehicle dis- tance control mode, the vehicle automatically accelerates or deceler- ates in order to maintain a set following distance from vehicles ahead. Multi-information display Indicators The indicators are intended as an...
Page 262 4-5. Using the driving support systems Setting the vehicle speed (vehicle-to-vehicle distance control mode) Press the “ON-OFF” button to activate the cruise control. Dynamic radar cruise control indi- cator will be displayed. Press the button again to deacti- vate the cruise control. Accelerate or decelerate the vehicle to the desired speed, and push the lever down to set...
Page 263 4-5. Using the driving support systems Adjusting the set speed To change the set speed, operate the lever until the desired set speed is displayed. Increases the speed Decreases the speed Fine adjustment: Momentarily move the lever in the desired direc- tion.
Page 264 4-5. Using the driving support systems Changing the vehicle-to-vehicle distance Pressing the button changes the vehicle-to-vehicle distance as fol- lows: Long Preceding Medium vehicle mark Short The vehicle-to-vehicle distance is set automatically to long mode when the engine switch is turned to IGNITION ON mode.
Page 265 4-5. Using the driving support systems Canceling and resuming the speed control Pulling the lever toward you cancels the cruise control. The speed setting is also canceled when the brakes are applied. Pushing the lever up resumes the cruise control and returns vehicle speed to the set speed.
Page 266 4-5. Using the driving support systems Example of deceleration cruising When the vehicle ahead is driving slower than the set speed When a vehicle is detected running ahead of you, the system automatically decelerates your vehicle. When a greater reduction in vehicle speed is necessary, the system applies the brakes.
Page 267 4-5. Using the driving support systems Selecting conventional constant speed control mode Constant speed control mode differs from vehicle-to-vehicle distance control mode. When constant speed control mode is selected, your vehicle will maintain a set speed regardless of whether or not there are other vehicles in the lane ahead.
Page 268 ● set to the “AUTO” mode or the high speed wiper operation position). If vehicle-to-vehicle distance control driving is automatically canceled for any other reason, there may be a malfunction in the system. Contact your Toyota dealer. ■ Automatic cancelation of constant speed control The cruise control will stop maintaining the vehicle speed in the following situ- ations.
Page 269 4-5. Using the driving support systems ■ Operation guide display When the dynamic radar cruise control switch is operated, a guidance dis- ● play is shown on the multi-information display for a few seconds as to how to operate the dynamic radar cruise control switch or distance switch. (P.
Page 270 4-5. Using the driving support systems WARNING ■ Before using dynamic radar cruise control Do not overly rely on vehicle-to-vehicle distance control. Be aware of the set speed. If automatic deceleration/acceleration is not appropriate, adjust the vehicle speed, as well as the distance between your vehicle and vehicles ahead by applying the brakes, etc.
Page 271 4-5. Using the driving support systems WARNING ■ Situations unsuitable for dynamic radar cruise control Do not use dynamic radar cruise control in any of the following situations. Doing so may result in inappropriate speed control and could cause an acci- dent resulting in death or serious injury.
Page 272 If the sensor moves even slightly off position, the system may malfunction. If the sensor or surrounding area is subject to a strong impact, always have the area inspected and adjusted by a Toyota dealer. Do not disassemble the sensor.
Page 273: Intuitive Parking Assist
4-5. Using the driving support systems  Intuitive parking assist The distance from your vehicle to nearby obstacles when paral- lel parking or maneuvering into a garage is measured by the sensors and communicated via the multi-information display, the audio system screen and a buzzer. Always check the sur- rounding area when using this system.
Page 274 4-5. Using the driving support systems Display When the sensors detect an obstacle, the following displays inform the driver of the position and distance to the obstacle. ■ Multi-information display Front corner sensor opera- tion Rear corner sensor operation Rear center sensor operation ■...
Page 275 4-5. Using the driving support systems Sensor detection display, obstacle distance ■ Distance display Sensors that detect an obstacle will illuminate continuously or blink. Approximate distance to obstacle Insert Display Front and rear display Rear center sensor corner sensor 5.9 ft. (180 cm) to ...
Page 276 4-5. Using the driving support systems ■ Buzzer operation and distance to an obstacle A buzzer sounds when the sensors are operating. ● The buzzer sounds faster as the vehicle approaches an obstacle. When the vehicle comes within the following distance of the obstacle, the buzzer sounds continuously.
Page 277 Press the “APPS” button. Select “Setup” on the screen. Select “Vehicle” on the screen. Select “TOYOTA Park Assist Settings” on the screen. Select the desired item. The buzzer sound volume can be adjusted. On or off can be selected for intuitive parking assist dis- play.
Page 278 • The area directly under the bumpers is not detected. • If obstacles draw too close to the sensor. • A non-genuine Toyota suspension (lowered suspension etc.) is installed. • People may not be detected if they are wearing certain types of clothing.
Page 279 4-5. Using the driving support systems The shape of the obstacle may prevent the sensor from detecting it. Pay ● particular attention to the following obstacles: • Wires, fences, ropes, etc. • Cotton, snow and other materials that absorb sound waves •...
Page 280 When using intuitive parking assist In the following situations, the system may not function correctly due to a sensor malfunction etc. Have the vehicle checked by your Toyota dealer. The intuitive parking assist operation display flashes, and a beep sounds ●...
Page 281: Rear View Monitor System
4-5. Using the driving support systems Rear view monitor system The rear view monitor system assists the driver by displaying an image of the view behind the vehicle and guide lines while back- ing up, for example while parking. The screen illustrations used in this text are intended as examples, and may differ from the image that is actually displayed on the screen.
Page 282 4-5. Using the driving support systems Using the rear view monitor system ■ Screen description The rear view monitor system screen will be displayed if the shift lever is shifted to R while the engine switch is in the “ON” position (vehicles without a smart key system) or IGNITION ON mode (vehi- cles with a smart key system).
Page 283 4-5. Using the driving support systems Rear view monitor system precautions ■ Area displayed on screen The rear view monitor system displays an image of the view from the bumper of the rear area of the vehicle. The image on the rear view monitor system adjusted.
Page 284 4-5. Using the driving support systems ■ Rear view monitor system camera The camera for the rear view monitor system located above the license plate. ● Using the camera If the camera lens becomes dirty, it cannot transmit a clear image.
Page 285 4-5. Using the driving support systems ● When the ground behind the vehicle slopes up sharply The distance guide lines will appear to be closer to the vehicle than the actual dis- tance. Because this, objects will appear to be far- ther away than they actually are.
Page 286 4-5. Using the driving support systems ● When any part of the vehicle sags When any part of the vehicle sags due to the number of passengers or the distribu- tion of the load, there is a margin of error between the fixation guide lines on the screen and the actual dis- A margin of error...
Page 287 4-5. Using the driving support systems ● Distance guide lines Visually check the surround- ings and the area behind the vehicle. On the screen, it appears that a truck is park- ing at point . However, in reality if you back up to point , you will hit the truck.
Page 288 If you notice any of the following symptoms, refer to the likely cause and the solution, and re-check. If the symptom is not resolved by the solution, have the vehicle inspected by your Toyota dealer. Likely cause Solution  The image is difficult to see •...
Page 289  The fixed guide lines are very far out of alignment The camera position is out of align- Have the vehicle inspected by your ment. Toyota dealer. • The vehicle is tilted (there is a If this happens due to these causes, heavy load on the vehicle, tire it does not indicate a malfunction.
Page 290 Doing so may result in the camera malfunc- tioning. Do not expose the camera to strong impact as this could cause a malfunc- ● tion. If this happens, have the vehicle inspected by your Toyota dealer as soon as possible. SIENNA_OM_01999-08001_(U)
Page 291: Driving Assist Systems
4-5. Using the driving support systems Driving assist systems To help enhance driving safety and performance, the following systems operate automatically in response to various driving situations. Be aware, however, that these systems are supple- mentary and should not be relied upon too heavily when operat- ing the vehicle.
Page 292 4-5. Using the driving support systems ◆ VDIM (Vehicle Dynamics Integrated Management) (if equipped) Provides integrated control of the ABS, brake assist, TRAC, VSC, hill-start assist control, and EPS systems Helps to maintain vehicle stability when swerving on slippery road surfaces by controlling the brakes and engine output ◆...
Page 293 TRAC has been disabled even if has not been pressed TRAC and hill-start assist control (if equipped) cannot be operated. Contact your Toyota dealer. ■ Sounds and vibrations caused by ABS, brake assist, TRAC, VSC and hill-start assist control (if equipped) systems A sound may be heard from the engine compartment when the brake pedal ●...
Page 294 4-5. Using the driving support systems ■ Reduced effectiveness of the EPS system The effectiveness of the EPS system is reduced to prevent the system from overheating when there is frequent steering input over an extended period of time. The steering wheel may feel heavy as a result. Should this occur, refrain from excessive steering input or stop the vehicle and turn the engine off.
Page 295 The ABS, TRAC and VSC systems will not function correctly if different tires are installed on the vehicle. Contact your Toyota dealer for further information when replacing tires or wheels. ■ Handling of tires and suspension...
Page 296: Pcs (Pre-Collision System)
4-5. Using the driving support systems  PCS (Pre-Collision System) When the radar sensor detects possibility of a frontal collision, the pre-collision system such as the brakes and seat belts are automatically engaged to lessen impact as well as vehicle dam- age.
Page 297 4-5. Using the driving support systems ◆ Pre-collision braking When there is a high possibility of a frontal collision, the system warns the driver using a warning light, warning display and buzzer. If the system determines that a collision is unavoidable, the brakes are automatically applied to reduce the collision speed.
Page 298 4-5. Using the driving support systems ■ The pre-collision system is operational when Pre-collision seat belts (type A): ● • Vehicle speed is greater than about 4 mph (5 km/h). • The speed at which your vehicle is approaching the obstacle or the vehi- cle running ahead of you is greater than about 19 mph (30 km/h).
Page 299 4-5. Using the driving support systems ■ Conditions that may trigger the system even if there is no possibility of a collision When there is an object by the roadside at the entrance to a curve ● When passing an oncoming vehicle on a curve ●...
Page 300 4-5. Using the driving support systems ■ Automatic cancelation of the pre-collision system When a malfunction occurs due to sensor contamination, etc. that results in the sensors being unable to detect obstacles, the pre-collision system will be automatically disabled. In this case, the system will not activate even if there is a collision possibility.
Page 301 4-5. Using the driving support systems WARNING ■ Limitations of the pre-collision system Do not overly rely on the pre-collision system. Always drive safely, taking care to observe your surroundings and checking for any obstacles or other road hazards. Failure to do so may cause an accident resulting in death or serious injury.
Page 302 4-5. Using the driving support systems WARNING ■ When the sensor may not be correctly detecting the vehicle ahead Apply the brakes as necessary in any of the following situations. When water or snow thrown up by the surrounding vehicles hinders the ●...
Page 303: Bsm (Blind Spot Monitor)
4-5. Using the driving support systems  BSM (Blind Spot Monitor) Summary of the Blind Spot Monitor The Blind Spot Monitor is a system that has 2 functions: ● The Blind Spot Monitor function Assists the driver in making the decision when changing lanes ●...
Page 304 4-5. Using the driving support systems Rear Cross Traffic Alert buzzer (Rear Cross Traffic Alert function only) When a vehicle approaching from the right or left rear of the vehicle is detected, a buzzer sounds from behind the rear seat. ■...
Page 305 If the sensor moves even slightly off position, the system may mal- function and vehicles that enter the detection area may not be detected. If the sensor or surrounding area is subject to a strong impact, always have the area inspected by your Toyota dealer. Do not disassemble the sensor. ●...
Page 306 4-5. Using the driving support systems The Blind Spot Monitor function The Blind Spot Monitor function uses radar sensors to detect vehicles that are traveling in an adjacent lane in the area that is not reflected in the outside rear view mirror (the blind spot), and advises the driver of the vehicles existence via the outside rear view mirror indicator.
Page 307 4-5. Using the driving support systems ■ The Blind Spot Monitor function is operational when The BSM main switch is set to on ● Vehicle speed is greater than approximately 10 mph (16 km/h). ● ■ The Blind Spot Monitor function will detect a vehicle when A vehicle in an adjacent lane overtakes your vehicle.
Page 308 4-5. Using the driving support systems Instances of the Blind Spot Monitor function unnecessarily detecting a vehi- ● cle and/or object may increase under the following conditions: • When there is only a short distance between your vehicle and a guardrail, wall etc.
Page 309 4-5. Using the driving support systems The Rear Cross Traffic Alert function detection areas The areas that vehicles can be detected in are outlined below. To give the driver a more consistent time to react, the buzzer can alert for faster vehicles from farther away. Example: Approximate Approaching vehicle...
Page 310 4-5. Using the driving support systems ■ Conditions under which the Rear Cross Traffic Alert function may not function correctly The Rear Cross Traffic Alert function may not detect vehicles correctly in the following conditions: When ice or mud etc. is attached to the rear bumper ●...
Page 311: Driving Tips
4-6. Driving tips Winter driving tips Carry out the necessary preparations and inspections before driving the vehicle in winter. Always drive the vehicle in a man- ner appropriate to the prevailing weather conditions. Preparation for winter ● Use fluids that are appropriate to the prevailing outside tempera- tures.
Page 312 4-6. Driving tips When driving the vehicle Accelerate the vehicle slowly, keep a safe distance between you and the vehicle ahead, and drive at a reduced speed suitable to road con- ditions. When parking the vehicle Park the vehicle and move the shift lever to P without setting the park- ing brake.
Page 313 NOTICE ■ Repairing or replacing snow tires Request repairs or replacement of snow tires from Toyota dealers or legiti- mate tire retailers. This is because the removal and attachment of snow tires affects the opera- tion of the tire pressure warning valves and transmitters.
Page 314: Audio System
Audio system 5-1. Basic Operations Audio system types... 316 Audio system ....317 Steering wheel audio switches ......320 AUX Port/USB Port ... 322 Basic audio operations..323 5-2. Setup Setup menu....... 325 General settings....326 Audio settings ....328 Display settings....
Page 315 Audio system ® 5-5. Playing an audio CD and 5-8. Bluetooth Audio ® Listening to Bluetooth MP3/WMA/AAC discs CD player operation ..337 Audio....... 364 ® 5-6. Using an external device 5-9. Bluetooth phone ® Listening to an iPod ..343 Using a Bluetooth Phone ......
Page 316: Basic Operations
5-1. Basic Operations Audio system types Entune Audio  P. 317 Entune Audio Plus/Entune Premium Audio with Navigation  Owners of models equipped with a navigation system should refer to “NAVIGATION MULTIMEDIA SYSTEM OWNER’S MANUAL”. ■ Using cellular phones Interference may be heard through the audio system’s speakers if a cellular phone is being used inside or close to the vehicle while the audio system is operating.
Page 317: Audio System
5-1. Basic Operations  Audio system Operations such as listening to audio, using the hands-free phone, confirming vehicle information and changing audio sys- tem settings are started by using the following buttons. Audio system operation buttons “AUDIO” button Display the “Select Audio Source” screen or audio top screen. (P.
Page 318 5-1. Basic Operations Operating the touch screen By touching the screen with your finger, you can control the audio sys- tem, etc. ■ Touch Quickly touch and release once. ● Changing and selecting various settings ■ Drag Touch the screen with your finger, and move the screen to the desired position.
Page 319 5-1. Basic Operations ■ When using the touch screen If the screen is cold, the display may be dark, or the system may seem to be ● operating slightly slower than normal. The screen may seem dark and hard to see when viewed through sun- ●...
Page 320: Steering Wheel Audio Switches
5-1. Basic Operations Steering wheel audio switches Some audio features can be controlled using the switches on the steering wheel. Operation may differ depending on the type of audio system or navigation system. For details, refer to the manual provided with the audio system or navigation system.
Page 321 5-1. Basic Operations WARNING ■ To reduce the risk of an accident Exercise care when operating the audio switches on the steering wheel. SIENNA_OM_01999-08001_(U)
Page 322: Aux Port/Usb Port
5-1. Basic Operations AUX Port/USB Port Connect an iPod, USB memory device or portable audio player to the AUX port/USB port as indicated below. Select “iPod”, “USB” or “AUX” on the audio source selection screen and the device can be operated via audio system. Connecting using the AUX port/USB port ■...
Page 323: Basic Audio Operations
5-1. Basic Operations Basic audio operations Basic audio operations and functions common to each mode are explained in this section. Operating the audio system Press this button to eject a disc Insert a disc into the disc slot Press to pause or resume playing music. Press the “<”...
Page 324 5-1. Basic Operations Random playback Select to change on/off. Repeat play Select to change on/off. ■ Using cellular phones Interference may be heard through the audio system’s speakers if a cellular phone is being used inside or close to the vehicle while the audio system is operating.
Page 325: Setup
5-2. Setup Setup menu You can adjust the audio system to your desired settings. Display “Setup” screen Press the “SETUP” button to display the “Setup” screen. Select to adjust the settings for operation sounds, screen ani- mation, etc. (P. 326) Select to set the voice settings.
Page 326: General Settings
The animation effect for the screen can be set to on/off. Select to delete personal data (P. 327) Select to update program versions. For details, contact your Toyota dealer. Select to display the software information. Notices related to third party software used in this product are enlisted. (This includes instructions for obtaining such software, where applicable.)
Page 327 5-2. Setup Clock setting Display the “General Settings” screen. (P. 326) Operations up to this point can also be performed by select the clock dis- play at the top of most screens. Select the items to be set. Manual clock setting Set minutes to 00 The 24-hour time format can be to on/off.
Page 328: Audio Settings
5-2. Setup Audio settings Settings are available for adjusting the radio operation, cover art, etc. Screen for audio settings Press the “SETUP” button. Select “Audio” on the “Setup” screen. Number of Radio Presets Select the number of radio preset stations. Display Cover Art on/off Automatic Sound Levelizer (P.
Page 329: Display Settings
5-2. Setup Display settings Settings are available for adjusting the contrast and brightness of the screen. Screen for display settings Press the “SETUP” button. Select “Display” on the “Setup” screen. Adjust screen contrast/bright- ness Adjust screen contrast/bright- ness of the rear view monitor camera Changes to day mode.
Page 330: Voice Settings
5-2. Setup Voice settings This screen is used for guidance for voice command systems setting. Adjust the voice guidance vol- ume setting. voice recognition prompts “High”, “Low” or “Off”. Set the train voice recognition. Set the voice prompt interrupt on/off. Voice recognition tutorial ■...
Page 331: 5-3. Using The Multimedia System
5-3. Using the Multimedia system Selecting the audio source Switching between audio sources such as radio and CD are explained in this section. Changing audio source Press the “AUDIO” button to display the audio source selection screen. If the audio source selection screen is not displayed, press the “AUDIO” button again.
Page 332: List Screen Operation
5-3. Using the Multimedia system List screen operation When a list screen is displayed, use the appropriate buttons to scroll through the list. How to scroll : Select to scroll to the next or previous page. : If appears to the right of titles, the complete titles are too long for the display.
Page 333 5-3. Using the Multimedia system Selecting, fast-forwarding and reversing tracks/files/songs ■ Selecting a track/file/song Press the “” or “” button on “SEEK•TRACK” or turn the “TUNE•SCROLL” knob to select the desired track/file/song number. To fast-forward or reverse, press and hold the “” or “” button on “SEEK•TRACK”.
Page 334: Optimal Use Of The Audio System
5-3. Using the Multimedia system Optimal use of the audio system On the “Sound Settings” screen, sound quality (Treble/Mid/ Bass), volume balance can be adjusted. How to adjust the sound settings and sound quality Select “-” or “+” to adjust 1 2 3 the treble, mid or bass to a level between -5 and 5.
Page 335: Using The Radio
5-4. Using the radio Radio operation Select “AM” or “FM” on the audio source selection screen to begin listening to the radio. Audio control screen Pressing the “AUDIO” button displays the audio control screen from any screens of the selected source. Audio source selection screen appears Preset stations...
Page 336 5-4. Using the radio Setting station presets Search for desired stations by turning the “TUNE•SCROLL” knob or pressing the “” or “” button on “SEEK•TRACK”. Select “(add new)”. To change the preset station to a different one, select and hold the preset station.
Page 337: Cd Player Operation
5-5. Playing an audio CD and MP3/WMA/AAC discs CD player operation Insert disc or select “CD” on the audio source selection screen with a disc inserted to begin listening to a CD. Audio control screen Pressing the “AUDIO” button displays the audio control screen from any screens of the selected source.
Page 338 ■ Error messages If an error message is displayed, refer to the following table and take the appropriate measures. If the problem is not rectified, take the vehicle to your Toyota dealer. Message Cause Correction procedures • The disc is dirty or •...
Page 339 5-5. Playing an audio CD and MP3/WMA/AAC discs ■ MP3, WMA and AAC files MP3 (MPEG Audio LAYER3) is a standard audio compression format. Files can be compressed to approximately 1/10 of their original size by using MP3 compression. WMA (Windows Media Audio) is a Microsoft audio compression format. This format compresses audio data to a size smaller than that of the MP3 for- mat.
Page 340 5-5. Playing an audio CD and MP3/WMA/AAC discs AAC file compatibility ● • Compatible standards MPEG4/AAC-LC • Compatible sampling frequencies 11.025/12/16/22.05/24/32/44.1/48 (kHz) • Compatible bit rates 16-320 (kbps) Compatible channel modes: 1ch and 2ch Compatible media ● Media that can be used for MP3, WMA and AAC playback are CD-Rs and CD-RWs.
Page 341 5-5. Playing an audio CD and MP3/WMA/AAC discs ID3, WMA and AAC tags ● ID3 tags can be added to MP3 files, making it possible to record the track title, artist name, etc. The system is compatible with ID3 Ver. 1.0, 1.1, and Ver. 2.2, 2.3 ID3 tags. (The number of characters is based on ID3 Ver.
Page 342 5-5. Playing an audio CD and MP3/WMA/AAC discs NOTICE ■ Discs and adapters that cannot be used Do not use the following types of CDs. Also, do not use 3 in. (8 cm) CD adapters, DualDiscs or printable discs. Doing so may damage the CD player and/or the CD insert/eject function. Discs that have a diameter that is not 4.7 in.
Page 343: Using An External Device
5-6. Using an external device Listening to an iPod Connecting an iPod enables you to enjoy music from the vehicle speakers. Select “iPod” on the audio source selection screen. When the iPod connected to the system includes iPod video, the system can only output the sound by selecting the browse screen.
Page 344 5-6. Using an external device ■ About iPod “Made for iPod” and “Made for iPhone” mean that an electronic accessory ● has been designed to connect specifically to iPod or iPhone, respectively, and has been certified by the developer to meet Apple performance stan- dards.
Page 345 Owner’s Manual. ■ Error messages If an error message is displayed, refer to the following table and take the appropriate measures. If the problem is not rectified, take the vehicle to your Toyota dealer. Message Cause/Correction procedures “Connection error. Please consult your Owner’s...
Page 346 5-6. Using an external device ■ Compatible models ® ® ® ® ® The following iPod , iPod nano , iPod classic , iPod touch and iPhone devices can be used with this system. Made for ● • iPod touch (5th generation) •...
Page 347: Listening To A Usb Memory Device
5-6. Using an external device Listening to a USB memory device Connecting a USB memory device enables you to enjoy music from the vehicle speakers. Touch “USB” on the audio source selection screen. Connecting a USB memory device P. 322 Audio control screen Pressing the “AUDIO”...
Page 348 Error messages for USB memory If an error message is displayed, refer to the following table and take the appropriate measures. If the problem is not rectified, take the vehicle to your Toyota dealer. Message Cause/Correction procedures “Connection error. Please...
Page 349 5-6. Using an external device MP3, WMA and AAC files ● MP3 (MPEG Audio LAYER 3) is a standard audio compression format. Files can be compressed to approximately 1/10 of their original size using MP3 compression. WMA (Windows Media Audio) is a Microsoft audio compression format. This format compresses audio data to a size smaller than that of the MP3 format.
Page 350 5-6. Using an external device ID3, WMA and AAC tags ● ID3 tags can be added to MP3 files, making it possible to record the track title, artist name, etc. The system is compatible with ID3 Ver. 1.0, 1.1, and Ver. 2.2, 2.3, 2.4 ID3 tags.
Page 351 5-6. Using an external device NOTICE ■ To prevent damage to the USB memory device or its terminals Do not leave the USB memory device in the vehicle. The temperature ● inside the vehicle may become high. Do not push down on or apply unnecessary pressure to the USB memory ●...
Page 352: Using The Aux Port
5-6. Using an external device Using the AUX port To use the AUX port, connect a portable player, press the “AUDIO” button, then select “AUX” to display the audio control screen. Connecting a portable audio player P. 322 ■ Operating portable audio players connected to the audio system The volume can be adjusted using the vehicle’s audio controls.
Page 353: Connecting Bluetooth
® 5-7. Connecting Bluetooth Preparations to use wireless communication ® The following can be performed using Bluetooth wireless com- munication: ■ A portable audio player can be operated and listened to via audio system ■ Hands-free phone calls can be made via a cellular phone In order to use wireless communication, register and connect a ®...
Page 354 ® 5-7. Connecting Bluetooth Device registration/connection flow ® 1. Register the Bluetooth device to be used with audio sys- tem (P. 356, 357, 358) ® 2. Connect the Bluetooth device to be used (P. 360) To be used for audio To be used for hands-free phone ®...
Page 355 ® 5-7. Connecting Bluetooth Registering and connecting from the “Bluetooth* Setup” screen To display the screen shown below, press the “SETUP” button and select “Bluetooth ” on the “Setup” screen. Select to connect the device to be used with audio system. (P.
Page 356: Registering A Bluetooth ® Audio Player For The First Time
® 5-7. Connecting Bluetooth ® Registering a Bluetooth audio player for the first time ® To use the Bluetooth Audio, it is necessary to register an audio player with the system. Once the player has been registered, it is possible to use the ®...
Page 357: Registering A Bluetooth ® Phone For The First Time
® 5-7. Connecting Bluetooth ® Registering a Bluetooth phone for the first time To use the hands-free system, it is necessary to register a ® Bluetooth phone with the system. Once the phone has been registered, it is possible to use the hands-free system.
Page 358: Registering A Bluetooth ® Device
® 5-7. Connecting Bluetooth ® Registering a Bluetooth device ® Bluetooth compatible phones (HFP) and portable audio players (AVP) can be registered simultaneously. You can register up to 5 ® Bluetooth devices. ® How to register a Bluetooth device Display the “Bluetooth Setup”...
Page 359 ® 5-7. Connecting Bluetooth Check that this screen is dis- played when registration is complete. Select “OK” when connection status changes from “Connecting...” to “Connected”. If an error message is displayed, follow the guidance on the screen to try again. Registration can be performed from screens other than the “Bluetooth* Setup”...
Page 360: Connecting A Bluetooth ® Device
® 5-7. Connecting Bluetooth ® Connecting a Bluetooth device ® Up to 5 Bluetooth devices (Phones [HFP] and audio players [AVP]) can be registered. ® If more than 1 Bluetooth device has been registered, select which device to connect to. Press the “SETUP”...
Page 361 ® 5-7. Connecting Bluetooth Manual connection When auto connection has failed or “Bluetooth Power” is turned off, ® you must connect the Bluetooth device manually. : Bluetooth is a registered trademark of Bluetooth SIG, Inc. ® Follow the steps in “Connecting a Bluetooth device”...
Page 362: Displaying A Bluetooth ® Device Details
® 5-7. Connecting Bluetooth ® Displaying a Bluetooth device details You can confirm and change the registered device details. ® Bluetooth device registration status Display the “Bluetooth Setup” screen. (P. 355) : Bluetooth is a registered trademark of Bluetooth SIG, Inc. Select the device.
Page 363: Detailed Bluetooth ® System Settings
® 5-7. Connecting Bluetooth ® Detailed Bluetooth system settings ® You can confirm and change the detailed Bluetooth settings. ® How to check and change detailed Bluetooth settings Display the “Bluetooth Setup” screen. (P. 355) Select “System Settings”. The following screen is displayed: ®...
Page 364 ® 5-8. Bluetooth Audio ® Listening to Bluetooth Audio ® The Bluetooth audio system enables the user to enjoy music played on a portable player from the vehicle speakers via wire- less communication. ® When a Bluetooth device cannot be connected, check the connec- tion status on the “Bluetooth Audio”...
Page 365: Bluetooth ® Audio
® 5-8. Bluetooth Audio ® Playing Bluetooth audio Select to Play/Pause. For details on “Bluetooth Audio” screen operation methods, refer to Basic Audio Operations. (P. 323) For details on how to select a track or album, refer to selecting, fast- forwarding and reversing tracks/files/songs.
Page 366: Bluetooth ® Phone Using A Bluetooth ® Phone
® 5-9. Bluetooth phone ® Using a Bluetooth Phone The hands-free system is a function that allows you to use your cellular phone without touching it. ® ® This system supports Bluetooth . Bluetooth is a wireless data system that allows the cellular phone to wirelessly connect to the hands-free system and make/receive calls.
Page 367 ® 5-9. Bluetooth phone ◆ Telephone switch (P. 379) ◆ Microphone The vehicle’s built in micro- phone is used when talking on the phone. The person you are speaking to can be heard from the front speakers. To use the hands-free system, must register your...
Page 368: Making A Call
® 5-9. Bluetooth phone Making a call ® Once a Bluetooth phone is registered, you can make a call using the following procedure: Dialing Display the phone screen. (P. 366) Select the “Dial Pad” tab and enter a phone number. To delete the input phone number, select For the first digit, you can enter “+”...
Page 369 ® 5-9. Bluetooth phone Press the switch on the steering wheel. If the phonebook is empty, a message will be displayed. ® For a PBAP compatible Bluetooth phone and “Automatic Transfer”  is off Select the desired item. Select to transfer new con- tacts from a cellular phone, select “Always”...
Page 370 ® 5-9. Bluetooth phone Calling using favorites list You can make a call using numbers registered in the contact. Display the phone screen. (P. 366) Select “Favorites” tab. Select the desired number to make a call. Dialing from call history You can make a call using the call history, which has the 3 functions below.
Page 371: Receiving A Call
® 5-9. Bluetooth phone Receiving a call When a call is received, the following screen is displayed together with a sound. To answer the phone Press the switch on the steer- ing wheel or select To refuse a call Press the switch on the steering wheel or select To adjust the incoming call volume Turn the “PWR•VOL”...
Page 372: Speaking On The Phone
® 5-9. Bluetooth phone Speaking on the phone The following screen is displayed when speaking on the phone. To adjust the call volume Select “-” or “+”. You can also adjust the volume using the steering switches or the volume knob. To prevent the other party from hearing your voice Select “Mute”.
Page 373 ® 5-9. Bluetooth phone ■ Release Tones A continuous tone signal is a character string that consists of numbers and ● the characters p or w. (e.g.056133w0123p#1) When the “p” pause tone is used, the tone data up until the next pause tone ●...
Page 374 ® 5-9. Bluetooth phone To transfer a call Select “Handset Mode” to on from a hands-free call to a cellular phone call. Select “Handset Mode” to off from a cellular phone call to a hands-free call. Transmit volume setting Select “Transmit Volume”. Select the desired level for the transmit volume.
Page 375: Bluetooth ® Phone Message Function
® 5-9. Bluetooth phone ® Bluetooth phone message function Received messages can be forwarded from the connected ® Bluetooth phone, enabling checking and replying using the audio system. ® Depending on the type of Bluetooth phone connected, received messages may not be transferred to the message inbox. If the phone does not support the message function, this func- tion cannot be used.
Page 376 ® 5-9. Bluetooth phone ■ Receiving a message Depending on the cellular phone used for receiving messages, or its regis- ● tration status with the audio system, some information may not be dis- played. The pop up screen is separately available for incoming e-mail and SMS/ ●...
Page 377 ® 5-9. Bluetooth phone Checking the messages Display the message inbox screen. (P. 375) Select the desired message from the list. Check that the message is displayed. E-mails: Select “Mark Unread” or “Mark Read” to mark mail unread or read on the message inbox screen.
Page 378 ® 5-9. Bluetooth phone Replying to a message Display the message inbox screen. (P. 375) Select the desired message from the list. Select “Quick Message”. Select the desired message. Select “Send”. If an error message is displayed, follow the guidance on the screen to try again.
Page 379: Using The Steering Wheel Switches
® 5-9. Bluetooth phone Using the steering wheel switches The steering wheel switches can be used to operate a connected cellular phone. Operating a telephone using the steering wheel switches Volume switch • Increase/Decrease the vol- • Press and hold: Continuously increase/ decrease the volume...
Page 380: Bluetooth ® Phone Settings
® 5-9. Bluetooth phone ® Bluetooth phone settings You can adjust the hands-free system to your desired settings. “Phone/Message Settings” screen To display the screen shown below, press the “SETUP” button, and select “Phone” on the “Setup” screen. Set the phone connection (P.
Page 381: Contact/Call History Settings
® 5-9. Bluetooth phone Contact/Call History Settings ® The contact can be transferred from a Bluetooth phone to the sys- tem. The contact also can be added, edited and deleted. The call history can be deleted and contact and favorites can be changed.
Page 382 ® 5-9. Bluetooth phone Update contacts from phone Operation methods differ between PBAP compatible and PBAP ® incompatible but OPP compatible Bluetooth phones. If your cellular phone is neither PBAP nor OPP compatible, the con- tacts cannot be transferred. ® ■...
Page 383 ® 5-9. Bluetooth phone ■ Updating the contacts in a different way (From the “Call History” screen) ® For PBAP compatible Bluetooth phones, this function is available when “Automatic Transfer” is set to off. (P. 381) Display the phone screen. (P. 366) Select the “Call History”...
Page 384 ® 5-9. Bluetooth phone Editing the contact data ® For PBAP compatible Bluetooth phones, this function is available when “Automatic Transfer” is set to off. (P. 381) Select “Edit Contact”. Select the desired contact. Select corresponding to the desired name or number. For editing the name ...
Page 385 ® 5-9. Bluetooth phone Deleting the contact data ® For PBAP compatible Bluetooth phones, this function is available when “Automatic Transfer” is set to off. (P. 381) Select “Delete Contacts”. Select the desired contact and select “Delete”. Select “Yes” when the confirmation screen appears. ■...
Page 386 ® 5-9. Bluetooth phone When 15 contacts have already been registered to the favorites list  When 15 contacts have already been registered to the favorites list, a registered contact needs to be replaced. Select “Yes” when the confirmation screen appears to replace a contact.
Page 387 ® 5-9. Bluetooth phone ■ Deleting the contacts in the favorites list Select “Remove Favorite”. Select the desired contacts and select “Remove”. Select “Yes” when the confirmation screen appears. Check that a confirmation screen is displayed when the opera- tion is complete. Deleting contacts in the favorites list in a different way (from the ...
Page 388 ® 5-9. Bluetooth phone Message Settings Display the “Phone/Message Settings” screen. (P. 380) Select “Messaging Settings”. Select the desired item to be set. automatic message transfer on/off. automatic message readout on/off. Set the SMS/MMS notifica- tion popup on/off. Set the e-mail notification popup on/off.
Page 389 ® 5-9. Bluetooth phone ■ Displaying the “Messaging Settings” screen in a different way Display the phone screen. (P. 366) Select Select “Settings”. Select “Message Settings”. Phone Display Settings Display the “Phone/Message Settings” screen. (P. 380) Select “Phone Display Settings”. Select the desired item to be set.
Page 390: What To Do If
 For a list of specific devices which operation has been confirmed on this system, check with your Toyota dealer or the following web- site: http://www.toyota.com/entune/ The Bluetooth version of the connected cellular phone may be older than the specified version.
Page 391 ® 5-9. Bluetooth phone When registering/connecting a cellular phone  A cellular phone cannot be registered. An incorrect passcode was entered on the cellular phone.  Enter the correct passcode on the cellular phone. The registration operation has not been completed on the cellular phone side.
Page 392  For a list of specific devices which operation has been confirmed on this system, check with your Toyota dealer or the following web- site: http://www.toyota.com/entune/ Automatic phonebook transfer function on this system is set to off.
Page 393 ® 5-9. Bluetooth phone In other situations  Even though all conceivable measures have been taken, the symptom sta- tus does not change. The cellular phone is not close enough to this system.  Bring the cellular phone closer to this system. The cellular phone is the most likely cause of the symptom.
Page 394: Bluetooth
® 5-10. Bluetooth ® Bluetooth ■ ® When using the Bluetooth audio system In the following conditions, the system may not function. ● • If the portable audio player is turned off • If the portable audio player is not connected •...
Page 395 ® 5-10. Bluetooth ■ ® Bluetooth antenna The antenna is built into the display. ® If the Bluetooth device is behind the seat or in the glove box or console box, or is touching or covered by metal objects, the connection status may deterio- rate.
Page 396 ® 5-10. Bluetooth ■ Compatible models ® The Bluetooth audio system supports portable audio players with the follow- ing specifications ® Bluetooth specifications: ● Ver. 2.0, or higher (Recommended: Ver. 3.0+EDR or higher) Profiles: ● • A2DP (Advanced Audio Distribution Profile) Ver. 1.0, or higher (Recommended: Ver.
Page 397 ® 5-10. Bluetooth  ■ Certifications for the Bluetooth (caution) For vehicles sold in the U.S.A.  FCC ID: AJDK068 NOTE: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interfer- ence that may cause undesired operation.
Page 398 ® 5-10. Bluetooth CAUTION: Radio Frequency Radiation Exposure This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE).
Page 399 ® 5-10. Bluetooth ■ Reconnecting the portable audio player If the portable audio player is disconnected due to poor reception, the system automatically reconnects the portable audio player. If you have switched off the portable audio player yourself, follow the instruc- tions below to reconnect: Select the portable audio player again ●...
Page 400: Using The Voice
5-11. Using the voice command system Voice command system The voice command system enables the hands-free system to be operated using voice commands. Using the voice command system Press the talk switch. To cancel the voice command sys- tem, press and hold the talk switch. After a beep sounds, say the desired command.
Page 401 5-11. Using the voice command system Casual speech recognization Due to natural language speech recognition technology, this system enables recognition of a command when spoken naturally. However, the system cannot recognize every variation of each command. In some situations, it is possible to omit the command for the proce- dure and directly state the desired operation.
Page 402 5-11. Using the voice command system Command list Some recognizable voice commands and their actions are shown below as examples. Basic  Command Action Prompts voice guidance to offer examples of com- “Help” mands or operation methods “Go Back” Returns to the previous screen Phone ...
Page 403: Interior Features
Interior features 6-1. Using the air conditioning 6-3. Using the storage features List of storage features ..422 system and defogger Front automatic air • Glove boxes....423 conditioning system ..404 • Console box....424 • Cup holders ....426 Rear automatic air •...
Page 404: Front Automatic Air Conditioning System
6-1. Using the air conditioning system and defogger Front automatic air conditioning system Air outlets and fan speed are automatically adjusted according to the temperature setting. Air conditioning controls ■ Adjusting the temperature setting Turn the “TEMP” dial clockwise to increase the temperature and counterclockwise to decrease the temperature.
Page 405 6-1. Using the air conditioning system and defogger ■ The “SYNC” button The air conditioning system switches between individual (indica- tor(s) off) and simultaneous (indicators on) modes. When the air conditioning system is in simultaneous mode, the pas- senger and/or rear side temperature will be synchronized with driver side’s.
Page 406 6-1. Using the air conditioning system and defogger ■ Adjusting the fan speed setting Press “” on to increase the fan speed and “” to decrease the fan speed. Press to turn the fan off. ■ Change the airflow mode To change the air outlets, press the “MODE”...
Page 407 6-1. Using the air conditioning system and defogger Using the automatic mode Press the “AUTO” button (“AUTO” appears on the display). Adjust the temperature setting. To stop the operation, press ■ Automatic mode indicator If the fan speed setting or air flow modes are operated, the auto- matic mode indicator goes off.
Page 408 6-1. Using the air conditioning system and defogger Other functions ■ Switching between outside air and recirculated air modes Press The mode switches between outside air mode ( appears on the display) and recirculated air mode ( appears on the display) each time the button is pressed.
Page 409 6-1. Using the air conditioning system and defogger Air outlets ■ Location of air outlets The air outlets and air volume changes according selected air flow mode. ■ Adjusting the position of and opening and closing the air out- lets Center outlets Right and left side outlets ...
Page 410 6-1. Using the air conditioning system and defogger ■ Using automatic mode Fan speed is adjusted automatically according to the temperature setting and the ambient conditions. Therefore, the fan may stop for a while until warm or cool air is ready to flow immediately after the “AUTO”...
Page 411 Press the “A/C” button and turn off the air conditioning system before turning it on once more. There may be a problem in the air conditioning system if “A/C ON” continues to flash. Turn the air conditioning system off and have it inspected by your Toyota dealer. ■ Ventilation and air conditioning odors To let fresh air in, set the air conditioning system to the outside air mode.
Page 412 6-1. Using the air conditioning system and defogger WARNING ■ To prevent the windshield from fogging up Do not use during cool air operation in extremely humid weather. ● The difference between the temperature of the outside air and that of the windshield can cause the outer surface of the windshield to fog up, block- ing your vision.
Page 413: Rear Automatic Air Conditioning System
6-1. Using the air conditioning system and defogger Rear automatic air conditioning system Airflow and outlets are automatically adjusted according to the temperature setting. Air conditioning controls ■ Adjusting the temperature setting Press “” on the “TEMP” button to increase the temperature and “” to decrease the temperature.
Page 414 6-1. Using the air conditioning system and defogger ■ Changing the air outlets Press the “MODE” button. The air flow mode switch each time the button is pressed. Air flows to the upper body. Air flows to the upper body and feet.
Page 415 6-1. Using the air conditioning system and defogger ■ Adjusting the position of the air outlets Direct air flow to the front or rear, up or down. ■ Temperature display The temperature display on the multi-information display can be changed. (P.
Page 416: Heated Steering Wheel/Seat Heaters
6-1. Using the air conditioning system and defogger   Heated steering wheel /seat heaters Heated steering wheel and seat heaters heat the side grips of the steering wheel and seats, respectively. WARNING Care should be taken to prevent injury if anyone in the following categories ●...
Page 417: Heated Steering Wheel
6-1. Using the air conditioning system and defogger Heated steering wheel Turns the heated steering wheel on/off The indicator light comes on when the heated steering wheel is oper- ating. The heated steering wheel can be used when the engine switch is in IGNI- ●...
Page 418: Seat Heaters
6-1. Using the air conditioning system and defogger Seat heaters For driver’s seat For front passenger’s seat The indicator light comes on. Adjusts the seat temperature The further you move the dial upward, the warmer the seat becomes. The seat heaters can be used when the engine switch is in the “ON” position ●...
Page 419: Using The Interior Lights
6-2. Using the interior lights Interior lights list Rear personal/interior lights (P. 420) Rear ceiling lights (if equipped) (P. 421) Front personal/interior lights (P. 420) Engine switch light Front door courtesy lights (if equipped) Outer foot lights (if equipped) SIENNA_OM_01999-08001_(U)
Page 420: Personal/Interior Light Main Switch
6-2. Using the interior lights Personal/interior light main switch Turns the lights on Turns the door position on Turns the lights off Personal/interior lights ■ Front Turns the light on/off ■ Rear Turns the light on/off When the personal/interior light main switch is in the off position, the rear personal lights will not turn on even if the switch is on.
Page 421: Rear Ceiling Lights
6-2. Using the interior lights Rear ceiling lights (if equipped) Turns the lights on/off When the personal/interior light main switch is in the off position, the rear ceiling lights will not turn on even if the switch is on. ■ Adjusting the rear personal/interior lights angle (if equipped) Push the edge of the light lens.
Page 422: 6-3. Using The Storage Features
6-3. Using the storage features List of storage features Auxiliary boxes (P. 430) Bottle holders (P. 428) Cup holders (P. 426) Glove boxes (P. 423) Door pockets (P. 429) Console box (if equipped) (P. 424) WARNING Do not leave glasses, lighters or spray cans in the storage spaces, as this ●...
Page 423: Glove Boxes
6-3. Using the storage features Glove boxes Upper glove box  Push the button. Open the lid. Lower glove box  The lower glove box can be opened by pulling the lever and can be locked and unlocked by using the master key (vehicles without a smart key) or the mechanical key (vehicles with a smart key system).
Page 424: Console Box
6-3. Using the storage features Console box (if equipped) Press the tab. Type A Type B   ■ Sliding the console box (type B) From front  Press the tab and slide the console box. From rear  Pull up the lever and slide the console box.
Page 425 6-3. Using the storage features WARNING ■ Console box adjustment precaution (type B) Do not adjust the position of the console box while the vehicle is moving. ● This may cause the driver to mishandle the vehicle and may lead to an accident that results in death or serious injury.
Page 426: Cup Holders
6-3. Using the storage features Cup holders Front Console box type A   (if equipped) Press in and release the front cup holder. Console box type B Console box type C   (if equipped) (if equipped) Pull the lid down. Second seat (if equipped) Rear ...
Page 427 6-3. Using the storage features ■ Cup holder light (console box type) The cup holder light turns on when the headlight switch is on. WARNING Do not place anything other than cups or beverage cans in the cup holders. Other items may be thrown out of the holders in the event of an accident or sudden braking and cause injury.
Page 428: Bottle Holders
6-3. Using the storage features Bottle holders Front Rear   II63SN007 When storing a bottle, close the cap. ● The bottle may not be stored depending on its size or shape. ● WARNING Do not place anything other than a bottle in the bottle holders. Other items may be thrown out of the holders in the event of an accident or sudden braking and cause injury.
Page 429: Door Pockets
6-3. Using the storage features Door pockets Front Rear   NOTICE Rear: Make sure magazines are not bent or protruding from the sliding door pock- ets. Do not insert anything too big so that the shape of the sliding door pockets is distorted.
Page 430: Auxiliary Boxes
6-3. Using the storage features Auxiliary boxes Type A Type B   Push the lid. Push down the knob. Type C (if equipped) Type D   Type E (if equipped) Type F   Lift the lid. SIENNA_OM_01999-08001_(U)
Page 431 6-3. Using the storage features Type G (if equipped) Type H (if equipped)   Removing the second center seat. (P. 156) Type I (if equipped) Type J (if equipped)   Type K (if equipped)  SIENNA_OM_01999-08001_(U)
Page 432 6-3. Using the storage features ■ Coin holder (type B) Nickels, quarters and dimes can be stored separately. WARNING ■ Maximum storage weight (type A) Do not store items heavier than 0.4 lb. (200 g). Doing so may cause the auxiliary box to open and the items inside may fall out, resulting in an accident.
Page 433: Luggage Compartment Features
6-3. Using the storage features Luggage compartment features Cargo hooks Raise the hook to use. The cargo hooks are provided for securing loose items. WARNING To avoid injury, always return the cargo hooks to their positions when they are not in use. Cargo net hooks Raise the hook to use.
Page 434 6-3. Using the storage features Storage box (if equipped) Engage the latch buckle. SIENNA_OM_01999-08001_(U)
Page 435: Other Interior Features
6-4. Using the other interior features Other interior features Sun visors To set the visor in the forward position, flip it down. To set the visor in the side posi- tion, flip down, unhook, and swing it to the side. To use the side extender, place the visor in the side position, then slide it backward.
Page 436: Clock
6-4. Using the other interior features Clock Vehicles with an Entune Audio  P. 327 Vehicles with an Entune Audio  Plus or Entune Premium Audio with Navigation Refer to the “NAVIGATION AND MULTIMEDIA SYSTEM OWNER’S MANUAL”. Conversation mirror Push the lid and allow the lid to open.
Page 437: Power Outlets
6-4. Using the other interior features Power outlets The power outlet can be used for the following components: 12 V: Accessories that run on less than 10 A 120 V AC: Accessories that use less than 100 W ■ 12 V Open the cover.
Page 438 6-4. Using the other interior features ■ 120 V AC (if equipped) Open the cover. Power outlet socket console Power outlet socket console   box type A box type B Power outlet socket luggage  compartment SIENNA_OM_01999-08001_(U)
Page 439 6-4. Using the other interior features ■ The power outlet can be used when Vehicles without a smart key system  12 V: The engine switch is in the “ACC” or “ON” position. 120 V AC: The engine switch is in the “ON” position. Vehicles with a smart key system ...
Page 440: Armrests
6-4. Using the other interior features Armrests Pull the armrest down for use. Front seat Second seat (if equipped)   ■ Adjusting the front seat armrests (if equipped) Push the armrest down while pressing the button. NOTICE To prevent damage to the armrest, do not apply too much load on the arm- rest.
Page 441: Assist Grips
6-4. Using the other interior features Assist grips Type A Type B   An assist grip installed on the ceil- An assist grip installed on the pil- ing can be used to support your lar can be used when getting in body while sitting on the seat.
Page 442: Rear Side Sunshades
6-4. Using the other interior features Rear side sunshades (if equipped) Rear door window Rear quarter window   Pull the tab up. Secure the sunshade using the hooks. To retract the sunshade, pull the tab up slightly to unhook the sunshade, and lower the sunshade slowly.
Page 443: Grocery Bag Hooks
6-4. Using the other interior features Grocery bag hooks The hooks are designed to hang things like a grocery bag. Type A (front seatback) Type B (third seatback)   (if equipped) Type C (luggage compartment) Type D (luggage compartment) ...
Page 444: Garage Door Opener
6-4. Using the other interior features  Garage door opener The garage door opener can be programmed to operate garage doors, gates, entry doors, door locks, home lighting systems, security systems, and other devices. ® The garage door opener (HomeLink Universal Transceiver) is manu- ®...
Page 445 6-4. Using the other interior features Press and hold one of the HomeLink buttons and the ® transmitter button. When the HomeLink ® indicator light changes from a slow to a rapid flash, you can release both buttons. ® If the HomeLink indicator light comes on but does not flash, or flashes rapidly for 2 seconds...
Page 446 6-4. Using the other interior features ■ Programming a Rolling Code system (for U.S.A. owners) If your device is Rolling Code equipped, follow the steps under the ® heading “Programming the HomeLink ” before proceeding with the steps listed below. Locate the training button on the ceiling mounted garage door opener motor.
Page 447 6-4. Using the other interior features ■ Programming other devices To program other devices such as home security systems, home door locks or lighting, contact your authorized Toyota dealer for assistance. ■ Reprogramming a button ® The individual HomeLink buttons cannot be erased but can be reprogrammed.
Page 448 6-4. Using the other interior features ■ Before programming Install a new battery in the transmitter. ● The battery side of the transmitter must be pointed away from the ● ® HomeLink button. ■ Certification for the garage door opener For vehicles sold in the U.S.A.
Page 449: Compass
6-4. Using the other interior features  Compass The compass on the inside rear view mirror indicates the direc- tion in which the vehicle is heading. Operation To turn the compass on or off, press the switch. Displays and directions Display Direction North...
Page 450 6-4. Using the other interior features Calibrating the compass Samoa: 5 Guam: 8 Saipan: 8 The direction display deviates from the true direction determined by the earth’s magnetic field. The amount of deviation varies according to the geographic position of the vehicle. If you cross over a map boundary shown in illustration, the compass will deviate.
Page 451 6-4. Using the other interior features ■ Circling calibration When “C” appears on the dis- play, drive the vehicle at 5 mph (8 km/h) or less in a circle until a direction is displayed. If there is not enough space to drive in a circle, drive around the block until the direction is dis- played.
Page 452 6-4. Using the other interior features NOTICE ■ To avoid compass malfunctions Do not place magnets or any metal objects near the inside rear view mirror. Doing this may cause the compass sensor to malfunction. ■ To ensure normal operation of the compass Do not perform circling calibration of the compass in a place where the ●...
Page 453: Safety Connect
Telematics Subscription Service Agreement and its Terms and Conditions, as in effect and amended from time to time, a current copy of which is available at Toyota.com. All use of the Safety Connect service is subject to such then-applicable Terms and Conditions.
Page 454 After you have signed the Telematics Subscription Service Agreement and are enrolled, you can begin receiving services. A variety of subscription terms is available for purchase. Contact your Toyota dealer, call 1-800-331-4331, or push the “SOS” button in your vehicle for further subscription details. SIENNA_OM_01999-08001_(U)
Page 455 ● during Safety Connect. Safety Connect is available beginning Fall 2009 on select Toyota models. ● Contact with the Safety Connect response center is dependent upon the telematics device being in operative condition, cellular connection availabil- ity, and GPS satellite signal reception, which can limit the ability to reach the response center or receive emergency service support.
Page 456 In addition to assisting law enforcement with recovery of a stolen vehicle, Safety-Connect-equipped vehicle location data may, under certain circumstances, be shared with third parties to locate your vehicle. Further information is available at Toyota.com. ■ Emergency Assistance Button (“SOS”) In the event of an emergency on the road, push the “SOS”...
Page 457 6-4. Using the other interior features Safety information for Safety Connect Important! Read this information before using Safety Connect. ■ Exposure to radio frequency signals The Safety Connect system installed in your vehicle is a low-power radio transmitter and receiver. It receives and also sends out radio frequency (RF) signals.
Page 458 6-4. Using the other interior features SIENNA_OM_01999-08001_(U)
Page 459: Maintenance And Care
Maintenance and care 7-1. Maintenance and care 7-2. Maintenance Cleaning and protecting Maintenance the vehicle exterior..460 requirements ....466 Cleaning and protecting General maintenance..469 the vehicle interior... 463 Emission inspection and maintenance (I/M) programs......472 7-3. Do-it-yourself maintenance Do-it-yourself service precautions .....
Page 460: Maintenance And Care Cleaning And Protecting
7-1. Maintenance and care Cleaning and protecting the vehicle exterior Perform the following to protect the vehicle and maintain it in prime condition: ● Working from top to bottom, liberally apply water to the vehicle body, wheel wells and underside of the vehicle to remove any dirt and dust.
Page 461 ■ Precaution regarding the Blind Spot Monitor If the paint of the rear bumper is chipped or scratched, the system may mal- function. If this occurs, consult your Toyota dealer. SIENNA_OM_01999-08001_(U)
Page 462 7-1. Maintenance and care NOTICE ■ To prevent paint deterioration and corrosion on the body and compo- nents (aluminum wheels etc.) Wash the vehicle immediately in the following cases: ● • After driving near the sea coast • After driving on salted roads •...
Page 463: Cleaning And Protecting The Vehicle Interior
● Allow the solution to soak in for a few minutes. Remove the dirt and wipe off the solution with a clean, damp cloth. ■ Caring for leather areas Toyota recommends cleaning the interior of the vehicle at least twice a year to maintain the quality of the vehicle’s interior. ■ Shampooing the carpets There are several commercial foaming-type cleaners available.
Page 464 7-1. Maintenance and care WARNING ■ Water in the vehicle Do not splash or spill liquid in the vehicle. ● Doing so may cause electrical components etc. to malfunction or catch fire. Do not get any of the SRS components or wiring in the vehicle interior wet. ●...
Page 465 7-1. Maintenance and care NOTICE ■ Water on the floor Do not wash the vehicle floor with water. Vehicle systems such as the audio system may be damaged if water comes into contact with electrical components such as the audio system above or under the floor of the vehicle.
Page 466: Maintenance Maintenance Requirements
Toyota recommends the following main- tenance: General maintenance General maintenance should be performed on a daily basis. This can be done by yourself or by a Toyota dealer. Scheduled maintenance Scheduled maintenance should be performed at specified intervals according to the maintenance schedule.
Page 467 ■ Repair and replacement It is recommended that genuine Toyota parts be used for repairs to ensure performance of each system. If non-Toyota parts are used in replacement or if a repair shop other than a Toyota dealer performs repairs, confirm the war- ranty coverage.
Page 468 7-2. Maintenance WARNING ■ If your vehicle is not properly maintained Improper maintenance could result in serious damage to the vehicle and possible serious injury or death. ■ Handling of the battery Engine exhaust, some of its constituents, and a wide variety of automobile ●...
Page 469: General Maintenance
“Owner’s Warranty Information Booklet” or “Owner’s Manual Supplement/Sched- uled Maintenance Guide”. It is recommended that any problem you notice should be brought to the attention of your Toyota dealer or qualified service shop for advice. Engine compartment...
Page 470 7-2. Maintenance Vehicle interior Items Check points • The accelerator pedal should move Accelerator pedal smoothly (without uneven pedal effort or catching). • When parked on a slope with the shift Automatic transaxle “Park” lever in P, is the vehicle securely mechanism stopped? •...
Page 471 7-2. Maintenance Vehicle exterior Items Check points Doors • Do the doors operate smoothly? • Does the engine hood lock system work Engine hood properly? • There should not be any signs of fluid Fluid leaks leakage after the vehicle has been parked.
Page 472: Emission Inspection And Maintenance (I/M) Programs
The OBD system determines that a problem exists somewhere in the emission control system. Your vehicle may not pass the I/M test and may need to be repaired. Contact your Toyota dealer to service the vehicle. Your vehicle may not pass the I/M test in the following situations: ●...
Page 473: Do-It-Yourself Maintenance Do-It-Yourself Service
• Rag or paper towel (P. 483) • Funnel (used only for adding brake fluid) • “Toyota Super Long Life Coolant” or similar high quality ethylene glycol based non-silicate, non- amine, non-nitrite and non-borate coolant with long- life hybrid organic acid technology.
Page 474 7-3. Do-it-yourself maintenance WARNING The engine compartment contains many mechanisms and fluids that may move suddenly, become hot, or become electrically energized. To avoid death or serious injury, observe the following precautions: ■ When working on the engine compartment: Keep hands, clothing and tools away from the moving fan and engine ●...
Page 475: Hood
7-3. Do-it-yourself maintenance Hood Release the lock from the inside of the vehicle to open the hood. Pull the hood lock release lever. The hood will pop up slightly. Pull up the auxiliary catch lever and lift the hood. Hold the hood open by inserting the supporting rod into the slot.
Page 476 7-3. Do-it-yourself maintenance WARNING ■ Pre-driving check Check that the hood is fully closed and locked. If the hood is not locked properly, it may open while the vehicle is in motion and cause an accident, which may result in death or serious injury. ■...
Page 477: Positioning A Floor Jack
7-3. Do-it-yourself maintenance Positioning a floor jack When using a floor jack, follow the instructions in the manual provided with the jack and perform the operation safely. When raising your vehicle with a floor jack, position the jack cor- rectly. Improper placement may damage your vehicle or cause injury.
Page 478: Engine Compartment
7-3. Do-it-yourself maintenance Engine compartment Washer fluid tank (P. 487) Brake fluid reservoir (P. 483) Engine oil filler cap (P. 480) Fuse box (P. 506) Engine oil level dipstick Battery (P. 484) (P. 479) Electric cooling fans Engine coolant reservoir Condenser (P.
Page 479 7-3. Do-it-yourself maintenance Engine oil With the engine at operating temperature and turned off, check the oil level on the dipstick. ■ Checking the engine oil Park the vehicle on level ground. After warming up the engine and turning it off, wait more than 5 minutes for the oil to drain back into the bottom of the engine.
Page 480 7-3. Do-it-yourself maintenance ■ Adding engine oil If the oil level is below or near the low level mark, add engine oil of the same type as that already in the engine. Make sure to check the oil type and prepare the items needed before adding oil.
Page 481 ● not dispose of used oil and filters in household trash, in sewers or onto the ground. Call your Toyota dealer, service station or auto parts store for information concerning recycling or disposal. Do not leave used engine oil within the reach of children.
Page 482 If the coolant level drops within a short time of replenishing Visually check the radiator, hoses, engine coolant reservoir caps, drain cock and water pump. If you cannot find a leak, have your Toyota dealer test the cap and check for leaks in the cooling system. WARNING ■...
Page 483 Radiator and condenser Check the radiator and condenser and clear away any foreign objects. If either of the above parts is extremely dirty or you are not sure of their condition, have your vehicle inspected by your Toyota dealer. WARNING ■...
Page 484 7-3. Do-it-yourself maintenance ■ Brake fluid can absorb moisture from the air Excess moisture in the brake fluid can cause a dangerous loss of braking effi- ciency. Use only newly opened brake fluid. WARNING ■ When filling the reservoir Take care as brake fluid can harm your hands and eyes and damage painted surfaces.
Page 485 Make sure to turn off the engine before disconnecting the battery. Take extra care when connecting the bat- tery if the engine switch mode prior to discharge is unknown. If the system will not start even after multiple attempts, contact your Toyota dealer. ■...
Page 486 7-3. Do-it-yourself maintenance WARNING ■ Chemicals in the battery Batteries contain poisonous and corrosive sulfuric acid and may produce hydrogen gas which is flammable and explosive. To reduce the risk of death or serious injury, take the following precautions while working on or near the battery: Do not cause sparks by touching the battery terminals with tools.
Page 487 7-3. Do-it-yourself maintenance Washer fluid If any washer does not work or the warning message appears on the multi-information display, washer tank may be empty. Add washer fluid. WARNING ■ When refilling washer fluid Do not refill washer fluid when the engine is hot or running, as washer fluid contains alcohol and may catch fire if spilled on the engine etc.
Page 488: Tires
Tire rotation Rotate the tires in the order shown. To equalize tire wear and extend tire life, Toyota recommends that tire rotation is carried out at the same interval as tire inspection. Front SIENNA_OM_01999-08001_(U)
Page 489 ID codes must be registered in the tire pressure warning computer and the tire pressure warning system must be initialized. Have tire pressure warning valve and transmitter ID codes registered by your Toyota dealer. (P. 490) ◆ Initializing the tire pressure warning system When the tire size is changed, the tire pressure warning system must be initialized.
Page 490 The tire pressure warning valve and transmitter is equipped with a unique ID code. When replacing a tire pressure warning valve and transmitter, it is necessary to register the ID code. Have the ID code registered by your Toyota dealer. SIENNA_OM_01999-08001_(U)
Page 491 A tire goes flat repeatedly or cannot be properly repaired due to the size ● or location of a cut or other damage If you are not sure, consult with your Toyota dealer. ■ Replacing tires and wheels If the ID code of the tire pressure warning valve and transmitter is not reg- istered, the tire pressure warning system will not work properly.
Page 492 7-3. Do-it-yourself maintenance ■ Tire types Summer tires ● Summer tires are high-speed performance tires best suited to highway driving under dry conditions. Since summer tires do not have the same traction performance as snow tires, summer tires are inadequate for driving on snow-covered or icy roads.
Page 493 If there is a lot of snow or ice on the vehicle, in particular around the ● wheels or wheel housings. If non-genuine Toyota wheels are used. (Even if you use Toyota wheels, ● the tire pressure warning system may not work properly with some types of tires.)
Page 494 Do not mix tires of different makes, models or tread patterns. ● Also, do not mix tires of remarkably different treadwear. Do not use tire sizes other than those recommended by Toyota. ● Do not mix differently constructed tires (radial, bias-belted or bias-ply ●...
Page 495 When a tire is repaired with liquid sealants, the tire pressure warning valve and transmitter may not operate properly. If a liquid sealant is used, contact your Toyota dealer or other qualified service shop as soon as possible. Make sure to replace the tire pressure warning valve and transmitter when replacing the tire.
Page 496: Tire Inflation Pressure
7-3. Do-it-yourself maintenance Tire inflation pressure Tire inflation pressure The recommended cold tire infla- tion pressure and tire size are dis- played on the tire and loading information label. (P. 600) SIENNA_OM_01999-08001_(U)
Page 497 Driving with incorrect tire inflation pressure may result in the following: Reduced fuel efficiency ● Reduced driving comfort and tire life ● Reduced safety ● Damage to the drive train ● If a tire needs frequent inflating, have it checked by your Toyota dealer. SIENNA_OM_01999-08001_(U)
Page 498 7-3. Do-it-yourself maintenance ■ Instructions for checking tire inflation pressure When checking tire inflation pressure, observe the following: Check only when the tires are cold. ● If your vehicle has been parked for at least 3 hours or has not been driven for more than 1 mile or 1.5 km, you will get an accurate cold tire inflation pressure reading.
Page 499: Wheels
● Used wheels ● Bent wheels that have been straightened Aluminum wheel precautions ● Use only Toyota wheel nuts and wrenches designed for use with your aluminum wheels. ● When rotating, repairing or changing your tires, check that the wheel nuts are still tight after driving 1000 miles (1600 km).
Page 500 Because tire repair or replacement may affect the tire pressure warn- ● ing valves and transmitters, make sure to have tires serviced by your Toyota dealer or other qualified service shop. In addition, make sure to purchase your tire pressure warning valves and transmitters at your Toyota dealer.
Page 501: Air Conditioning Filter
7-3. Do-it-yourself maintenance Air conditioning filter The air conditioning filter must be changed regularly to maintain air conditioning efficiency. Removal method Turn the engine switch to the “LOCK” position (vehicles without a smart key system) or off (vehicles with a smart key system). Open the glove box.
Page 502 7-3. Do-it-yourself maintenance Remove the filter and replace it with a new one. The“UP” marks shown on the fil- ter should be pointing up. ■ Checking interval Replace the air conditioning filter according to the maintenance schedule. In dusty areas or areas with heavy traffic flow, more frequent cleaning or early replacement may be required.
Page 503: Wireless Remote Control/Electronic Key Battery
7-3. Do-it-yourself maintenance Wireless remote control/electronic key battery Replace the battery with a new one if it is depleted. You will need the following items: ● Flathead screwdriver ● Lithium battery CR2032 Replacing the battery Vehicles without a smart key system ...
Page 504 Insert a new battery with the “+” terminal facing up. ■ Use a CR2032 lithium battery Batteries can be purchased at your Toyota dealer, local electrical appliance ● shops or camera stores. Replace only with the same or equivalent type recommended by the manu- ●...
Page 505 7-3. Do-it-yourself maintenance WARNING ■ Removed battery and other parts These parts are small and if swallowed by a child, they can cause choking. Keep away from children. Failure to do so could result in death or serious injury. NOTICE ■...
Page 506: Checking And Replacing Fuses
7-3. Do-it-yourself maintenance Checking and replacing fuses If any of the electrical components do not operate, a fuse may have blown. If this happens, check and replace the fuses as nec- essary. Turn the engine switch to the “LOCK” position (vehicles without a smart key system) or off (vehicles with a smart key system).
Page 507 Type A and B Replace the blown fuse with a new fuse of an appropriate amper- age rating. The amperage rating can be found on the fuse box lid. Type C, D and E Contact your Toyota dealer. Type A Type B ...
Page 508 After a fuse is replaced If the lights do not turn on even after the fuse has been replaced, a bulb may ● need replacement. (P. 509) If the replaced fuse blows again, have the vehicle inspected by your Toyota ● dealer. ■...
Page 509: Light Bulbs
Toy- ota dealer. For more information about replacing other light bulbs, contact your Toyota dealer. Preparing for light bulb replacement Check the wattage of the light bulb to be replaced. (P. 602) Turning off the power back door main switch P.
Page 510 7-3. Do-it-yourself maintenance Bulb locations ■ Front Vehicles without daytime running lights or with bulb type daytime  running lights Headlight high beam and day- Fog light (if equipped) time running lights (if equipped) Front turn signal/parking and Headlight low beam front side marker lights (halogen bulb) Vehicles with LED type daytime running lights...
Page 511 7-3. Do-it-yourself maintenance ■ Rear Vehicles with bulb type stop/tail lights  Rear turn signal light Tail light Back-up light Stop/tail lights License plate lights Vehicles with LED type stop/tail lights  Tail light Back-up light License plate lights Rear turn signal light SIENNA_OM_01999-08001_(U)
Page 512 7-3. Do-it-yourself maintenance Replacing light bulbs ■ Headlight low beams (halogen bulb) For left side only: Open the fuse box cover. (P. 506) Unplug the connector while pushing the lock release. Turn the bulb base counter- clockwise. SIENNA_OM_01999-08001_(U)
Page 513 7-3. Do-it-yourself maintenance Install a new light bulb. Align the 3 tabs on the light bulb with the mounting, and insert. Turn and secure the bulb base. Install the connector. Shake the bulb base gently to check that it is not loose, turn the headlights on once and visu- ally confirm that no light is leak- ing through the mounting.
Page 514 7-3. Do-it-yourself maintenance ■ Headlight high beams and bulb type daytime running lights (if equipped) For left side only: Open the fuse box cover. (P. 506) Turn the bulb base counter- clockwise. Unplug the connector while pushing the lock release. ITO43P165 Install a new light bulb.
Page 515 7-3. Do-it-yourself maintenance ■ Fog lights (if equipped) Remove the engine under cover bolt and pull down the engine under cover. Unplug the connector while pushing the lock release. Turn the bulb base counter- clockwise. SIENNA_OM_01999-08001_(U)
Page 516 7-3. Do-it-yourself maintenance Install a new light bulb. Align the 3 tabs on the light bulb with the mounting and insert. Turn clockwise and secure the bulb base. Install the connector. Shake the connector gently to check that it is not loose, turn the fog lights on once and visu- ally confirm that no light is leak- ing through the mounting.
Page 517 7-3. Do-it-yourself maintenance ■ Front turn signal/parking and front side marker lights (vehicles without daytime running lights or with bulb type daytime run- ning lights) For left side only: Open the fuse box cover. (P. 506) Turn the bulb base counter- clockwise.
Page 518 7-3. Do-it-yourself maintenance ■ Front turn signal lights (vehicles with LED type daytime run- ning lights) For left side only: Open the fuse box cover. (P. 506) Turn the bulb base counter- clockwise. Remove the light bulb. SIENNA_OM_01999-08001_(U)
Page 519 7-3. Do-it-yourself maintenance ■ Front side marker lights (vehicles with LED type daytime run- ning lights) For left side only: Open the fuse box cover. (P. 506) Turn the bulb base counter- clockwise. Remove the light bulb. SIENNA_OM_01999-08001_(U)
Page 520 7-3. Do-it-yourself maintenance ■ Rear turn signal lights (vehicles with LED type stop/tail lights) Remove the securing bolts and remove the unit. Turn the bulb base counter- clockwise. Remove the light bulb. SIENNA_OM_01999-08001_(U)
Page 521 7-3. Do-it-yourself maintenance ■ Rear turn signal lights and stop/tail lights (vehicles with bulb type stop/tail lights) Remove the securing bolts and remove the unit. Unplug the connector while pushing the lock release. Turn the bulb base counter- clockwise. Rear turn signal lights Stop/tail lights Remove the light bulb.
Page 522 7-3. Do-it-yourself maintenance ■ Tail and back-up lights Remove the back door trim board. Turn the bulb base counterclockwise. Vehicles with bulb type Vehicles with LED type stop/tail   stop/tail lights lights Back-up light Tail light Tail light Back-up light Remove the light bulb.
Page 523 Remove the light bulb. ■ Replacing the following bulbs If any of the lights listed below has burnt out, have it replaced by your Toyota dealer. ● Headlight low beams (discharge bulbs) ● Parking lights (LED type) ● Daytime running lights (LED type) ●...
Page 524 Condensation build-up on the inside of the lens Temporary condensation build-up on the inside of the headlight lens does not indicate a malfunction. Contact your Toyota dealer for more information in the following situations: Large drops of water have built up on the inside of the lens.
Page 525 7-3. Do-it-yourself maintenance WARNING ■ Replacing light bulbs Turn off the lights. Do not attempt to replace the bulb immediately after ● turning off the lights. The bulbs become very hot and may cause burns. Do not touch the glass portion of the light bulb with bare hands. When it is ●...
Page 526 When replacing the rear turn signal lights or stop/tail lights Inspect the gasket for any damage (rip, tear, hole, etc.). If there is any dam- age, please contact your Toyota dealer and have the gasket replaced. Improper installation of the gasket may result in water entering the rear light unit.
Page 527: When Trouble Arises
When trouble arises 8-1. Essential information 8-2. Steps to take in an Emergency flashers ..528 emergency If your vehicle needs to If your vehicle has to be towed ......531 be stopped in an emergency ...... 529 If you think something is wrong ......
Page 528: Essential Information
8-1. Essential information Emergency flashers The emergency flashers are used to warn other drivers when the vehicle has to be stopped in the road due to a breakdown, etc. Press the switch. All the turn signal lights will flash. To turn them off, press the switch once again.
Page 529: If Your Vehicle Has To Be Stopped In An Emergency
8-1. Essential information If your vehicle has to be stopped in an emergency Only in an emergency, such as if it becomes impossible to stop the vehicle in the normal way, stop the vehicle using the follow- ing procedure: Steadily step on the brake pedal with both feet and firmly depress it. Do not pump the brake pedal repeatedly as this will increase the effort required to slow the vehicle.
Page 530 8-1. Essential information WARNING ■ If the engine has to be turned off while driving Power assist for the brakes and steering wheel will be lost, making the ● brake pedal harder to depress and the steering wheel heavier to turn. Decelerate as much as possible before turning off the engine.
Page 531: Steps To Take In An Emergency If Your Vehicle Needs To Be Towed
If your vehicle needs to be towed If towing is necessary, we recommend having your vehicle towed by your Toyota dealer or commercial towing service, using a wheel-lift type truck or flat bed truck. Use a safety chain system for all towing, and abide by all state/ provincial and local laws.
Page 532 8-2. Steps to take in an emergency Towing with a wheel-lift type truck From the front (2WD models) From the front (AWD models)   Release the parking brake. Use a towing dolly under the rear wheels. From the rear ...
Page 533 8-2. Steps to take in an emergency WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ■ When towing the vehicle 2WD models: Be sure to transport the vehicle with the front wheels raised or with all four wheels raised off the ground.
Page 534 8-2. Steps to take in an emergency NOTICE ■ To prevent damaging the vehicle when towing using a wheel-lift type truck When raising the vehicle, ensure adequate ground clearance for towing at the opposite end of the raised vehicle. Without adequate clearance, the vehicle could be damaged while being towed.
Page 535: If You Think Something Is Wrong
8-2. Steps to take in an emergency If you think something is wrong If you notice any of the following symptoms, your vehicle proba- bly needs adjustment or repair. Contact your Toyota dealer as soon as possible. Visible symptoms ● Fluid leaks under the vehicle (Water dripping from the air conditioning after use is normal.)
Page 536: Fuel Pump Shut Off System
8-2. Steps to take in an emergency Fuel pump shut off system To minimize the risk of fuel leakage when the engine stalls or when an airbag inflates upon collision, the fuel pump shut off system stops the supply of fuel to the engine. Follow the procedure below to restart the engine after the system is activated.
Page 537: If A Warning Light Turns On Or A Warning Buzzer Sounds
 Immediately stop the vehicle in a safe place and con- (Canada) tact your Toyota dealer. Continuing to drive the vehi- cle may be dangerous. Charging system warning light Indicates a malfunction in the vehicle’s charging system ...
Page 538 Indicates a malfunction in: • The SRS airbag system; • The front passenger occupant classification system; or • The seat belt pretensioner system  Have the vehicle inspected by your Toyota dealer immediately. ABS warning light Indicates a malfunction in: •...
Page 539 When the light comes on after blinking for 1 minute: Malfunction in the tire pressure warning system (P. 542)  Have the system checked by your Toyota dealer. Third seat warning light Indicates that the third seat operation is not yet complete.
Page 540 8-2. Steps to take in an emergency : Parking brake engaged warning buzzer: P. 550 : If equipped : Open door warning buzzer: P. 547 : Driver’s seat belt buzzer: The driver’s seat belt buzzer sounds to alert the driver that his or her seat belt is not fastened.
Page 541 ● If it is, tighten it securely. The light will go off after several driving trips. If the light does not go off even after several trips, contact your Toyota dealer as soon as possible. ■ Electric power steering system warning light (warning buzzer)
Page 542 “ON” position (vehicles without a smart key system) or IGNITION ON mode (vehicles with a smart key system), have it checked by your Toyota dealer. ■ Customization that can be configured at Toyota dealer The vehicle speed linked seat belt reminder buzzer can be disabled.
Page 543 ■ If both the ABS and the brake system warning lights remain on Stop your vehicle in a safe place immediately and contact your Toyota dealer. The vehicle will become extremely unstable during braking, and the ABS system may fail, which could cause an accident resulting in death or serious injury.
Page 544 8-2. Steps to take in an emergency WARNING ■ Maintenance of the tires Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire inflation pressure label (tire and load information label).
Page 545 8-2. Steps to take in an emergency NOTICE ■ To ensure the tire pressure warning system operates properly Do not install tires with different specifications or makers, as the tire pressure warning system may not operate properly. SIENNA_OM_01999-08001_(U)
Page 546: If A Warning Message Is Displayed
The master warning light also comes on or flashes in order to indicate that a message is currently being displayed on the multi-information display. Multi-information display If any of the warning message or indicator comes on again after the following actions have been performed, contact your Toyota dealer. SIENNA_OM_01999-08001_(U)
Page 547 8-2. Steps to take in an emergency Warning message and warning buzzer list Warning message Details/Actions Indicates that: • There is a high possibility of a frontal collision; • The pre-collision braking function is operating A buzzer also sounds (Flashes rapidly) ...
Page 548  Close the back door. Indicates a malfunction in the intuitive parking assist A buzzer also sounds.  Have the vehicle inspected by your Toyota dealer. (If equipped) Indicates that the intuitive parking assist is dirty or covered with ice A buzzer also sounds.
Page 549 Warning message Details/Actions Indicates a malfunction in the EPS (Electric Power Steering) system A buzzer also sounds.  Have the vehicle inspected by your Toyota dealer. Indicates a malfunction in: • The ABS; or • The brake assist system A buzzer also sounds.
Page 550 Indicates that: • The brake fluid level is low; or • The brake system is malfunctioning  Immediately stop the vehicle in a safe place and contact your Toyota dealer. Continuing to drive the vehicle may be dangerous. (U.S.A.) (Canada)
Page 551 Indicates a malfunction in the vehicle’s charging system.  Immediately stop the vehicle in a safe place and contact your Toyota dealer. Continuing to drive the vehicle may be dangerous. Indicates that the radar sensor is dirty or covered with ice A buzzer also sounds.
Page 552 Press the “ON/OFF” button once to deactivate the system, and then press the button again to reactivate the system. A buzzer also sounds.  Have the vehicle inspected by your Toyota dealer. Indicates a malfunction in the PCS (Pre-Collision system) A buzzer also sounds.
Page 553 Toyota dealer. Indicates a malfunction in the Active Torque Control 4WD system A buzzer also sounds.  Have the vehicle inspected by your Toyota dealer. (AWD models) Vehicles without a smart key system: Indicates that the engine switch is turned to the “LOCK”...
Page 554 Toyota dealer. (Flashes) (AWD models) Indicates a malfunction in the brake override sys- A buzzer also sounds.  Have the vehicle inspected by your Toyota dealer. Indicates a malfunction in the Automatic High Beam system A buzzer also sounds.
Page 555 8-2. Steps to take in an emergency Warning message Details/Actions Indicates that the accelerator and brake pedal are being depressed simultaneously  Release the accelerator or brake pedal. (Flashes) Indicates that the washer fluid level is low  Add washer fluid. Indicates that remaining fuel is approximately 3.0 gal.
Page 556 8-2. Steps to take in an emergency Warning message Details/Actions Indicates that all maintenance is required to cor- respond to the driven distance on the mainte- nance schedule Comes on approximately 5000 miles (8000 km) after the message has been reset. (The indicator will not work properly unless the message has been reset.) ...
Page 557 8-2. Steps to take in an emergency ■ Messages displays The message illustrations used are intended as examples, and may differ from the image that is actually displayed on the multi-information display ■ Warning message in dynamic radar cruise control mode (if equipped) In the following situations, the warning message may not be displayed even if vehicle-to-vehicle distance decreases: When your vehicle and the vehicle ahead are traveling at the same speed or...
Page 558 8-2. Steps to take in an emergency Interior Exterior Warning message Details/Actions buzzer buzzer Power was turned off due to the automatic power off function.  Next time when starting the engine, increase the   engine speed slightly and maintain that level...
Page 559 8-2. Steps to take in an emergency Interior Exterior Warning message Details/Actions buzzer buzzer The electronic key was carried outside the vehicle and a door other than the driver’s door was opened and closed while the engine switch was in a mode other than off.
Page 560 8-2. Steps to take in an emergency Interior Exterior Warning message Details/Actions buzzer buzzer • An attempt was made to lock the doors using the smart key system while the electronic key was still inside the vehi- cle. • An attempt was made to lock Sounds either front door by opening a once for...
Page 561 8-2. Steps to take in an emergency Interior Exterior Warning message Details/Actions buzzer buzzer The driver’s door was opened and closed with the engine switch turned off and then the engine switch ACCESSORY mode twice with- out the engine being started. ...
Page 562: If You Have A Flat Tire (Vehicles With Run-Flat Tires)
Run-flat tires (A “RFT” or “DSST” mark is molded on the side- wall) Take your vehicle to the nearest Toyota dealer or authorized tire dealer as soon as possible if any tire goes flat. The vehicle can be driven for a...
Page 563 When a tire is repaired with liquid sealants, the tire pressure warning valve and transmitter may not operate properly. If a liquid sealant is used, contact your Toyota dealer or other qualified service shop as soon as possible. Make sure to replace the tire pressure warning valve and transmitter when replacing the tire.
Page 564: If You Have A Flat Tire (Vehicles With A Compact Spare Tire)
8-2. Steps to take in an emergency If you have a flat tire (vehicles with a compact spare tire) Your vehicle is equipped with a spare tire. The flat tire can be replaced with the spare tire. For details about tires: P. 488 WARNING ■...
Page 565 8-2. Steps to take in an emergency Location of the spare tire, jack and tools Spare tire Wheel nut wrench Jack handle Adapter socket Tire bag Tire strap Jack SIENNA_OM_01999-08001_(U)
Page 566 8-2. Steps to take in an emergency WARNING ■ Using the tire jack Observe the following precautions. Improper use of the tire jack may cause the vehicle to suddenly fall off the jack, leading to death or serious injury. Do not use the tire jack for any purpose other than replacing tires or ●...
Page 567 8-2. Steps to take in an emergency Taking out the jack and tools Remove the cover. Remove the adapter socket. Remove the jack. Remove the wheel nut wrench. SIENNA_OM_01999-08001_(U)
Page 568 8-2. Steps to take in an emergency Taking out the spare tire Slide the front passenger’s seat to the frontmost lock position and the right side second seat to the rearmost lock position so they will not interfere with the jack handle. Open the right side sliding door and you will find the flap on the floor.
Page 569 8-2. Steps to take in an emergency Replacing a flat tire Chock the tires. Flat tire Wheel chock positions Left-hand side Behind the rear right-hand side tire Front Right-hand side Behind the rear left-hand side tire Left-hand side In front of the front right-hand side tire Rear Right-hand side In front of the front left-hand side tire...
Page 570 8-2. Steps to take in an emergency Raise the vehicle until the tire is slightly raised off the ground. Remove all the wheel nuts and the tire. When resting the tire on the ground, place the tire so that the wheel design faces up to avoid scratching the wheel surface.
Page 571 • If there are any cracks or deformations in the bolt screws, nut threads or bolt holes of the wheel, have the vehicle inspected by your Toyota dealer. • When installing the wheel nuts, be sure to install them with the tapered end facing inward.
Page 572 8-2. Steps to take in an emergency Installing the spare tire Remove any dirt or foreign mat- ter from the wheel contact sur- face. If foreign matter is on the wheel contact surface, the wheel nuts may loosen while the vehicle is in motion, causing the tire to come off.
Page 573 8-2. Steps to take in an emergency Stowing the flat tire Take out the strap and tire bag. Place tire standing up in rear tub, after putting the tire in the tire bag. Clip clasp to outboard hook. Clip other clasp to center or opposite hook location.
Page 574 8-2. Steps to take in an emergency Pull strap to tighten and secure tire. Stowing the spare tire Lay down the tire with the outer Valve stem side (valve stem) facing up, and install the holding bracket. Turn the jack handle clockwise to raise the tire until the tire is in the correct position as the jack handle skips.
Page 575 8-2. Steps to take in an emergency ■ The compact spare tire The compact spare tire is identified by the label “TEMPORARY USE ● ONLY” on the tire sidewall. Use the compact spare tire temporarily, and only in an emergency. Make sure to check the tire inflation pressure of the compact spare tire.
Page 576 8-2. Steps to take in an emergency WARNING ■ When using the compact spare tire Remember that the compact spare tire provided is specifically ● designed for use with your vehicle. Do not use your compact spare tire on another vehicle. Do not use more than one compact spare tire simultaneously.
Page 577 When a tire is repaired with liquid sealants, the tire pressure warning valve and transmitter may not operate properly. If a liquid sealant is used, contact your Toyota dealer or other qualified service shop as soon as possible. Make sure to replace the tire pressure warning valve and transmitter when replacing the tire.
Page 578: If The Engine Will Not Start
8-2. Steps to take in an emergency If the engine will not start If the engine will not start even though correct starting proce- dures are being followed (P. 223, 226), consider each of the fol- lowing points: The engine will not start even though the starter motor operates normally.
Page 579 ● There may be a malfunction in the steering lock system (vehicle with a smart key system). Contact your Toyota dealer if the problem cannot be repaired, or if repair procedures are unknown. Emergency start function (vehicles with a smart key system)
Page 580: If The Shift Lever Cannot Be Shifted From P
(a sys- tem to prevent accidental operation of the shift lever). Have the vehicle inspected by your Toyota dealer immediately. The following steps may be used as an emergency measure to ensure that the shift lever can be shifted: Set the parking brake.
Page 581: If The Electronic Key Does Not Operate Properly (Vehicles With A Smart Key System)
3 seconds unlocks the other doors. Starting the engine Shift the shift lever to P and apply the brakes. Touch the Toyota emblem side of the electronic key to the engine switch. An alarm will sound to indicate that...
Page 582 8-2. Steps to take in an emergency ■ Stopping the engine Shift the shift lever to P and press the engine switch as you normally do when stopping the engine. ■ Replacing the key battery As this above procedure is a temporary measure, it is recommended that the electronic key battery be replaced immediately when the battery depletes.
Page 583: If The Battery Is Discharged
The following procedures may be used to start the engine if the vehicle’s battery is discharged. You can call your Toyota dealer or qualified repair shop. If you have a set of jumper (or booster) cables and a second vehicle with a 12-volt battery, you can jump start your vehicle by following the steps below.
Page 584 To install the engine cover, conduct the removal procedure in reverse. After installing, check that the fixed pins are inserted securely. Once the engine starts, have the vehicle inspected at your Toyota dealer as soon as possible. SIENNA_OM_01999-08001_(U)
Page 585 8-2. Steps to take in an emergency ■ Starting the engine when the battery is discharged The engine cannot be started by push-starting. ■ To prevent battery discharge Turn off the headlights and the audio system while the engine is off. ●...
Page 586 8-2. Steps to take in an emergency WARNING ■ Avoiding battery fires or explosions Observe the following precautions to prevent accidentally igniting the flam- mable gas that may be emitted from the battery: Make sure the jumper cable is connected to the correct terminal and that it ●...
Page 587: If Your Vehicle Overheats
If you do not see steam: Carefully lift the hood. After the engine has cooled down sufficiently, inspect the hoses and radiator core (radiator) for any leaks. Radiator Cooling fans If a large amount of coolant leaks, immediately contact your Toyota dealer. SIENNA_OM_01999-08001_(U)
Page 588 (The fans may not operate in freezing temperatures.) If the fans are not operating: Stop the engine immediately and contact your Toyota dealer. If the fans are operating: Have the vehicle inspected at the nearest Toyota dealer.
Page 589 8-2. Steps to take in an emergency WARNING ■ When inspecting under the hood of your vehicle Observe the following precautions. Failure to do so may result in serious injury such as burns. If steam is seen coming from under the hood, do not open the hood until ●...
Page 590: If The Vehicle Becomes Stuck
8-2. Steps to take in an emergency If the vehicle becomes stuck Carry out the following procedures if the tires spin or the vehicle becomes stuck in mud, dirt, or snow: Stop the engine. Set the parking brake and shift the shift lever to P. Remove the mud, snow, or sand from around the stuck tire.
Page 591 8-2. Steps to take in an emergency WARNING ■ When attempting to free a stuck vehicle If you choose to push the vehicle back and forth to free it, make sure the surrounding area is clear to avoid striking other vehicles, objects or people. The vehicle may also lunge forward or lunge back suddenly as it becomes free.
Page 592 8-2. Steps to take in an emergency SIENNA_OM_01999-08001_(U)
Page 593: Vehicle Specifications
Vehicle specifications 9-1. Specifications Maintenance data (fuel, oil level, etc.) ..594 Fuel information ....603 Tire information ....606 9-2. Customization Customizable features ..617 9-3. Initialization Items to initialize ....628 SIENNA_OM_01999-08001_(U)
Page 594: Specifications Maintenance Data
(with towing package : Unladen vehicle : The model code is indicated on the Certification Label. For details, see “Vehicle identification” below. : The towing package is required. Toyota does not recommend towing with this vehicle without the towing package. SIENNA_OM_01999-08001_(U)
Page 595 The vehicle identification number (VIN) is the legal identifier for your vehicle. This is the primary identification number for your Toyota. It is used in registering the ownership of your vehicle. This number is stamped on the top left of the instrument panel.
Page 596 9-1. Specifications Engine Model 3.5L 6-cylinder (2GR-FE) Type 6-cylinder V type, 4-cycle, gasoline Bore and stroke 3.70  3.27 in. (94.0  83.0 mm) Displacement 210.9 cu.in. (3456 cm Drive belt tension Automatic adjustment Valve clearance Fuel Fuel type Unleaded gasoline only Octane rating 87 (Research Octane Number 91) or higher Fuel tank capacity...
Page 597 9-1. Specifications ■ Engine oil selection “Toyota Genuine Motor Oil” is used in your Toyota vehicle. Use Toyota approved “Toyota Genuine Motor Oil” or equivalent to satisfy the following grade and viscosity. Oil grade: ILSAC GF-5 multigrade engine oil Recommended viscosity: SAE 0W-20...
Page 598 With towing package  11.7 qt. (11.1 L, 9.8 Imp.qt.) Use either of the following. • “Toyota Super Long Life Coolant” • A similar high-quality ethylene glycol-based Coolant type non-silicate, non-amine, non-nitrite, and non- borate coolant with long-life hybrid organic acid technology Do not use plain water alone.
Page 599 Oil type and viscosity GL-5 or equivalent Your Toyota vehicle is filled with “Toyota Genuine Differential Gear Oil” at the factory. Use Toyota approved “Toyota Genuine Differential Gear Oil” or an equivalent of matching quality to satisfy the above specification. Please contact your Toyota dealer for further details.
Page 600 9-1. Specifications Brakes Pedal clearance 2.99 in. (76 mm) Pedal free play 0.04  0.24 in. (1  6 mm) Brake pad wear limit 0.04 in. (1.0 mm) Parking brake lining wear limit 0.04 in. (1.0 mm) Parking brake pedal travel 3 ...
Page 601 9-1. Specifications 19-inch tires  Tire size P235/50R19 99V Front: Tire inflation pressure 36 psi (250 kPa, 2.5 kgf/cm or bar) (Recommended cold tire Rear: inflation pressure) 36 psi (250 kPa, 2.5 kgf/cm or bar) Wheel size 19 x 7J Wheel nut torque 76 ft•lbf (103 N•m, 10.5 kgf•m) Compact spare tire (2WD models)
Page 602 9-1. Specifications Light bulbs Light bulbs Bulb No. Type Headlights (low beam) Discharge bulbs  Halogen bulbs  Headlights (high beam) 9005 Fog lights  Front side marker lights Front turn signal lights 7444NA 28/8 Front turn signal/parking and Exterior 3457NAK 28/8 front side marker lights...
Page 603: Fuel Information
In very few cases, driveability problems may be caused by the brand of gaso- line you are using. If driveability problems persist, try changing the brand of gasoline. If this does not correct the problem, consult your Toyota dealer. ■...
Page 604 Non-recommendation of the use of gasoline containing MMT Some gasoline contains an octane enhancing additive called MMT (Methylcyclopentadienyl Manganese Tricarbonyl). Toyota does not recommend the use of gasoline that contains MMT. If fuel containing MMT is used, your emission control system may be adversely affected.
Page 605 9-1. Specifications NOTICE ■ Notice on fuel quality Do not use improper fuels. If improper fuels are used, the engine will be ● damaged. Do not use leaded gasoline. ● Leaded gasoline can cause damage to your vehicle’s catalytic converters causing the emission control system to malfunction.
Page 606: Tire Information
9-1. Specifications Tire information Typical tire symbols Run-flat tire or full-size tire  Compact spare tire  SIENNA_OM_01999-08001_(U)
Page 607 9-1. Specifications Tire size (P. 608) DOT and Tire Identification Number (TIN) (P. 608) Uniform tire quality grading For details, see “Uniform Tire Quality Grading” that follows. Location of treadwear indicators (P. 488) Run-flat tire (RFT) or standard tire (P. 562) This vehicle can be equipped with either run-flat tires (RFT) or stan- dard tires.
Page 608 9-1. Specifications Typical DOT and Tire Identification Number (TIN) DOT symbol Tire Identification Number (TIN) Tire manufacturer’s identifica- tion mark Tire size code Manufacturer’s optional tire type code (3 or 4 letters) Manufacturing week Manufacturing year : The DOT symbol certifies that the tire conforms to applicable Federal Motor Vehicle Safety Standards.
Page 609 9-1. Specifications ■ Tire dimensions Section width Tire height Wheel diameter Tire section names Bead Sidewall Shoulder Tread Belt Inner liner Reinforcing rubber Carcass Rim lines Bead wires Chafer SIENNA_OM_01999-08001_(U)
Page 610 U.S. Department of Transportation. It provides the purchasers and/or prospective purchasers of Toyota vehicles with information on uniform tire quality grading. Your Toyota dealer will help answer any questions you may have as you read this information. ■ DOT quality grades All passenger vehicle tires must conform to Federal Safety Requirements in addition to these grades.
Page 611 9-1. Specifications ■ Temperature A, B, C The temperature grades are A (the highest), B, and C, representing the tire’s resistance to the generation of heat and its ability to dissi- pate heat when tested under controlled conditions on a specified indoor laboratory test wheel.
Page 612 9-1. Specifications Glossary of tire terminology Tire related term Meaning Tire pressure when the vehicle has been Cold tire inflation parked for three hours or more, or has not pressure been driven more than 1 mile or 1.5 km under that condition The maximum cold inflated pressure to which Maximum inflation...
Page 613 9-1. Specifications Tire related term Meaning A metal support for a tire or a tire and tube assembly upon which the tire beads are seated Rim diameter Nominal diameter of the bead seat (Wheel diameter) Rim size designation Rim diameter and width The industry manufacturer’s designation for a Rim type designation rim by style or code...
Page 614 9-1. Specifications Tire related term Meaning The parting of cords from adjacent rubber Cord separation compounds Any parting within the tread, sidewall, or inner- Cracking liner of the tire extending to cord material A pneumatic tire with an inverted flange tire and rim system in which the rim is designed with rim flanges pointed radially inward and the tire is designed to fit on the underside of...
Page 615 9-1. Specifications Tire related term Meaning Any parting at any junction of tread, sidewall, Open splice or innerliner that extends to cord material Outer diameter The overall diameter of an inflated new tire The linear distance between the exteriors of the sidewalls of an inflated tire, including ele- Overall width vations due to labeling, decorations, or protec-...
Page 616 9-1. Specifications Tire related term Meaning A tire that attains a traction index equal to or greater than 110, compared to the ASTM E- 1136 Standard Reference Test Tire, when using the snow traction test as described in Snow tire ASTM F-1805-00, Standard Test Method for Single Wheel Driving Traction in a Straight Line on Snow-and Ice-Covered Surfaces, and...
Page 617: Customization
The settings of these features can be changed using the multi-information display, the audio system screen or at your Toyota dealer. Some function settings are changed simultaneously with other func- tions being customized. Contact your Toyota dealer for further details. Customizing vehicle features ■...
Page 618 9-2. Customization ■ Changing using the multi-information display Vehicles with monochrome display  Press the “DISP” switch to display the “SETTINGS” screen while the vehicle is stopped, and then press and hold the “DISP” switch to display the customize mode screen. Press the “DISP”...
Page 619 Customizable features Settings that can be changed using the audio system screen Settings that can be changed using the multi-information display Settings that can be changed by your Toyota dealer Definition of symbols: O = Available, – = Not available ■...
Page 620 9-2. Customization Customized Function Default setting setting Distance to – – empty Drive information 1 Average fuel – – economy Current fuel – – economy Drive information 2 Average speed – – Trip distance – – Drive information 3 Trip elapsed –...
Page 621 9-2. Customization : For details about each function: P. 90, 97 : The default setting varies according to country. : Customized items are the following items except for default setting items: average fuel economy, tank average fuel economy, trip average fuel econ- omy, current fuel economy, distance to empty, trip distance, distance, trip elapsed time, elapsed time, trip average speed, average speed, blank.
Page 622 9-2. Customization ■ Door lock (P. 110, 581) Customized Function Default setting setting Driver’s door unlocked in All doors Unlocking using a key one step, all unlocked in – – doors unlocked one step in two steps Shifting the Vehicle speed shift lever to is approxi- Automatic door lock...
Page 623 9-2. Customization ■ Smart key system (P. 142) Customized Function Default setting setting Smart key system – Number consecutive As many as 2 times – – door lock operations desired : If equipped ■ Wireless remote control (P. 105) Customized Function Default setting setting...
Page 624 9-2. Customization ■ Power sliding door (P. 121) Customized Function Default setting setting Operation signal (buzzer) – – Press twice Opening and closing Press and hold – – One short operation press : If equipped ■ Driving position memory (P. 168) Customized Function Default setting...
Page 625 9-2. Customization ■ Automatic light control system (P. 237) Customized Function Default setting setting Light sensor sensitivity Standard -2 to 2 – Time elapsed before head- lights automatically turn off 30 seconds 60 seconds – after doors are closed 90 seconds Automatic High Beam –...
Page 626 9-2. Customization ■ Illumination (P. 419) Customized Function Default setting setting Time elapsed before the 15 seconds 7.5 seconds – interior lights turn off 30 seconds Operation after the engine switch is turned to the “LOCK” position (vehicles – – without a smart key sys- tem) or off (vehicles with a smart key system)
Page 627 9-2. Customization ■ Vehicle customization When the speed-detecting automatic door lock and shift-linked automatic ● door lock are both on, the door lock operates as follows: • When shifting the shift position to any position other than P, all the doors will be locked.
Page 628: 9-3. Initialization
9-3. Initialization Items to initialize The following items must be initialized for normal system opera- tion after such cases as the battery being reconnected, or main- tenance being performed on the vehicle. Item When to initialize Reference Power sliding door After reconnecting or changing the P.
Page 629: For Owners
For owners Reporting safety defects for U.S. owners......630 Seat belt instructions for Canadian owners (in French) ....... 631 SRS airbag instructions for Canadian owners (in French) ....... 633 SIENNA_OM_01999-08001_(U)
Page 630: Reporting Safety Defects For U.s. Owners
National Highway Traffic Safety Administration (NHTSA) in addi- tion to notifying Toyota Motor Sales, U.S.A., Inc. (Toll-free: 1-800- 331-4331). If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign.
Page 631: Seat Belt Instructions For Canadian Owners (In French)
Seat belt instructions for Canadian owners (in French) The following is a French explanation of seat belt instructions extracted from the seat belt section in this manual. See the seat belt section for more detailed seat belt instructions in English. Utilisation adéquate des ceintures de sécurité...
Page 632 Entretien et soin ■ Ceintures de sécurité Avec un chiffon ou une éponge, nettoyez à l’aide d’un savon doux et de l’eau tiède. Vérifiez aussi les ceintures régulièrement pour vous assurer qu’elles ne présentent pas d’usure excessive, d’effilo- chage ou de coupures. AVERTISSEMENT ■...
Page 633: Srs Airbag Instructions For Canadian Owners (In French)
SRS airbag instructions for Canadian owners (in French) The following is a French explanation of SRS airbag instructions extracted from the SRS airbag section in this manual. See the SRS airbag section for more detailed seat belt instructions in English. ◆...
Page 634 ◆ Coussins gonflables SRS latéraux et en rideau Coussins gonflables SRS latéraux Peuvent aider à protéger le torse des occupants des sièges avant Coussins gonflables SRS en rideau ● Peuvent aider à protéger principalement la tête des occupants des sièges latéraux ●...
Page 635 Composants du système de coussins gonflables SRS Coussin gonflable du passager Coussin gonflable du conduc- avant teur Coussins gonflables en rideau Capteurs d’impact latéral (por- tière avant) Coussins gonflables latéraux Contacteur de boucle de cein- Limiteurs de force et dispositifs ture de sécurité...
Page 636 Votre véhicule est doté de COUSSINS GONFLABLES ÉVOLUÉS dont la conception s’appuie sur les normes de sécurité des véhicules à moteur américains (FMVSS208). Le module de capteur de coussin gonflable (ECU) contrôle le déploiement des coussins gonflables en fonction des informations obtenues des capteurs et d’autres éléments affichés dans le diagramme des composants du système ci-dessus.
Page 637 AVERTISSEMENT ■ Précautions relatives aux coussins gonflables SRS Observez les précautions suivantes en ce qui concerne les coussins gonfla- bles SRS. Les négliger pourrait occasionner des blessures graves, voire mortelles. Le conducteur et tous les passagers du véhicule doivent porter leur cein- ●...
Page 638 Un bébé ou un enfant trop petit pour utiliser une ceinture de sécurité doit être correctement retenu à l’aide d’un dispositif de retenue pour enfants. Toyota recommande vivement de placer et d’attacher correcte- ment tous les bébés et tous les enfants sur les sièges arrière du véhicule à...
Page 639 AVERTISSEMENT ■ Précautions relatives aux coussins gonflables SRS Ne vous asseyez pas sur le bord du ● siège et ne vous appuyez pas sur la planche de bord. Ne laissez pas un enfant se tenir face ● au coussin gonflable SRS du passager avant ni s’asseoir sur les genoux d’un passager avant.
Page 640 AVERTISSEMENT ■ Précautions relatives aux coussins gonflables SRS Ne fixez et n’appuyez rien sur des ● zones telles que la planche de bord, le tampon de volant ou encore la partie inférieure du tableau de bord. Ces objets peuvent se transformer en projectiles lorsque les coussins gonfla- bles SRS du conducteur, du passager avant et de protection des genoux du...
Page 641 ● le tampon de volant et les garnitures des montants avant et arrière, sont endommagés ou fissurés, faites-les remplacer par votre concessionnaire Toyota. Ne placez aucun objet, par exemple un coussin, sur le siège du passager ● avant. Cela disperserait le poids du passager, ce qui empêcherait le cap- teur de le détecter correctement.
Page 642 SRS Ne mettez pas votre véhicule au rebut et n’effectuez aucune des modifica- tions suivantes sans d’abord consulter votre concessionnaire Toyota. Les coussins gonflables SRS pourraient fonctionner de manière incorrecte ou se déployer (gonfler) accidentellement, ce qui serait susceptible d’occa- sionner des blessures graves, voire mortelles.
Page 643: Index
Index What to do if... (Troubleshooting) ....644 Alphabetical index ..... 649 For vehicles with an Entune Audio Plus or Entune Premium Audio with Navigation, refer to the “NAVIGATION AND MULTIMEDIA SYSTEM OWNER’S MANUAL” for information regarding the equipment listed below. •...
Page 644 You lose your keys ● If you lose your keys or mechanical keys, new genuine keys or mechanical keys can be made by your Toyota dealer. (P. 107) ● If you lose your keys or electronic keys, the risk of vehicle theft increases significantly.
Page 645 What to do if... (Troubleshooting) If you think something is wrong The engine does not start (vehicles without a smart key system) ● Is the shift lever in P? (P. 223) ● Is the steering wheel unlocked? (P. 224) ● Is the battery discharged? (P.
Page 646 What to do if... (Troubleshooting) The steering wheel cannot be turned after the engine is stopped ● Vehicles without a smart key system: It is locked to prevent theft of the vehicle if the key is removed from the engine switch. (P. 224) ●...
Page 647 What to do if... (Troubleshooting) A warning buzzer sounds during driving ● The seat belt reminder light is flashing Are the driver and the front passenger wearing the seat belts? (P. 539) ● The brake system warning light is on Is the parking brake released? (P.
Page 648 ● Vehicles with run-flat tires: Slow down the vehicle, drive with extra caution, and take your vehicle to the nearest Toyota dealer or authorized tire dealer as soon as possi- ble to have the tire replaced. (P. 562) ● Vehicles with a compact spare tire: Stop the vehicle in a safe place and replace the flat tire with the spare tire.
Page 649: Alphabetical Index
Alphabetical index Alphabetical index Airbags ........36 Airbag operating A/C ........404, 413 conditions ......45 Air conditioning filter ..... 501 Airbag precautions Front automatic air for your child......39 conditioning system.... 404 Airbag warning light ....538 Rear automatic air Correct driving posture ...
Page 650 Alphabetical index Alarm Automatic transaxle Alarm ........77 Automatic transaxle ....231 Warning buzzer..... 537 If the shift lever cannot be shifted from P ..... 580 Anchor brackets ......60 S mode ......... 232 Antenna Smart key system ....142 .........
Page 651 Alphabetical index Child safety ........ 55 Airbag precautions....39 Care Back door precautions..138 Aluminum wheels....461 Battery precautions..486,586 Exterior ......... 460 Child restraint system ..... 56 Interior........463 How your child should wear Seat belts......463 the seat belt......32 Cargo capacity......
Page 652 Alphabetical index Driving Break-in tips......193 Daytime running light Correct posture....... 26 system........240 Procedures ......192 Defogger Winter driving tips ....311 Outside rear view mirrors..408 Rear window ......408 Driving position memory ..168 Driving position memory ..169 Windshield ......
Page 653 Alphabetical index Emergency, in case of Engine coolant If a warning buzzer Capacity........ 598 sounds........ 537 Checking....... 481 If a warning light turns on..537 Preparing and checking If a warning message is before winter ...... 311 displayed ......546 Engine coolant temperature If the battery is discharged..
Page 654 Alphabetical index Fuel Capacity........ 596 Flat tire......562, 564 Fuel gauge......88 Floor mats ........24 Fuel pump shut off system ... 536 Fluid Gas station information..664 Automatic transaxle ....599 Information......603 Brake ........483 Refueling ......254 Transfer ........
Page 655 Alphabetical index Hands-free system I/M test ........472 (for cellular phone) ..... 366 Identification Engine ........595 HDMI port Head restraints ......172 Vehicle........595 Headlights Ignition switch Automatic High Beam (engine switch)....223, 226 system ........ 242 Illuminated entry system ..421 Discharge headlights Indicators ........
Page 656 Alphabetical index License plate lights Light switch......237 Keyless entry Replacing light bulbs .... 523 Smart key system ....142 Wattage ........ 602 Wireless remote control ..105 Light bulbs Keys Replacing......509 Battery-saving function ..144 Wattage ........ 602 Electronic key .......
Page 657 Alphabetical index Maintenance Navigation system Do-it-yourself Noise from under vehicle ... 8 maintenance....... 473 General maintenance ... 469 Maintenance data ....594 Odometer ........88 Maintenance requirements ... 466 Malfunction indicator lamp..537 Engine oil......596 Manual headlight leveling Opener dial ..........
Page 658 Alphabetical index Parking assist sensors Quarter windows ..... 186 (intuitive parking assist)..273 Parking brake......236 Operation ......236 Radar cruise control Parking brake (dynamic radar cruise engaged warning control)........261 buzzer/message ..537, 550 Radiator........483 Parking lights ........335 Radio Light switch ......
Page 659 Alphabetical index Reporting safety defects for Seats Adjustment....148, 151 U.S. owners......630 Adjustment Roof luggage carrier ....203 precaution ....150, 165 Resetting the message Child seats/child restraint indicating maintenance is system installation....56 required........467 Cleaning ....... 463 Driver’s seat position memory ......
Page 660 Alphabetical index “DISP” switch......90 Smart key system Antenna location ....142 Door lock switch ....114 Entry function..110, 121, 132 Driving position memory Starting the engine....226 switches ......168 Warning message....558 Emergency flashers switch ......... 528 Snow tires ........
Page 661 Alphabetical index Tires Chains ........312 Tachometer ........ 88 Checking....... 488 Tail lights Glossary ....... 612 Light switch ......237 If you have a flat tire ..562, 564 Replacing light Inflation pressure ....496 bulbs....520, 522, 523 Information......606 Wattage ........
Page 662 Alphabetical index Warning lights ABS ........538 USB memory ......347 Brake system......537 USB port ........322 Charging system....537 Electric power steering system........ 538 Valet key ........104 Low engine oil pressure..537 Vanity lights Low fuel level......539 Vanity lights ......
Page 663 Alphabetical index Windows Power windows..... 183 Quarter windows....186 Rear window defogger..408 Washer ......248, 252 Windshield wiper de-icer ..408 Windshield wipers Intermittent windshield wipers ......... 248 Rain-sensing windshield wipers ......... 249 Winter driving tips ....311 Wireless remote control key Battery-saving function ..
Page 664: Gas Station Information
(L, Imp.qt.) (Drain and refill — Without filter 6.0 (5.7, 5.0) reference) With filter 6.4 (6.1, 5.4) “Toyota Genuine Motor Oil” or equivalent Oil grade: ILSAC GF-5 multigrade engine oil Engine oil type Recommended oil viscosity: SAE 0W-20 P. 597 SIENNA_OM_01999-08001_(U)

Toyota 2015 Sienna Manual

1 For Safety and Security

1-1. for Safe Use

Theft Deterrent System

2 Instrument Cluster

Instrument Cluster Warning Lights and Indicators

3 Operation of each Component

3-1. Key Information

3-3. Adjusting the Seats

4 Driving

4-1. before Driving

Refueling

Using the Driving Support

Driving Tips

5 Audio System

Basic Operations

Setup

5-3. Using the Multimedia System

Using the Radio

Using an External Device

Connecting Bluetooth

Bluetooth ® Audio

Bluetooth ® Phone Message Function

Bluetooth

Using the Voice

6 Interior Features

6-1. Using the Air Conditioning

Using the Interior Lights

6-3. Using the Storage Features

7 Maintenance and Care

Maintenance and Care Cleaning and Protecting

Maintenance Maintenance Requirements

Do-It-Yourself Maintenance Do-It-Yourself Service

8 When Trouble Arises

Essential Information

Steps to Take in an Emergency if Your Vehicle Needs to be Towed

9 Vehicle Specifications

Specifications Maintenance Data

Customization

9-3. Initialization

10 For Owners

Index

Quick Links

Troubleshooting

Related Manuals for Toyota 2015 Sienna

Summary of Contents for Toyota 2015 Sienna