Pictorial index Search by illustration For safety Make sure to read through them and security Instrument How to read the gauges and meters, the variety of cluster warning lights and indicators, etc. Operation of Opening and closing the doors and windows, each component adjustment before driving, etc.
TABLE OF CONTENTS For your information .......8 Instrument cluster Reading this manual.....14 How to search ......15 Pictorial index .......16 Instrument cluster Warning lights For safety and security and indicators....106 Gauges and meters... 112 Multi-information display 1-1. For safe use (Type A) ......
Page 3
3-5. Opening and closing 4-4. Refueling the windows Opening the fuel tank Power windows....184 cap ........252 Quarter windows 4-5. Using the driving support (smart-cab models)..188 systems Back window Cruise control ....257 (sliding type) ....189 Rear view monitor system......261 Driving Four-wheel drive system ...
Page 4
TABLE OF CONTENTS 5-5. Using an external device Interior features Listening to an iPod ...333 Listening USB memory device ......341 6-1. Using the air conditioning Using the AUX port ....348 system and defogger ® Manual air conditioning 5-6. Using Bluetooth devices ®...
Page 5
8-2. Steps to take in an Maintenance and care emergency If your vehicle needs to be towed ..... 479 7-1. Maintenance and care If you think something is Cleaning and protecting wrong ......484 the vehicle exterior ..416 Fuel pump shut off Cleaning and protecting system (gasoline engine the vehicle interior ...419...
Page 6
TABLE OF CONTENTS Vehicle specifications 9-1. Specifications Maintenance data (fuel, oil level, etc.)...536 Fuel information ....560 9-2. Customization Customizable features ..563 9-3. Initialization Item to initialize ....569 Index What to do if... (Troubleshooting) .....572 Alphabetical index ......576 For vehicles with navigation system or multimedia system, refer to the “Navigation and multimedia system Owner’s manual”...
Accessories, spare parts and modification of your Toyota Both genuine Toyota and a wide variety of other spare parts and accessories for Toyota vehicles are currently available on the market. Should it be deter-...
Page 9
Scrapping of your Toyota The SRS airbag and seat belt pretensioner devices in your Toyota contain explosive chemicals. If the vehicle is scrapped with the airbags and seat belt pretensioners left as they are, this may cause an accident such as fire. Be...
Page 10
WARNING ■ General precautions while driving Driving under the influence: Never drive your vehicle when under the influ- ence of alcohol or drugs that have impaired your ability to operate your vehi- cle. Alcohol and certain drugs delay reaction time, impair judgment and reduce coordination, which could lead to an accident that could result in death or serious injury.
Page 11
Checking your vehicle’s model Check the model code to see what type of model your vehicle is. G U N 1 2 5 – D T T H Basic code ∗ TGN1 6: Models with 2TR-FE engine ∗ GUN1 6: Models with 1GD-FTV engine ∗...
Page 12
Transmission type T: Automatic transmission M: 5-speed manual transmission F: 6-speed manual transmission Grade H: HIGH M: MID S: STD L: LOW X: LOWEST Destination Models for European countries etc. Models for Caucasus area etc. Blank: Models for Kazakhstan etc. The model code appears on the manufacturer’s label or plate with the head- ing “MODEL”.
Page 13
The label or plate is placed as shown in the following illustrations. Type A The manufacturer’s label is located on the left pillar. Type B The manufacturer’s label is located on the left pillar. Type C The manufacturer’s label is located on the left pillar.
Reading this manual WARNING: Explains something that, if not obeyed, could cause death or serious injury to people. NOTICE: Explains something that, if not obeyed, could cause damage to or a malfunction in the vehicle or its equipment. Indicates operating or working procedures. Follow the steps 1 2 3 in numerical order.
How to search Searching by name ■ • Alphabetical index ..P. 576 Searching installation ■ position • Pictorial index....P. 16 Searching by symptom or ■ sound • What to do if... (Troubleshooting) ..P. 572 Searching by title ■...
Pictorial index Pictorial index ■ Exterior The shape of the headlights may differ depending on the grade, etc. (→P. 460) Side doors ........P. 144 Access panels (smart-cab models only) .
Page 17
Pictorial index Windshield wipers ....... . . P. 249 Precautions against winter season ..... P. 305 Fuel filler door .
Page 18
Pictorial index ■ Instrument panel (Left-hand drive vehicles) Engine switch ....... . P. 215, 219 Starting the engine/changing the positions or modes .
Page 19
Pictorial index Meters ......... . . P. 112 Reading the meters .
Page 20
Pictorial index ■ Switches (Left-hand drive vehicles) Power window switches ......P. 184 Window lock switch .
Page 21
Pictorial index 1, 2 Audio remote control switches ....P. 312 1, 2 Talk switch Meter control switches ......P. 121 “DISP”...
Page 22
Pictorial index Emergency flasher switch ......P. 476 Front-wheel drive control switch ....P. 272 Power outlets .
Page 24
Pictorial index Cup holders ........P. 403 Auxiliary boxes .
Page 25
Pictorial index Inside rear view mirror ......P. 180 Sun visors ........P. 409 Vanity mirror .
Page 26
Pictorial index ■ Instrument panel (Right-hand drive vehicles) Engine switch ....... . P. 215, 219 Starting the engine/changing the positions or modes .
Page 27
Pictorial index Meters ......... . . P. 112 Reading the meters .
Page 28
Pictorial index ■ Switches (Right-hand drive vehicles) Power window switches ......P. 184 Window lock switch .
Page 29
Pictorial index 1, 2 Audio remote control switches ....P. 312 1, 2 Talk switch Meter control switches ......P. 121 “DISP”...
Page 30
Pictorial index Emergency flasher switch ......P. 476 Front-wheel drive control switch ....P. 272 Power outlets .
For safety and security 1-1. For safe use Before driving.......36 For safety drive ....38 Seat belts......40 SRS airbags......45 Exhaust gas precautions ..56 1-2. Child safety Front passenger occupant classification system..57 Airbag manual on-off system .......62 Riding with children....64 Child restraint systems ..65 1-3.
1-1. For safe use Before driving Floor mat Use only floor mats designed specifically for vehicles of the same model and model year as your vehicle. Fix them securely in place onto the carpet. Insert the retaining hooks (clips) into the floor mat eyelets. Turn the upper knob of each retaining hook (clip) to secure the floor mats in place.
Page 37
When installing the driver’s floor mat ● Do not use floor mats designed for other models or different model year vehicles, even if they are Toyota Genuine floor mats. ● Only use floor mats designed for the driver’s seat. ●...
1-1. For safe use For safety drive For safe driving, adjust the seat and mirror to an appropriate position before driving. Correct driving posture Adjust the angle of the seat- back so that you are sitting straight up and so that you do not have to lean forward to steer.
1-1. For safe use Adjusting the mirrors Make sure that you can see backward clearly by adjusting the inside and outside rear view mirrors properly. (→P. 180, 181) WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ●...
1-1. For safe use Seat belts Make sure that all occupants are wearing their seat belts before driving the vehicle. Correct use of the seat belts ◆ 3-point type ● Extend the shoulder belt so that it comes fully over the shoulder, but does not come into contact with the neck or slide off the shoulder.
Page 41
1-1. For safe use Fastening and releasing the seat belt To fasten the seat belt, push the plate into the buckle until a click sound is heard. To release the seat belt, press the release button. Release button Adjusting the seat belt shoulder anchor height (if equipped for front seats) Push the seat belt shoulder anchor down while pulling the...
Page 42
■ Seat belt regulations If seat belt regulations exist in the country where you reside, please contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional for seat belt replacement or installation.
Page 43
Each seat belt should be used by one person only. Do not use a seat belt for more than one person at once, including children. ● Toyota recommends that children be seated in the rear seat and always use a seat belt and/or an appropriate child restraint system. ●...
Page 44
Ensure that the belt and plate are locked and the belt is not twisted. If the seat belt does not function correctly, immediately contact any autho- rized Toyota dealer or repairer, or another duly qualified and equipped pro- fessional. ●...
1-1. For safe use ∗ SRS airbags The SRS airbags inflate when the vehicle is subjected to certain types of severe impacts that may cause significant injury to the occupants. They work together with the seat belts to help reduce the risk of death or serious injury.
Page 46
1-1. For safe use SRS airbag system components Front impact sensors Safing sensor (front) equipped) Front passenger occupant clas- sification system (ECU and Side airbags (if equipped) sensors) (if equipped) Curtain shield airbags “PASSENGER AIR BAG” indi- (if equipped) cator (if equipped) Side impact sensors (rear) Airbag manual on-off switch (if equipped)
Page 47
1-1. For safe use The main SRS airbag system components are shown above. The SRS airbag system is controlled by the airbag sensor assembly. As the airbags deploy, a chemical reaction in the inflators quickly fills the airbags with non-toxic gas to help restrain the motion of the occu- pants.
Page 48
An infant or child who is too small to use a seat belt should be properly secured using a child restraint system. Toyota strongly recommends that all infants and children be placed in the rear seats (if equipped) of the vehicle and properly restrained.
Page 49
1-1. For safe use WARNING ■ SRS airbag precautions ● Vehicles with SRS side and curtain shield airbags: Do not lean against the door, the roof side rail or the front, side and rear pillars. ● Vehicles with SRS side and curtain shield airbags: Do not allow anyone to kneel on the passenger seat toward the door or put their head or hands outside...
Page 50
Vehicles without SRS side and curtain shield airbags: If the areas where the SRS airbags are stored, such as the steering wheel pad, are damaged or cracked, have them replaced by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional.
Page 51
Modification and disposal of SRS airbag system components Do not dispose of your vehicle or perform any of the following modifications without consulting any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. The SRS airbags may malfunction or deploy (inflate) accidentally, causing death or serious injury.
Page 52
1-1. For safe use ■ If the SRS airbags deploy (inflate) ● Bruising and slight abrasions may result from contact with a deploying (inflating) SRS airbag. ● A loud noise and white powder will be emitted. ● Vehicles without SRS curtain shield airbags: Parts of the airbag module (steering wheel hub, airbag cover and inflator) as well as the front seats may be hot for several minutes.
Page 53
1-1. For safe use ■ SRS airbag deployment conditions (SRS side and curtain shield airbags) ● The SRS side and curtain shield airbags will deploy in the event of an impact that exceeds the set threshold level (the level of force corresponding to the impact force produced by an approximately 1500 kg [3300 lb.] vehicle colliding with the vehicle cabin from a direction perpendicular to the vehicle orientation at an approximate speed of 20 - 30 km/h [12 - 18 mph]).
Page 54
When to contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional In the following cases, the vehicle will require inspection and/or repair. Con- tact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional as soon as possible. ●...
Page 55
1-1. For safe use ● Vehicles with SRS side and curtain shield airbags: A portion of a door or its surrounding area damaged deformed, or the vehicle was involved in an accident that was not severe enough to cause the SRS side and curtain shield airbags to inflate.
The exhaust system needs to be checked periodically. If there is a hole or crack caused by corrosion, damage to a joint or abnormal exhaust noise, be sure to have the vehicle inspected and repaired by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional.
1-2. Child safety Front passenger occupant classification ∗ system Your vehicle is equipped with a front passenger occupant classi- fication system. This system detects the conditions of the front passenger seat and activates or deactivates the devices for the front passenger. SRS warning light Seat belt reminder light “PASSENGER AIR BAG”...
Page 58
1-2. Child safety Condition and operation in the front passenger occupant classi- fication system Adult ■ “PASSENGER AIR BAG” indicator ON indicator Indicator/ SRS warning light warning light Seat belt reminder light flashing Front passenger airbag Side airbag on the front passenger seat Devices Activated Curtain shield airbag in the front...
Page 59
1-2. Child safety Unoccupied ■ “PASSENGER AIR BAG” indicator Not illuminated Indicator/ SRS warning light warning light Seat belt reminder light Front passenger airbag Deactivated Side airbag on the front passenger seat Activated Curtain shield airbag in the front Devices passenger side Activated Front passenger’s seat belt pretensioner...
Page 60
1-2. Child safety : The system judges a person of adult size as an adult. When a smaller adult sits in the front passenger seat, the system may recognize him/her as a child depending on his/her physique and posture. : In the event the front passenger is wearing a seat belt. : In the event the front passenger does not wear a seat belt.
Page 61
Do not kick the front passenger seat or subject it to severe impact. Other- wise, the SRS warning light may come on to indicate a malfunction of the front passenger occupant classification system. In this case, contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional immediately. ●...
1-2. Child safety ∗ Airbag manual on-off system This system deactivates the front passenger airbag. Only deactivate the airbag when using a child restraint system on the front passenger seat. “PASSENGER AIR BAG” indi- cator Vehicles without smart entry & start system: The ON indicator light turns on when the airbag system is on (only when the engine switch is...
Page 63
“PASSENGER AIR BAG” indicator lights information If any of the following problems occur, it is possible that there is a malfunction in the system. Have the vehicle inspected by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional.
1-2. Child safety Riding with children Observe the following precautions when children are in the vehi- cle. Use a child restraint system appropriate for the child, until the child becomes large enough to properly wear the vehicle’s seat belt. ● It is recommended that children sit in the rear seats (if equipped) to avoid accidental contact with the shift lever, wiper switch etc.
● The use of a Toyota genuine child restraint system is recom- mended, as it is safer to use in this vehicle. Toyota genuine child restraint systems are made specifically for Toyota vehicles. They can be purchased at a Toyota dealer.
Page 66
● Toyota strongly urges the use of a proper child restraint system that con- forms to the size of the child, installed on the rear seat. According to acci- dent statistics, the child is safer when properly restrained in the rear seat than in the front seat.
1-2. Child safety Child restraint system Install the available child restraint system in vehicle upon confirming the following items. Standards for child restraint systems ■ Use a child restraint system that conforms to ECE R44 1, 2 ECE R129 The following approval mark is displayed on child restraint systems which are conformed.
Page 68
1-2. Child safety Mass group (ECE R44 only) ■ This Mass group table is required when confirming the child restraint system compatibility. Confirm in accordance with the child restraint system compatibility table. (→P. 73, 84). The child restraint system which conforms to the standard of ECE R44 is categorized into 5 groups according to the weight of the child.
Page 69
1-2. Child safety Types of child restraint system installation methods ■ Confirm with the operation manual enclosed with the child restraint system about the instruction of the child restraint system. Installation method Page Seat belt attach- P. 73 ment ISOFIX rigid anchor P.
1-2. Child safety When using a child restraint system WARNING ■ When using a child restraint system Observe the following precautions. Failure to do so may result in death or serious injury. ● Vehicles without front passenger occupant classification system or airbag manual on-off switch: Never use a rear- facing child restraint system on the front passenger seat.
Page 71
1-2. Child safety WARNING Type A Type B...
Page 72
1-2. Child safety WARNING ■ When using a child restraint system ● Vehicles with SRS front passenger air- bag: Only put a forward-facing child restraint system on the front seat when unavoidable. When installing a forward- facing child restraint on the front pas- senger seat, move the seat as far back as possible.
1-2. Child safety Child restraint system fixed with a seat belt ◆ Confirming the possible installation seating positions and the Mass Group for the seat belt installation type child restraint systems. Confirm the corresponding [Mass group] from the weight of the child (→P.
Page 74
Recommended passenger occupant Mass groups Child Restraint classification system Systems Passenger airbag indicator light “TOYOTA G 0+, BABYSAFE Up to 10 kg PLUS” (22 lb.) “TOYOTA MINI” “TOYOTA G 0+, BABYSAFE PLUS with SEAT BELT Up to 13 kg FIXATION, BASE PLATFORM”...
Page 75
Mass groups Child Restraint passenger occupant Rear seat Systems classification system Passenger airbag indicator light “TOYOTA G 0+, BABY Up to 10 kg SAFE PLUS” (22 lb.) “TOYOTA MINI” “TOYOTA G 0+, BABY SAFE PLUS with SEAT Up to 13 kg BELT FIXATION, BASE (28 lb.)
Page 76
1-2. Child safety UF: Suitable for forward-facing “universal” category child restraint sys- tems approved for use in this mass group. Suitable for “specific vehicles”, “restricted”, or “semi-universal”, category child restraint systems approved for use in this mass group. : Adjust the seatback angle to the most upright position. Move the front seat fully rearward.
Page 77
Restraint system Out- Systems Center board Passenger Airbag manual airbag on-off switch indicator light “TOYOTA G Up to 10 kg 0+, BABY (22 lb.) SAFE PLUS” “TOYOTA MINI” “TOYOTA G 0+, BABY SAFE PLUS Up to 13 kg with SEAT (28 lb.)
Page 78
1-2. Child safety Key of letters inserted in the above table: X: Not suitable seat position for children in this mass group. U: Suitable for “universal” category child restraint systems approved for use in this mass group. UF: Suitable for forward-facing “universal” category child restraint sys- tems approved for use in this mass group.
Page 79
1-2. Child safety The child restraint systems mentioned in the table may not be avail- able outside the EU area. ● Double-cab models: When installing a child restraint in the rear seats, adjust the front seat so that it does not interfere with the child or child restraint system.
Page 80
1-2. Child safety ◆ Installing child restraint system using a seat belt Install the child restraint system in accordance to the operation manual enclosed with the child restraint system. Front seat Adjust the seatback angle to the most upright position. Move the front seat fully rearward.
Page 81
If your child restraint system does not provide a locking clip, you can purchase the following item from any authorized Toyota dealer or repairer, or another duly qualified and equipped professional: Locking clip for child restraint system (Part No.
1-2. Child safety Child restraint system fixed with an ISOFIX rigid anchor (if equipped) ISOFIX rigid anchors (ISOFIX child restraint system) ■ Lower anchors are provided for the outboard rear seats. (Tags displaying the location of the anchors are attached to the seats.)
Page 83
1-2. Child safety Confirming the Mass group and Size class for ECE R44 ISOFIX ■ corresponding child restraint systems Confirm the corresponding [Mass group] from the weight of the child (→P. 68) (Ex. 1) When the weight is 12 kg, [Mass group 0+] (Ex.
Page 84
1-2. Child safety Child restraint systems fastened with ISOFIX (ECE R44) - Com- ■ patibility and Recommended child restraint systems table ISOFIX child restraint systems are divided in different “size class”. According to this “size class”, you will be allowed to use it in the vehicle seating position mentioned in the table below.
Page 85
Child Restraint groups Systems Passen- Outboard Center ger seat Carrycot Up to 10 kg (22 lb.) “TOYOTA MINI” “TOYOTA MIDI” Up to 13 kg (28 lb.) “TOYOTA MIDI” 9 to 18 kg (20 to 39 lb.) “TOYOTA DUO+” “TOYOTA MIDI”...
Page 86
● When installing a child restraint in the rear seats, adjust the front seat so that it does not interfere with the child or child restraint sys- tem. ● When using a “TOYOTA MINI” or “TOYOTA MIDI”, adjust the sup- port leg and ISOFIX connectors as follows: Lock the ISOFIX connectors where number 3 can be seen.
Page 87
1-2. Child safety i-Size child restraint systems fastened with ISOFIX ■ (ECE R129) - Compatibility table If your child restraint system is of “i-Size” category, you can install it on the positions mentioned by i-U in the table below. Child restraint system category can be found in the child restraint system manual.
Page 88
1-2. Child safety Installation with ISOFIX rigid anchor (ISOFIX child restraint ■ system) Install the child restraint system in accordance to the operation manual enclosed with the child restraint system. If the head restraint interferes with your child restraint system, and the head restraint can be removed, remove the head restraint.
Page 89
1-2. Child safety ■ When removing the head restraint to install a child restraint system After removing the child restraint system, make sure to reinstall the head restraint. WARNING ■ When installing a child restraint system Observe the following precautions. Failure to do so may result in death or serious injury.
1-2. Child safety Using an anchor bracket (for top strap) (if equipped) Anchor bracket (for top strap) ■ Anchor bracket are provided for the outboard rear seat. Use anchor bracket when fixing the top strap. Anchor bracket Top strap Fixing the top strap to the anchor bracket ■...
Page 91
1-2. Child safety Pull up the anchor strap router. Route the top strap through Anchor strap router the anchor strap router as shown in the illustration. Latch the hook onto the anchor bracket and tighten the top strap. Make sure the top strap is Anchor bracket securely latched.
Page 92
1-2. Child safety WARNING ■ When installing a child restraint system Observe the following precautions. Failure to do so may result in death or serious injury. ● Do not attach the top strap to anything other than the anchor bracket. ●...
1-3. Theft deterrent system ∗ Engine immobilizer system The vehicle’s keys have built-in transponder chips that prevent the engine from starting if a key has not been previously regis- tered in the vehicle’s on-board computer. Never leave the keys inside the vehicle when you leave the vehi- cle.
Page 94
1-3. Theft deterrent system Vehicles with smart entry & start system: The indicator light flashes after the engine switch has been turned off to indicate that the system is operating. The indicator light stops flashing after the engine switch has been turned to ACCESSORY or IGNITION ON mode to indicate that the system has been canceled.
Page 95
1-3. Theft deterrent system ■ Certification for the engine immobilizer system Vehicles without smart entry & start system...
Page 101
1-3. Theft deterrent system NOTICE ■ To ensure the system operates correctly Do not modify or remove the system. If modified or removed, the proper operation of the system cannot be guaranteed.
1-3. Theft deterrent system ∗ Alarm The alarm The alarm uses light and sound to give an alert when an intrusion is detected. The alarm is triggered in the following situations when the alarm is set: Except for Kazakhstan and Morocco ●...
Page 103
1-3. Theft deterrent system Deactivating or stopping the alarm Do one of the following to deactivate or stop the alarms: Except for Kazakhstan and Morocco ● Unlock the doors. ● Start the engine. (The alarm will be deactivated or stopped after a few seconds.) For Kazakhstan and Morocco ●...
Page 104
1-3. Theft deterrent system ■ Triggering of the alarm The alarm may be triggered in the following situations: (Stopping the alarm deactivates the alarm system.) ● For Kazakhstan and Morocco: The doors are unlocked using the key and are opened. ●...
2. Instrument cluster Warning lights and indicators The warning lights and indicators on the instrument cluster and center panel inform the driver of the status of the vehicle’s vari- ous systems. For the purpose of explanation, the following illustrations dis- play all warning lights and indicators illuminated.
Page 107
2. Instrument cluster Vehicles with multi-information display type B Warning lights Warning lights inform the driver of malfunctions in the indicated vehi- cle’s systems. Brake system warning ABS warning light light (→P. 487) (→P. 488) Charging system Slip indicator light warning light (→P.
Page 108
There may be a malfunction in a system if a light does not come on, or if the lights do not turn off. Have the vehicle inspected by any autho- rized Toyota dealer or repairer, or another duly qualified and equipped pro- fessional.
Page 109
2. Instrument cluster Indicators The indicators inform the driver of the operating state of the vehicle’s various systems. Turn signal indicator “SET” indicator (→P. 239) (→P. 257) (if equipped) Headlight high beam “ECO MODE” indicator indicator (→P. 243) (→P. 229, 234) (if equipped) Tail light indicator “PWR MODE”...
Page 110
There may be a malfunction in a system if a light does not come on, or if the lights do not turn off. Have the vehicle inspected by any autho- rized Toyota dealer or repairer, or another duly qualified and equipped pro- fessional.
Page 111
Have the vehicle inspected by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional...
2. Instrument cluster Gauges and meters Vehicles without multi-information display Vehicles with multi-information display type A...
Page 113
2. Instrument cluster Vehicles with multi-information display type B The units used on the speedometer may differ depending on the target region. Tachometer Displays the engine speed in revolutions per minute. Outside temperature Displays the outside temperature. The temperature range that can be dis- played is from -40°C (-40°F) to 50°C (122°F).
Page 114
2. Instrument cluster Shift position and shift range (automatic transmission) Displays the selected shift position or selected shift range. (→P. 227) Engine coolant temperature gauge Displays the engine coolant temperature. Changing the display Vehicles without multi-information display Pressing this button switches between odometer and trip meter dis- plays.
Page 115
■ When “--” is displayed The system may be malfunctioning. Take your vehicle to any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. WARNING ■ The information display at low temperatures (vehicles with multi-infor-...
Page 116
2. Instrument cluster NOTICE ■ To prevent damage to the engine and its components ● Do not let the indicator needle of the tachometer enter the red zone, which indicates the maximum engine speed. ● The engine may be overheating if the engine coolant temperature gauge is in the red zone (H).
2. Instrument cluster ∗ Multi-information display (Type A) Display contents The multi-information display presents the driver with a variety of driv- ing-related data. ● Trip information (→P. 118) Displays driving range, fuel con- sumption other cruising- related information. ● Setting (→P. 564) The settings of the following items can be changed.
2. Instrument cluster Switching the display “DISP” button Items displayed can be switched by pressing the “DISP” button. Trip information Current fuel consumption ■ Displays the current rate of fuel consumption. Average fuel consumption ■ Displays the average fuel consumption since the engine switch is turned to the “ON”...
Page 119
2. Instrument cluster Average vehicle speed ■ Displays the average vehicle speed since the engine switch is turned to the “ON” position (vehicles without smart entry & start sys- tem) or IGNITION ON mode (vehicles with smart entry & start sys- tem).
2. Instrument cluster ∗ Multi-information display (Type B) Display contents The multi-information display presents the driver with a variety of vehi- cle data. The following information will be displayed when a menu icon is selected. (→P. 121) Some of the information may be displayed automatically depend- ing on the situation.
Page 121
2. Instrument cluster Operating the meter control switches The multi-information display is operated using the meter control switches. Enter/Set Select an item/Change pages Return to the previous screen Press: Displays the screen reg- istered as the top screen When no screen has been registered, the drive information screen will be displayed.
Page 122
2. Instrument cluster Drive information Items displayed can be switched by pressing “<” or “>” of the meter control switches to select and pressing “∧” or “∨”. 1, 2 ● Current fuel economy (bar type/value type) Displays the current rate of fuel consumption. 1, 2 ●...
Page 123
2. Instrument cluster ● Idling stop (if equipped) Displays the total idling stop time (engine stop time via the Stop & Start system) after resetting and engine startup. (→P. 284) ● Eco Driving Indicator Zone Display (if equipped) Displays Zone of Eco driving with current Eco driving ratio based on acceleration.
Page 124
2. Instrument cluster Settings display The settings of the following items can be changed, refer to P. 563 ● Language Select to change the language on the display. ● Units Select to change the unit for measure of the fuel consumption. ●...
Page 125
2. Instrument cluster ■ Pop-up display In some situations, such as when a switch operation is performed, a pop-up display will be temporarily displayed on the multi-information display. The pop-up display function can be set on/off. (→P. 565) ■ Eco Score (if equipped) Driving conditions are displayed in 5 stages and divided into 3 categories: start, cruise and stop.
Page 126
2. Instrument cluster ■ Eco Saving (if equipped) Displays the fuel consumption comparison, the average fuel consumption after reset, and the cost of the consumed fuel. Fuel consumption comparison Displays the set fuel consumption that is compared with the actual fuel con- sumption.
Page 127
2. Instrument cluster WARNING ■ Eco Score Use the Eco Score as a reference. Always drive safely in accordance with road and traffic conditions.
2. Instrument cluster ∗ Fuel consumption information The fuel consumption information can be displayed on the navi- gation system or multimedia system screen. Display the trip information or past record screen Press the “CAR” button. Select “Trip information” or “Past record”. Fuel consumption Trip information ■...
Page 129
2. Instrument cluster Past record ■ If the past record screen does not appear, select “Past record”. Best recorded fuel consump- tion Previous fuel consumption record Current fuel consumption Reset the past record data Update the past record data “Trip information”...
Operation of each component 3-1. Key information Keys........132 3-2. Opening, closing and locking the doors Side doors......144 Access panels (smart-cab models only) ....150 Tailgate ......151 Smart entry & start system ......154 3-3. Adjusting the seats Front seats......170 Rear seats ......172 Head restraints ....175 3-4.
3-1. Key information Keys The keys The following keys are provided with the vehicle. Type A Master keys Valet key Key number plate Type B Master keys Valet key Key number plate Type C Master keys Operating the wireless remote con- trol function (→P.
Page 133
3-1. Key information Type D Master keys Operating the wireless remote con- trol function (→P. 134) Valet key Key number plate Type E (vehicles with smart entry & start system) Electronic keys • Operating the smart entry & start system (→P. 154) •...
Page 134
3-1. Key information Wireless remote control (if equipped) Vehicles without smart entry & start system Locks all the doors (→P. 144) Check that the door is securely locked. Unlocks all the doors (→P. 144) Sounds the alarm (→P. 135) : If equipped Vehicles with smart entry &...
Page 135
3-1. Key information Using the mechanical key (vehicles with smart entry & start sys- tem) To take out the mechanical key, slide the release lever and take the key out. The mechanical key can only be inserted in one direction, as the key only has grooves on one side.
Page 136
■ If you lose your keys New genuine keys can be made by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional using a master key (vehi- cles without smart entry & start system) or the other key of the same type (vehicles with smart entry &...
Page 137
3-1. Key information ■ Certification for wireless remote control...
Page 142
3-1. Key information For vehicles sold in Serbia...
Page 143
If the electronic key remains lost, the risk of vehicle theft increases signifi- cantly. Visit any authorized Toyota dealer or repairer, or another duly quali- fied and equipped professional immediately with all remaining electronic keys that were provided with your vehicle.
3-2. Opening, closing and locking the doors Side doors The vehicle can be locked and unlocked using the entry func- tion, wireless remote control, key or door lock switch. Locking and unlocking the doors from outside ◆ Smart entry & start system (if equipped) While carrying the electronic key, press the button to lock and unlock.
Page 145
3-2. Opening, closing and locking the doors ◆ Vehicles without smart entry & start system Vehicles without power door lock system: Locks the door Unlocks the door Vehicles with power door lock system: Locks all the doors Unlocks all the doors Vehicles with smart entry &...
Page 146
3-2. Opening, closing and locking the doors ■ Setting the alarm (if equipped) Locking the doors will set the alarm system. (→P. 102) ■ If a symbol indicating one or more doors are open is shown on the multi- information display (if equipped) One or more of the doors is not fully closed.
Page 147
3-2. Opening, closing and locking the doors Locking the front doors from the outside without a key Move the inside lock button to the lock position. Close the door while pulling the door handle. Vehicles without smart entry & start system (vehicles with power door lock system): The driver’s door cannot be locked if either of the door is open and the key is in the engine switch.
Page 148
3-2. Opening, closing and locking the doors Setting and canceling the functions ■ To switch between setting and canceling, follow the procedure below. Close all the doors and turn the engine switch to IGNITION ON mode (vehicles with smart entry & start system) or the “ON” posi- tion (vehicles without smart entry &...
Page 149
3-2. Opening, closing and locking the doors ■ Conditions affecting operation Vehicles without smart entry & start system The wireless remote control function may not operate normally in the follow- ing situations: ● Near a TV tower, radio station, electric power plant, airport or other facility that generates strong radio waves ●...
3-2. Opening, closing and locking the doors Access panels (smart-cab models only) The access panels (rear door) can be opened using the inside handle. Open the front door widely. Pull (from the outside) or push (from the inside) the inside han- dle of the access panels.
3-2. Opening, closing and locking the doors ∗ Tailgate The tailgate can be locked/unlocked and opened by the follow- ing procedures. Locking and unlocking the tailgate (vehicles with key hole) Lock with the master key or the mechanical key Unlock with the master key or the mechanical key Opening the tailgate Type A...
Page 152
3-2. Opening, closing and locking the doors Type B Pull the handle and open the tail- gate slowly. The support stays will hold the tail- gate horizontal. After closing the tailgate, try pulling it toward you to make sure it is securely locked.
Page 153
3-2. Opening, closing and locking the doors WARNING ■ Caution while driving Observe the following precautions. Failure to do so may result in death or serious injury. ● Do not drive with the tailgate open. ● Do not get on the rear step bumper. NOTICE ■...
3-2. Opening, closing and locking the doors ∗ Smart entry & start system The following operations can be performed simply by carrying the electronic key on your person, for example in your pocket. The driver should always carry the electronic key. ●...
Page 155
3-2. Opening, closing and locking the doors ■ Effective range (areas within which the electronic key is detected) When locking or unlocking the doors The system can be operated when the electronic key is within about 0.7 m (2.3 ft.) of either of the lock/unlock button on the outside door handle.
Page 156
3-2. Opening, closing and locking the doors ■ Alarms and warning indicators A combination of exterior and interior alarms as well as warning messages shown on the multi-information display are used to prevent theft of the vehicle and accidents resulting from erroneous operation. Take appropriate mea- sures in response to any warning message on the multi-information display.
Page 157
3-2. Opening, closing and locking the doors ■ Conditions affecting operation The smart entry & start system uses weak radio waves. In the following situa- tions, the communication between the electronic key and the vehicle may be affected, preventing the smart entry & start system, wireless remote control and engine immobilizer system from operating properly.
Page 158
To prevent theft of the vehicle, do not leave the electronic key within 2 m (6 ft.) of the vehicle. ● The smart entry & start system can be deactivated in advance. Ask any authorized Toyota dealer or repairer, or another duly qualified and equipped professional for details. ■ To operate the system properly Make sure to carry the electronic key when operating the system.
Page 159
Retrieve the electronic key from the vehicle and lock the doors again. ■ Customization that can be configured at any authorized Toyota dealer or repairer, or another duly qualified and equipped professional Settings (e.g. smart entry & start system) can be changed.
Page 160
3-2. Opening, closing and locking the doors ■ Certification for smart entry & start system...
Page 161
3-2. Opening, closing and locking the doors...
Page 162
3-2. Opening, closing and locking the doors...
Page 163
3-2. Opening, closing and locking the doors...
Page 164
3-2. Opening, closing and locking the doors...
Page 165
3-2. Opening, closing and locking the doors...
Page 166
3-2. Opening, closing and locking the doors...
Page 167
3-2. Opening, closing and locking the doors...
Page 168
3-2. Opening, closing and locking the doors...
Page 169
(→P. 154) The radio waves may affect the operation of such devices. If necessary, the entry function can be disabled. Ask any authorized Toyota dealer or repairer, or another duly qualified and equipped professional for details, such as the frequency of radio waves and timing of the emitting radio waves.
3-3. Adjusting the seats Front seats Adjustment procedure Manual seat (separated type) Seat position adjustment lever Seatback angle adjustment lever Vertical height adjustment lever (if equipped for driver’s seat only) Manual seat (bench type) Seat position adjustment lever (driver’s seat only) Seatback angle adjustment...
Page 171
3-3. Adjusting the seats Power seat (driver’s seat only) Seat position adjustment switch Seatback angle adjustment switch Seat cushion (front) angle adjustment switch Vertical height adjustment switch WARNING ■ When adjusting the seat position ● Take care when adjusting the seat position to ensure that other passen- gers are not injured by the moving seat.
3-3. Adjusting the seats ∗ Rear seats Removing the rear seat cushions (if equipped for smart-cab models) Unhook the lock release lever. Pull the seat cushions up and then pull toward the front of vehicle. The seat cushions can be removed separately.
Page 173
3-3. Adjusting the seats Anchor the strap to the head restraint. Type B Pull the head restraints up. Pull the straps and raise the bottom cushions. The latch under the bottom cush- ions will release allowing the bot- tom cushions to be raised.
Page 174
3-3. Adjusting the seats Anchor the straps to the head restraints. WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ■ When removing the rear seat cushions ● Do not remove the rear seat cushions while driving. ●...
3-3. Adjusting the seats Head restraints Front seats Adjustable type Pull the head restraints up. Down Push the head restraint down while pressing the lock release button. Lock release button Integrated type Head restraints cannot be adjusted and removed. Rear seats (if equipped) Adjustable type Pull the head restraints up.
Page 176
3-3. Adjusting the seats ■ Removing the head restraints Pull the head restraint up while pressing the lock release button. Lock release button ■ Installing the head restraints Align the head restraint with the installa- tion holes and push it down to the lock position.
Page 177
3-3. Adjusting the seats WARNING ■ Head restraint precautions Observe the following precautions regarding the head restraints. Failure to do so may result in death or serious injury. ● Use the head restraints designed for each respective seat. ● Adjust the head restraints to the correct position at all times. ●...
3-4. Adjusting the steering wheel and mirrors Steering wheel Adjustment procedure Hold the steering wheel and push the lever down. Type A Adjust to the ideal position by moving the steering wheel verti- cally. After adjustment, pull the lever up to secure the steering wheel.
Page 179
3-4. Adjusting the steering wheel and mirrors Horn To sound the horn, press on or close to the mark. ■ After adjusting the steering wheel Make sure that the steering wheel is securely locked. The horn may not sound if the steering wheel is not securely locked. WARNING ■...
3-4. Adjusting the steering wheel and mirrors Inside rear view mirror The rear view mirror’s position can be adjusted to enable suffi- cient confirmation of the rear view. Adjusting the height of rear view mirror The height of the rear view mirror can be adjusted to suit your driving posture.
3-4. Adjusting the steering wheel and mirrors Outside rear view mirrors Adjustment procedure Manual adjustable type Adjust a mirror. Power adjustable type To select a mirror to adjust, turn the switch. Left Right To adjust the mirror, move the switch. Right Down Left...
Page 182
3-4. Adjusting the steering wheel and mirrors Folding the mirrors Manual folding type Push the mirror back in the direc- tion of the vehicle’s rear. Power folding type Press the switch. Folding Extending ■ Mirror angle can be adjusted when (power adjustable type) Vehicles without smart entry &...
Page 183
3-4. Adjusting the steering wheel and mirrors WARNING ■ Important points while driving Observe the following precautions while driving. Failure to do so may result in loss of control of the vehicle and cause an accident, resulting in death or serious injury. ●...
3-5. Opening and closing the windows ∗ Power windows Opening and closing procedures The power windows can be opened and closed using the switches. Operating the switch moves the windows as follows: Type A Closing Opening One-touch opening (driver’s window only) : To stop the window partway, operate the switch in the opposite direction.
Page 185
3-5. Opening and closing the windows Type C Closing Opening One-touch opening One-touch closing : To stop the window partway, operate the switch in the opposite direction. Window lock switch Press the switch down to lock the passenger window switches. Use this switch to prevent children from accidentally opening or clos- ing a passenger window.
Page 186
If you release the switch while the window is moving, start again from the beginning. If the window movement reverses and can not be closed or completely open, have the vehicle inspected by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional.
Page 187
3-5. Opening and closing the windows WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ■ Closing the windows ● The driver is responsible for all the power window operations, including the operation for the passengers. In order to prevent accidental operation, especially by a child, do not let a child operate the power windows.
3-5. Opening and closing the windows Quarter windows (smart-cab models) Opening and closing procedures The quarter windows can be opened and closed using the latch han- dle. To open the quarter windows, pull the latch handle toward you and swing it fully out. To close the quarter windows, reverse the opening procedure.
3-5. Opening and closing the windows Back window (sliding type) Opening and closing procedures The back window can be opened and closed using the lock release lever. To open the back window, push the lock release lever and slide the back window. To close the back window, reverse the opening procedure.
Driving 4-1. Before driving 4-3. Operating the lights and wipers Driving the vehicle .....192 Headlight switch....241 Cargo and luggage ....204 Fog light switch ....247 Trailer towing (except models for model code Windshield wipers and destination W)....205 washer ......249 Trailer towing (models for 4-4.
4-1. Before driving Driving the vehicle The following procedures should be observed to ensure safe driving: Starting the engine →P. 215, 219 Driving Automatic transmission With the brake pedal depressed, shift the shift lever to D. (→P. 227) Release the parking brake. (→P. 240) Gradually release the brake pedal and gently depress the accelera- tor pedal to accelerate the vehicle.
Page 193
4-1. Before driving Stopping Automatic transmission With the shift lever in D, depress the brake pedal. If necessary, set the parking brake. If the vehicle is to be stopped for an extended period of time, shift the shift lever to P or N. (→P. 227) Manual transmission While depressing the clutch pedal, depress the brake pedal.
Page 194
4-1. Before driving Manual transmission While depressing the clutch pedal, depress the brake pedal. Shift the shift lever to N. (→P. 233) Set the parking brake. (→P. 240) If parking on a hill, shift the shift lever to 1 or R as needed. Vehicles without smart entry &...
Page 195
● Vehicles with multi-information display: A warning message is displayed on the multi-information display while the system is operating. ■ Breaking in your new Toyota To extend the life of the vehicle, observing the following precautions is recom- mended: ●...
Page 196
4-1. Before driving ■ Idling time before stopping the engine (diesel engine only) To prevent damage to the turbocharger, allow the engine to idle immediately after high-speed driving or driving up a hill. Driving condition Idling time Normal city driving Not necessary Constant speed of approx.
Page 197
4-1. Before driving WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ■ When driving the vehicle ● During normal driving, do not turn off the engine. Turning the engine off while driving will not cause loss of steering or braking control, but the power assist to these systems will be lost.
Page 198
■ If you hear a squealing or scraping noise (brake pad wear indicators) Have the brake pads checked and replaced by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional as soon as possible.
Page 199
4-1. Before driving WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ■ When the vehicle is stopped ● Do not race the engine. If the vehicle is in any gear other than P (vehicles with automatic transmis- sion only) or N, the vehicle may accelerate suddenly and unexpectedly, causing an accident.
Page 200
4-1. Before driving WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ■ When the vehicle is parked ● Always apply the parking brake, shift the shift lever to P (vehicles with automatic transmission only), stop the engine and lock the vehicle. Do not leave the vehicle unattended while the engine is running.
Page 201
Have any authorized Toyota dealer or repairer, or another duly qualified and equipped professional inspect the vehicle as soon as...
Page 202
4-1. Before driving NOTICE ■ When parking the vehicle On vehicles with automatic transmission, always shift the shift lever to P. Failure to do so may cause the vehicle to move or the vehicle may acceler- ate suddenly if the accelerator pedal is accidentally depressed. ■...
Page 203
Engine damage caused by water immersion In the event that you drive on a flooded road and the vehicle is flooded, be sure to have any authorized Toyota dealer or repairer, or another duly quali- fied and equipped professional check the following: ●...
4-1. Before driving Cargo and luggage Take notice of the following information about storage precau- tions, cargo capacity and load. WARNING ■ Things that must not be carried in the rear deck The following things may cause a fire if loaded in the rear deck: ●...
W Toyota does not recommend towing a trailer with your vehicle. Toyota also does not recommend the installation of a tow hitch or the use of a tow hitch carrier for a wheelchair, scooter, bicy- cle, etc. Your vehicle is not designed for trailer towing or for the use of tow hitch mounted carriers.
Toyota warranties do not apply to damage or malfunction caused by towing a trailer for commercial purposes. Ask your local authorized Toyota dealer or repairer, or another duly qualified and equipped professional for further details before towing, as there are additional legal requirements in some countries.
Page 207
4-1. Before driving Important points regarding trailer loads Total trailer weight and permissible drawbar load ■ Total trailer weight Weight of the trailer itself plus the trailer load should be within the maximum towing capacity. Exceeding this weight is danger- ous.
Page 208
4-1. Before driving Information tag (manufacturer’s label) ■ Gross vehicle mass The combined weight of the driver, passengers, cargo, towing hitch, total curb mass and drawbar load must not exceed the gross vehicle mass. Exceeding this weight is dangerous. Maximum permissible rear axle capacity The weight borne by the rear axle should not exceed the maxi- mum permissible rear axle capacity.
Page 209
4-1. Before driving Installation positions for the towing hitch/bracket and hitch ball 570 mm (22.4 in.) 570 mm (22.4 in.) 178 mm (7.0 in.) 373 mm (14.7 in.) 183 mm (7.2 in.) 427 mm (16.8 in.) 183 mm (7.2 in.) 576 mm (22.7 in.) 193 mm (7.6 in.) 641 mm (25.2 in.)
Page 210
■ Break-in schedule Toyota recommends that vehicles fitted with new power train components should not be used for towing trailers for the first 800 km (500 miles). ■ Safety checks before towing ●...
Page 211
4-1. Before driving ■ If trailer sway occurs One or more factors (crosswinds, passing vehicles, rough roads, etc.) can adversely affect handling of your vehicle and trailer, causing instability. ● If trailer swaying occurs: • Firmly grip the steering wheel. Steer straight ahead. Do not try to control trailer swaying by turning the steering wheel.
Page 212
4-1. Before driving Guidance Your vehicle will handle differently when towing a trailer. In order to avoid accident death or serious injury, keep the following in mind when towing: Checking connections between trailer and lights ■ Stop the vehicle and check the operation of the connection between the trailer and lights after driving for a brief period as well as before starting off.
Page 213
4-1. Before driving Important points regarding stability ■ Vehicle movement resulting from uneven road surfaces and strong crosswinds will affect handling. The vehicle may also be rocked by passing buses or large trucks. Frequently check behind when mov- ing alongside such vehicles. As soon as such vehicle movement occurs, immediately start to decelerate smoothly by slowly applying the brakes.
Page 214
5850 kg (12897 lb.): Except Pre Runner for EURO V models for Turkey : EURO V is an emission standard. If it is not clear that your vehicle meets relevant standards, contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. ●...
4-2. Driving procedures Engine (ignition) switch (vehicles without smart entry & start system) Starting the engine Automatic transmission (gasoline engine) Check that the parking brake is set. Check that the shift lever is set in P. Firmly depress the brake pedal. Turn the engine switch to the “START”...
Page 216
4-2. Driving procedures Manual transmission (diesel engine) Check that the parking brake is set. Check that the shift lever is set in N. Firmly depress the clutch pedal. Turn the engine switch to the “ON” position. indicator turns on. After the indicator light goes out, turn the engine switch to the “START”...
Page 217
■ If the engine does not start (vehicles with engine immobilizer system) The engine immobilizer system may not have been deactivated. (→P. 93) Contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. ■ When the steering lock cannot be released When starting the engine, the engine switch may seem stuck in the “LOCK”...
Page 218
● Do not race a cold engine. ● If the engine becomes difficult to start or stalls frequently, have your vehi- cle checked by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional immediately.
4-2. Driving procedures Engine (ignition) switch (vehicles with smart entry & start system) Performing the following operations when carrying the elec- tronic key on your person starts the engine or changes engine switch modes. Starting the engine Automatic transmission Check that the parking brake is set. Check that the shift lever is set in P.
Page 220
4-2. Driving procedures Manual transmission Check that the parking brake is set. Check that the shift lever is set in N. Firmly depress the clutch pedal. A message will be displayed on the multi-information display. If it is not displayed, the engine cannot be started.
Page 221
4-2. Driving procedures Stopping the engine Automatic transmission Stop the vehicle. Shift the shift lever to P. Set the parking brake. (→P. 240) Press the engine switch. Release the brake pedal and check that the display on the instru- ment cluster is off. Manual transmission Stop the vehicle.
Page 222
4-2. Driving procedures Changing engine switch modes Modes can be changed by pressing the engine switch with brake pedal (vehicles with automatic transmission) or clutch pedal (vehicles with manual transmission) released. (The mode changes each time the switch is pressed.) The emergency flashers can be used.
Page 223
■ Note for the entry function →P. 158 ■ If the engine does not start The engine immobilizer system may not have been deactivated. (→P. 93) Contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional.
Page 224
MANUAL”/“Smart Entry & Start System malfunction See owner’s man- ual” is shown on the multi-information display (if equipped) The system may be malfunctioning. Have the vehicle inspected by any autho- rized Toyota dealer or repairer, or another duly qualified and equipped profes- sional immediately. ■...
Page 225
4-2. Driving procedures WARNING ■ When starting the engine Always start the engine while sitting in the driver’s seat. Do not depress the accelerator pedal while starting the engine under any circumstances. Doing so may cause an accident resulting in death or serious injury. ■...
Page 226
Do not race a cold engine. ● If the engine becomes difficult to start or stalls frequently, have your vehi- cle checked by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional immediately. ■ Symptoms indicating a malfunction with the engine switch If the engine switch seems to be operating somewhat differently than usual, such as the switch sticking slightly, there may be a malfunction.
4-2. Driving procedures ∗ Automatic transmission Select a shift position appropriate for the driving conditions. Shifting the shift lever Vehicles without smart entry & start system While the engine switch is in the “ON” position, move the shift lever with the brake pedal depressed. When shifting the shift lever between P and D, make sure that the vehicle is completely stopped.
Page 228
4-2. Driving procedures Shift position purpose Shift position Function Parking the vehicle/starting the engine Reversing Neutral (Condition in which the power is not transmitted) Normal driving S mode driving (→P. 230) : To improve fuel efficiency and reduce noises, set the shift lever in the D position for normal driving.
Page 229
4-2. Driving procedures Selecting the driving mode The following modes can be selected to suit driving conditions. Eco drive mode ■ Use Eco drive mode to help achieve low fuel consumption during trips that involve frequent accelerating. Press the “ECO MODE” switch to select Eco drive mode.
Page 230
4-2. Driving procedures Selecting shift ranges in the S position To enter S mode, shift the shift lever to S. Shift ranges can be selected by operating the shift lever, allowing you to drive in the shift range of your choosing. The shift range can be selected by the shift lever. Upshifting Downshifting The selected shift range, from 1 to...
Page 231
If the “S” indicator does not come on or the “D” indicator is displayed even after shifting the shift lever to S This may indicate a malfunction in the automatic transmission system. Have the vehicle inspected by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional immediately. ■...
Page 232
When the warning message goes out, the vehicle can be driven again. If the warning message does not go out after waiting a while, have your vehi- cle inspected by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional.
4-2. Driving procedures ∗ Manual transmission Shifting the shift lever 5-speed transmission Fully depress the clutch pedal before operating the shift lever, and then release it slowly. If it is difficult to shift in reverse, shift the shift lever to N, release the clutch pedal momentarily, and then try again.
Page 234
4-2. Driving procedures Selecting the driving mode (if equipped) The following modes can be selected to suit driving conditions. Eco drive mode ■ Use Eco drive mode to help achieve low fuel consumption during trips that involve frequent accelerating. Press the “ECO MODE” switch to select Eco drive mode.
Page 235
4-2. Driving procedures ■ Maximum downshifting speeds Observe the downshifting speeds in the following table to prevent over-rev- ving the engine. 5-speed transmission 4WD models (front-wheel drive control switch in H2 or H4): km/h (mph) Maximum speed Shift position 225/70R17C tires 38 (23) 71 (44) 114 (70)
Page 236
4-2. Driving procedures 6-speed transmission 4WD models (front-wheel drive control switch in H2 or H4): km/h (mph) Maximum speed Shift position 205R16C 34 (21) 67 (41) tires (70) (101) (105) 225/70R17C 2GD-FTV 35 (21) 69 (42) tires (72) (103) (105) engine 265/65R17, 265/60R18...
Page 237
4-2. Driving procedures 4WD models (front-wheel drive control switch in L4): km/h (mph) Maximum speed Shift position 205R16C 13 (8) 26 (16) 44 (27) 64 (39) 82 (50) tires 225/70R17C 14 (8) 27 (16) 45 (27) 65 (40) 84 (52) tires 2GD-FTV engine...
Page 238
4-2. Driving procedures ■ Operation of the air conditioning system in Eco drive mode (vehicles with automatic air conditioning system) Eco drive mode controls the heating/cooling operations and fan speed of the air conditioning system to enhance fuel efficiency (→P. 395). To improve air conditioning performance, adjust the fan speed or turn off Eco drive mode.
4-2. Driving procedures Turn signal lever Operating instructions Right turn Left turn Lane change to the right (push and hold the lever partway) The right hand signals will flash until you release the lever. Lane change to the left (push and hold the lever partway) The left hand signals will flash until you release the lever.
4-2. Driving procedures Parking brake Sets the parking brake Fully pull the parking brake while depressing the brake pedal. At this time, the parking brake indi- cator light will come on. Releases the parking brake Slightly raise the lever and lower it completely while pressing the but- ton.
4-3. Operating the lights and wipers Headlight switch The headlights can be operated manually or automatically. Operating instructions Turning the end of the lever turns on the lights as follows: Type A The headlights, front posi- tion, tail, license plate, instrument panel daytime running lights (if...
Page 242
4-3. Operating the lights and wipers Type B Vehicles without day- time running light sys- tem: Off. Vehicles with daytime running light system: daytime running lights turn on. (→P. 244) The headlights, front posi- tion, tail, license plate, (if equipped) instrument panel daytime running lights (if...
Page 243
4-3. Operating the lights and wipers Turning on the high beam headlights With the headlights on, push the lever away from you to turn on the high beams. Pull the lever toward you to the center position to turn the high beams off.
Page 244
4-3. Operating the lights and wipers Follow me home system (if equipped) This system allows the headlights and front position lights to be turned on for 30 seconds when the engine switch is turned to the “LOCK” position (vehicles without smart entry & start system) or off (vehicles with smart entry &...
Page 245
4-3. Operating the lights and wipers ■ Automatic light off system (if equipped) Models for model code destination V and Blank (except for Kazakhstan, Morocco and Egypt) The lights turn off after the engine switch is turned to the “LOCK” position (vehicles without smart entry &...
Page 246
4-3. Operating the lights and wipers ■ Battery-saving function Models for model code destination V and Blank (except for Kazakhstan, Morocco and Egypt) In order to prevent the battery of the vehicle from discharging, if the head- lights and/or tail lights are on when the engine switch is turned to the “LOCK” position (vehicles without smart entry &...
4-3. Operating the lights and wipers ∗ Fog light switch The fog lights secure excellent visibility in difficult driving con- ditions, such as in rain and fog. Front fog light switch (if equipped) ■ Turns the front fog lights Turns the front fog lights ∗...
Page 248
4-3. Operating the lights and wipers Rear fog light switch (if equipped) ■ Turns the rear fog light on Releasing switch ring returns it to Operating the switch ring again turns the rear fog light off. Front and rear fog light switch (if equipped) ■...
4-3. Operating the lights and wipers Windshield wipers and washer Operating the wiper lever The wiper operation is selected by moving the lever as follows. Windshield wipers without intermittent operation ■ Low speed operation High speed operation Temporary operation Washer operation...
Page 250
4-3. Operating the lights and wipers Windshield wipers with intermittent operation ■ Intermittent operation Low speed operation High speed operation Temporary operation If equipped, wiper intervals can be adjusted when intermittent oper- ation is selected. Increases intermittent windshield wiper frequency Decreases the intermittent windshield wiper frequency...
Page 251
■ When a nozzle becomes blocked In this case, contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. Do not try to clear it with a pin or other object. The nozzle will be damaged.
■ Use of ethanol blended gasoline in a gasoline engine Toyota allows the use of ethanol blended gasoline where the ethanol content is up to 10%. Make sure that the ethanol blended gasoline to be used has a Research Octane Number that follows the above.
Page 253
4-4. Refueling WARNING ■ When refueling the vehicle Observe the following precautions while refueling the vehicle. Failure to do so may result in death or serious injury. ● After exiting the vehicle and before opening the fuel cap, touch an unpainted metal surface to discharge any static electricity.
4-4. Refueling NOTICE ■ Refueling ● Do not spill fuel during refueling. Doing so may damage the vehicle, such as causing the emission control system to operate abnormally or damaging fuel system components or the vehicle’s painted surface. ● Vehicles with DPF system: Use the specified fuel.
Page 255
4-4. Refueling Type B ■ To unlock the fuel tank cap, insert the key and turn it counterclockwise. Turn the fuel tank cap slowly to open. Make sure not to hold and turn the key. Closing the fuel tank cap Type A ■...
Page 256
WARNING ■ When replacing the fuel tank cap Do not use anything but a genuine Toyota fuel tank cap designed for your vehicle. Doing so may cause a fire or other incident which may result in death or serious injury.
4-5. Using the driving support systems ∗ Cruise control Summary of functions Use the cruise control to maintain a set speed without depressing the accelerator pedal. Indicators Cruise control switch Setting the vehicle speed Press the “ON-OFF” button to activate the cruise control. Cruise control indicator will come Press the button again to deacti- vate the cruise control.
Page 258
4-5. Using the driving support systems Adjusting the set speed To change the set speed, operate the lever until the desired set speed is obtained. Increases the speed Decreases the speed Fine adjustment: Momentarily move the lever in the desired direc- tion.
Page 259
If the cruise control speed cannot be set or if the cruise control cancels imme- diately after being activated, there may be a malfunction in the cruise control system. Have the vehicle inspected by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional.
Page 260
4-5. Using the driving support systems WARNING ■ To avoid operating the cruise control by mistake Switch the cruise control off using the “ON-OFF” button when not in use. ■ Situations unsuitable for cruise control Do not use cruise control in any of the following situations. Doing so may result in loss of control and could cause an accident resulting in death or serious injury.
4-5. Using the driving support systems ∗ Rear view monitor system The rear view monitor system assists the driver by displaying an image of the view behind the vehicle with fixed guide lines while backing up, for example while parking. The screen illustrations used in this text are intended as examples, and may differ from the image that is actually displayed on the screen.
Page 262
4-5. Using the driving support systems Using the rear view monitor system Screen description ■ Vehicles without smart entry & start system The rear view monitor system screen will be displayed if the shift lever is shifted to R while the engine switch is in the “ON” position. Vehicles with smart entry &...
Page 263
4-5. Using the driving support systems Rear view monitor system precautions Area displayed on screen ■ The rear view monitor system displays an image of the view from the bumper of the rear area of the vehicle. The image on the rear view monitor system screen can be adjusted, refer to the “Naviga- tion and multimedia system...
Page 264
4-5. Using the driving support systems Rear view monitor system camera ■ The camera for the rear view monitor system is located on the tail- gate. Type A Type B ● Using the camera If dirt or foreign matter (such as water droplets, snow, mud etc.) is adhering to the camera, it cannot transmit a clear image.
Page 265
4-5. Using the driving support systems ● When the ground behind the vehicle slopes up sharply The distance guide lines will appear to be closer to the vehicle than the actual dis- tance. Because this, objects will appear to be fur- ther away than they actually are.
Page 266
4-5. Using the driving support systems ● When any part of the vehicle sags When any part of the vehicle sags due to the number of passengers or the distribu- tion of the load, there is a margin of error between the fixed guide lines on the screen and the actual dis- A margin of error...
Page 267
4-5. Using the driving support systems ● Distance guide lines Visually check the surround- ings and the area behind the vehicle. On the screen, it appears that a truck is park- ing at point . However, in reality if you back up to point , you will hit the truck.
Page 268
If you notice any of the following symptoms, refer to the likely cause and the solution, and re-check. If the symptom is not resolved by the solution, have the vehicle inspected by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. Likely cause...
Page 269
4-5. Using the driving support systems Likely cause Solution The image is out of alignment Have the vehicle inspected by any The camera or surrounding area has authorized Toyota dealer or repairer, received a strong impact. another duly qualified equipped professional.
Page 270
4-5. Using the driving support systems WARNING ■ When using the rear view monitor system The rear view monitor system is a supplemental device intended to assist the driver when backing up. When backing up, be sure to visually check all around the vehicle both directly and using the mirrors before proceeding.
Page 271
● Do not expose the camera to strong impact as this could cause a malfunc- tion. If this happens, have the vehicle inspected by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional as soon as possible.
4-5. Using the driving support systems ∗ Four-wheel drive system Use the front-wheel drive control switch to select the following transfer modes. H2 (high speed position, two- wheel drive) Use this for normal driving on dry - surfaced roads. This position hard gives greater economy, quietest ride and least wear.
Page 273
4-5. Using the driving support systems Shifting between H2 and H4 Shifting from H2 to H4 ■ Reduce your speed to less than 100 km/h (62 mph). Turn the front-wheel drive control switch to H4. The four-wheel drive indicator light will come on. Shifting from H4 to H2 ■...
Page 274
4-5. Using the driving support systems Shifting from L4 to H4 ■ Stop the vehicle or reduce your speed to less than 3 km/h (2 mph). With your foot off the accelerator pedal, depress the clutch pedal. Turn the front-wheel drive control switch to H4. The low speed four-wheel drive indicator light will go off.
Page 275
4-5. Using the driving support systems WARNING ■ While driving ● Never turn the front-wheel drive control switch from H2 to H4 if the wheels are slipping. Stop the slipping or spinning before shifting. ● For normal driving on dry and hard surface roads, use H2 position. Driving on dry and hard surface roads in H4 or L4 position may cause drive com- ponent oil leakage, seizure, or other problems resulting in an accident.
4-5. Using the driving support systems ∗ Rear differential lock system The rear differential lock system is provided for use only when wheel spinning occurs in a ditch or on a slippery or ragged sur- face. This differential lock system is effective in case one of the rear wheels is spinning.
Page 277
4-5. Using the driving support systems Using the rear differential lock system Automatic transmission 4WD models only: Before using the rear differential lock system, try turning the front-wheel drive control switch to L4. If this is not suffi- cient, use the rear differential lock system as well. Be sure to stop the wheels.
Page 278
4-5. Using the driving support systems ■ Locking the rear differential The following systems do not operate when the rear differential is locked. It is normal operation for the ABS warning light, VSC OFF indicator (if equipped) and “TRC OFF” indicator (if equipped) to be on or for “TRC TURNED OFF”/“TRC turned off”...
4-5. Using the driving support systems ∗ Stop & Start system (Smart Stop) The Stop & Start system stops and restarts the engine according to the brake pedal operation (automatic transmission) or clutch pedal operation (manual transmission) for stopping and starting the vehicle.
Page 280
4-5. Using the driving support systems Disabling the Stop & Start system Press the Stop & Start cancel switch to disable the Stop & Start system. The Stop & Start cancel indicator will come on. Pressing the switch again to re- enable the Stop &...
Page 281
4-5. Using the driving support systems Hill-start assist control After the engine is stopped by the Stop & Start system when the vehi- cle is on an incline, brake force is temporarily maintained to prevent rolling backwards until the engine is restarted and drive force is gener- ated.
Page 282
4-5. Using the driving support systems • When the steering wheel is being operated • Due to traffic or other circumstances the vehicle is stopped repeatedly, resulting in the amount of time the engine is stopped by the Stop & Start system to become excessively high.
Page 283
● Installation and removal of electrical components and wireless devices may affect the Stop & Start system, contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. ■ If the windshield is fogged up while the engine is stopped by the Stop &...
Page 284
4-5. Using the driving support systems ■ Air conditioning system while the engine is stopped by the Stop & Start system While the engine is stopped by the Stop & Start system, the air conditioning system (cooling, heating and dehumidifying functions) is cancelled and it only blows air or stops blowing air.
Page 285
4-5. Using the driving support systems ■ Replacing battery →P. 526 ■ Displaying the Stop & Start system status Operation status of the Stop & Start system can be displayed on the (Drive information) screen of multi-information display. (→P. 123) Displays the current engine stop time.
Page 286
A non-dedicated battery for the Stop & Start system may have been installed. → The Stop & Start system does not “Non-dedicated operate. Have the vehicle inspected by battery” authorized Toyota dealer repairer, or another duly qualified and equipped professional.
Page 287
4-5. Using the driving support systems ● When the engine automatically restarts while stopped by the Stop & Start system Message Details/Actions Vehicles with automatic air conditioning sys- tem: “For climate • The air conditioning system is turned on or control”...
Page 288
If “Stop & Start system malfunction Visit your dealer” is shown on the multi-information display (if equipped) The system may be malfunctioning. Have the vehicle inspected by any autho- rized Toyota dealer or repairer, or another duly qualified and equipped profes- sional. ■...
Page 289
To ensure the system operates correctly If any one of the following situations occurs, the Stop & Start system may not operate correctly. Have the vehicle inspected by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional.
4-5. Using the driving support systems Driving assist systems To help enhance driving safety and performance, the following systems operate automatically in response to various driving situations. Be aware, however, that these systems are supple- mentary and should not be relied upon too heavily when operat- ing the vehicle.
Page 291
4-5. Using the driving support systems ◆ Emergency brake signal (if equipped) When the brakes are applied suddenly, the emergency flashers automati- cally flash to alert the vehicle behind. ◆ Trailer Sway Control (if equipped) Helps the driver to control trailer sway by selectively applying brake pres- sure for individual wheels and reducing engine torque when trailer sway is detected.
Page 292
4-5. Using the driving support systems Disabling the TRC/A-TRC systems If the vehicle gets stuck in fresh snow or mud, the TRC/A-TRC sys- tems may reduce power from the engine to the wheels. Pressing to turn the system off may make it easier for you to rock the vehicle in order to free it.
Page 293
TRC, A-TRC and downhill assist control cannot be operated. Contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. ■ Sounds and vibrations caused by the ABS, brake assist, VSC, Trailer Sway Control, TRC, A-TRC and the hill-start assist control systems ●...
Page 294
4-5. Using the driving support systems ■ Automatic reactivation of TRC, A-TRC, VSC and Trailer Sway Control systems After turning the TRC, A-TRC, VSC and Trailer Sway Control systems off, the systems will be automatically re-enabled in the following situations: ●...
Page 295
■ If the slip indicator light comes on It may indicate a malfunction in the VSC/Trailer Sway Control, TRC and A-TRC. Consult any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. WARNING ■ The ABS does not operate effectively when ●...
Page 296
The ABS, TRC, A-TRC, VSC, Trailer Sway Control, hill-start assist control and downhill assist control systems will not function correctly if different tires are installed on the vehicle. Contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional for further information when replacing tires or wheels.
Page 297
4-5. Using the driving support systems WARNING ■ Trailer Sway Control precaution The Trailer Sway Control system is not able to reduce trailer sway in all situ- ations. Depending on many factors such as the conditions of the vehicle, trailer, road surface, and driving environment, the Trailer Sway Control sys- tem may not be effective.
4-5. Using the driving support systems ∗ Downhill assist control system The downhill assist control system helps to prevent excessive speed on steep downhill slopes. The system will operate when the vehicle is traveling under 30 km/h (18 mph), the front-wheel drive control switch is in the L4 or H4 position and the rear differential is not locked.
Page 299
4-5. Using the driving support systems ■ Operating tips Vehicles with automatic transmission The system will operate when the shift lever is in a position other than P, how- ever to make effective use of the system it is recommended that the shift lever be shifted to 2 or 1 range of S mode.
Page 300
The downhill assist control system indicator does not come on when the “DAC” switch is pressed. ● The slip indicator comes on. In the above cases, have your vehicle checked by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. WARNING ■...
● If the DPF system warning message “DPF FULL VISIT YOUR DEALER”/“DPF full Visit your dealer” appears on the display and the malfunction indicator lamp comes on, have the vehicle inspected by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional immediately. ∗...
Page 302
4-5. Using the driving support systems Vehicles with DPF system switch ● If the DPF system warning message “DPF FULL MANUAL REGENERATION REQUIRED SEE OWNER’S MANUAL”/“DPF full Manual regeneration required See owner’s manual” appears on the display, follow the procedure below to regenerate. Stop the vehicle in a safe place.
Page 303
● If the DPF system warning message “DPF FULL VISIT YOUR DEALER”/“DPF full Visit your dealer” appears on the display and the malfunction indicator lamp comes on, have the vehicle inspected by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional immediately. ■...
Page 304
DPF system warning message appears on the display. In this event, dam- age may be caused to the vehicle or an accident may occur. Have the vehi- cle inspected by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional immediately.
4-6. Driving tips Winter driving tips Carry out the necessary preparations and inspections before driving the vehicle in winter. Always drive the vehicle in a man- ner appropriate to the prevailing weather conditions. Preparation for winter ● Use fluids that are appropriate to the prevailing outside tempera- tures.
Page 306
4-6. Driving tips When driving the vehicle Accelerate the vehicle slowly, keep a safe distance between you and the vehicle ahead, and drive at a reduced speed suitable to road con- ditions. When parking the vehicle (in the winter time or in the cold lati- tudes) Park the vehicle and move the shift lever to P (automatic transmis- sion) or 1 or R (manual transmission) without setting the parking...
Page 307
4-6. Driving tips WARNING ■ Driving with snow tires Observe the following precautions to reduce the risk of accidents. Failing to do so may result in a loss of vehicle control and cause death or serious injury. ● Use tires of the specified size. ●...
Audio system 5-1. Basic Operations 5-5. Using an external device Audio system types ...310 Listening to an iPod ...333 Steering wheel audio Listening USB memory switches......312 device ......341 AUX port/USB port ....315 Using the AUX port ....348 ® 5-2. Using the audio system 5-6.
5-1. Basic Operations ∗ Audio system types Vehicles with navigation system or multimedia system Refer to the “Navigation and multimedia system Owner’s manual”. Vehicles without navigation system or multimedia system CD player with AM/FM radio ● Type A ● Type B This illustration is for a left-hand drive vehicle.
Page 311
5-1. Basic Operations ■ Using cellular phones Interference may be heard through the audio system’s speakers if a cellular phone is being used inside or close to the vehicle while the audio system is operating. WARNING ■ Certification for the disc player CAUTION This product is a class 1 laser product classified under the Safety of laser products, IEC 60825-1:2007.
5-1. Basic Operations ∗ Steering wheel audio switches Some audio features can be controlled using the switches on the steering wheel. Operation may differ depending on the type of audio system or navigation system. For details, refer to the manual provided with the audio system or navigation system.
Page 313
5-1. Basic Operations Turning on the power Press the “MODE” switch when the audio system is turned off. Changing the audio source Press the “MODE” switch when the audio system is turned on. The audio source changes as follows each time the button is pressed. If a mode cannot be used, it will be skipped.
Page 314
5-1. Basic Operations Selecting a track/file or song ® Press the “MODE” switch to select the CD, Bluetooth audio, iPod or USB memory mode. Press the “∧” or “∨” switch to select the desired track/file or song. Selecting an album ®...
5-1. Basic Operations AUX port/USB port Connect an iPod, USB memory device or portable audio player to the AUX port/USB port as indicated below. Press the “MODE” button to select “iPod”, “USB” or “AUX”. Connecting using the AUX port/USB port iPod ■...
5-2. Using the audio system Optimal use of the audio system The sound quality, volume balance and ASL settings can be adjusted. Displays the “SETUP” menu/ Selecting the mode Changes the following settings • Sound quality and volume balance →P. 316 The sound quality and balance setting can be changed to pro- duce the best sound.
Page 317
5-2. Using the audio system Adjusting sound quality ■ Pressing the “TUNE >” or “< SELECT” button adjusts the level. Sound Mode Press the Press the Level quality mode displayed “< SELECT” “TUNE >” Bass “BASS” -5 to 5 High Treble “TREBLE”...
5-3. Using the radio Radio operation Press the “MODE” button until “AM” or “FM” is displayed. Type A...
Page 319
5-3. Using the radio Type B Power Adjusting the frequency Volume Seeking the frequency AM/FM mode button Station selectors AF/region code/TA mode setup Displaying the station list (type B only) (type B only) Setting station presets Search for the desired stations by pressing the “TUNE >”, “<...
Page 320
5-3. Using the radio Using the station list (type B only) Updating the station list ■ Press (LIST). The station list will be displayed. Press (UPDATE) to update the list. “Updating” is displayed while the searching is in process, and then avail- able stations will be listed on the display.
5-3. Using the radio Traffic information ■ Press the “SETUP ENTER” button. Press the “TUNE >” or “< SELECT” button to select “RADIO”, and press the “SETUP ENTER” button. Press the “TUNE >” or “< SELECT” button to select “FM TA” mode.
Page 322
5-3. Using the radio ■ EON (Enhanced Other Network) system (for traffic announcement func- tion) (type B only) If the RDS station (with EON data) you are listening to is not broadcasting a traffic information program and the audio system is in the TA (traffic announcement) mode, the radio will be switched automatically to a station broadcasting a traffic information program in the EON AF list when traffic information begins.
5-4. Playing an audio CD and MP3/WMA discs CD player operation Insert a disc, press the “MODE” button to begin listening to a Type A...
Page 324
5-4. Playing an audio CD and MP3/WMA discs Type B CD eject Selecting a track, fast forward- ing or rewinding Power Random play or back button Volume Repeat play Changing the audio source/ playback Displaying track list Selecting a track from the list Displaying text message Moving the cursor to select a desired item from the list...
Page 325
5-4. Playing an audio CD and MP3/WMA discs Using the CD player Selecting a track ■ Press the “SEEK >” or “< TRACK” button to move up or down until the desired track number is displayed. Selecting a track from a track list ■...
Page 326
5-4. Playing an audio CD and MP3/WMA discs Playing back MP3 and WMA discs Selecting folders one at a time ■ Press (<FOLDER) or (FOLDER>) to select the desired folder. Selecting a folder and file from folder list ■ Press (LIST).
Page 327
If an error message is displayed, refer to the following table and take the appropriate measures. If the problem is not rectified, take the vehicle to any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. Message...
Page 328
5-4. Playing an audio CD and MP3/WMA discs ■ MP3 and WMA files MP3 (MPEG Audio LAYER3) is a standard audio compression format. Files can be compressed to approximately 1/10 of their original size by using MP3 compression. WMA (Windows Media Audio) is a Microsoft audio compression format. This format compresses audio data to a size smaller than that of the MP3 for- mat.
Page 329
5-4. Playing an audio CD and MP3/WMA discs ● Compatible media Media that can be used for MP3 and WMA playback are CD-Rs and CD- RWs. Playback in some instances may not be possible, depending on the status of the CD-R or CD-RW. Playback may not be possible or the audio may jump if the disc is scratched or marked with fingerprints.
Page 330
5-4. Playing an audio CD and MP3/WMA discs ● MP3 and WMA playback When a disc containing MP3 or WMA files is inserted, all files on the disc are first checked. Once the file check is finished, the first MP3 or WMA file is played.
Page 331
5-4. Playing an audio CD and MP3/WMA discs NOTICE ■ CDs and adapters that cannot be used Do not use the following types of CDs. Also, do not use 8 cm (3 in.) CD adapters, DualDiscs or printable discs. Doing so may damage the player and/or the CD insert/eject function. ●...
Page 332
5-4. Playing an audio CD and MP3/WMA discs NOTICE ● CDs with a transparent or translucent recording area ● CDs that have tape, stickers or CD-R labels attached to them, or that have had the label peeled off ■ CD Player precautions Failure to follow the precautions below may result in serious damage to the CDs or the player itself.
5-5. Using an external device Listening to an iPod Connecting an iPod enables you to enjoy music from the vehicle speakers. Connecting an iPod →P. 315 Control panel Type A...
Page 334
5-5. Using an external device Type B Power Selecting a song, fast-forward- ing or rewinding Volume Random play or back button Changing the audio source/ playback Repeat play Selecting an iPod menu/song iPod menu mode, playback from the list Displaying song list Moving the cursor to select a Displaying text message desired item from the list...
Page 335
5-5. Using an external device Play mode list ■ First Second Third Fourth Play mode selection selection selection selection Playlists “Playlists” Songs select select Albums “Artists” Artists select Songs select select Albums “Albums” Songs select select “Songs” Songs select Podcasts Episodes “Podcasts”...
Page 336
5-5. Using an external device Selecting songs Press the “SEEK >” or “< TRACK” button to select the desired song. Selecting a song from the song list Press (LIST). The song list will be displayed. Press the “TUNE >” or “< SELECT” button to select a song. Press the “SETUP ENTER”...
Page 337
5-5. Using an external device Switching the display Press (TEXT) to display or hide the album title. If there are continuing texts, is displayed. Press and hold (TEXT) to display the remaining texts. ■ About iPod ● “Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod, or iPhone, respectively, and has been certified by the developer to meet Apple performance standards.
Page 338
If an error message is displayed, refer to the following table and take the appropriate measures. If the problem is not rectified, take the vehicle to any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. Message...
Page 339
5-5. Using an external device ■ Compatible models ® ® ® ® ® The following iPod , iPod nano , iPod classic , iPod touch and iPhone devices can be used with this system. ● Made for • iPod touch (5th generation) •...
Page 340
5-5. Using an external device NOTICE ■ To prevent damage to iPod ● Do not leave iPod in the vehicle. The temperature inside the vehicle may become high, resulting in damage to the iPod. ● Do not push down on or apply unnecessary pressure to the iPod while it is connected as this may damage the iPod or its terminal.
5-5. Using an external device Listening USB memory device Connecting a USB memory enables you to enjoy music from the vehicle speakers. Connecting a USB memory →P. 315 Control panel Type A...
Page 342
5-5. Using an external device Type B Power Selecting a file, fast-forward- ing or rewinding Volume Random play or back button Changing the audio source/ playback Repeat play Selecting a song, file or folder Selecting a folder from the list Displaying folder list Moving the cursor to select a Displaying text message...
Page 343
5-5. Using an external device Selecting a folder Selecting folders one at a time ■ Press (<FOLDER) or (FOLDER>) to select the desired folder. Selecting a folder and file from folder list ■ Press (LIST). The folder list will be displayed. Press the “TUNE >”...
Page 344
If an error message is displayed, refer to the following table and take the appropriate measures. If the problem is not rectified, take the vehicle to any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. Message...
Page 345
5-5. Using an external device ● MP3 and WMA files MP3 (MPEG Audio LAYER3) is a standard audio compression format. Files can be compressed to approximately 1/10 of their original size by using MP3 compression. WMA (Windows Media Audio) is a Microsoft audio compression format. This format compresses audio data to a size smaller than that of the MP3 format.
Page 346
5-5. Using an external device ● File names The only files that can be recognized as MP3/WMA and played are those with the extension .mp3 or .wma. ● ID3 and WMA tags ID3 tags can be added to MP3 files, making it possible to record the track title, artist name, etc.
Page 347
5-5. Using an external device ● Playback • To play MP3 files with steady sound quality, we recommend a fixed bit rate of at least 128 kbps and a sampling frequency of 44.1 kHz. • There is a wide variety of freeware and other encoding software for MP3 and WMA files on the market, and depending on the status of the encod- ing and the file format, poor sound quality or noise at the start of playback may result.
5-5. Using an external device Using the AUX port This port can be used to connect a portable audio device and lis- ten to it using the vehicle’s speakers. Connecting a portable player →P. 315 ■ Operating portable audio devices connected to the audio system The volume can be adjusted using the vehicle’s audio controls.
® 5-6. Using Bluetooth devices ® Bluetooth audio/phone ® The following can be performed using Bluetooth wireless com- munication: ◆ ® Bluetooth audio ® The Bluetooth audio system enables you to enjoy music played on a portable digital audio player (portable player) from the vehicle speakers via wireless communication.
Page 350
® 5-6. Using Bluetooth devices Device registration/connection flow ® 1. Register the Bluetooth device to be used with audio system (→P. 355) ® 2. Connect the registered Bluetooth device to be used (→P. 356, 358) 3. Set automatic connection of the device (→P.
® 5-6. Using Bluetooth devices Audio unit Type A Type B ® Bluetooth connection condition ® If “BT” is not displayed, the Bluetooth audio/phone cannot be used. Display A message, name, number, etc. is displayed. Lower-case characters and special characters may not be displayed. “SETUP ENTER”...
Page 352
® 5-6. Using Bluetooth devices Microphone You can use the microphone when talking on the phone. The person you are speaking to can be heard from the speakers. To use the hands-free system, you ® must register your Bluetooth phone in the system. (→P. 355) ®...
Page 353
® 5-6. Using Bluetooth devices First menu Second menu Third menu Operation details Adding a new num- “Add contacts” Registering a speed “Add SD” dial Deleting a number “Delete call stored in the call his- “Phonebook” history” tory Deleting a number “Delete contacts”...
® 5-6. Using Bluetooth devices Using the steering wheel switches The steering wheel switches can be used to operate a connected cellular phone, or portable digital audio player (portable player). ® Operating Bluetooth phone using the steering wheel switches Volume The voice guidance volume cannot be adjusted using this button.
® 5-6. Using Bluetooth devices ® Registering a Bluetooth device ® Before using the Bluetooth audio/phone, it is necessary to reg- ® ister a Bluetooth device in the system. Follow the procedure below to register (pair) a device: ® How to register a Bluetooth device Press the “SETUP ENTER”...
5-7. “SETUP” menu Using the “SETUP” menu (“Bluetooth*” menu) ® Registering a Bluetooth device in the system allows the system to function. The following functions can be used for registered devices: Functions and operation procedures Press the “SETUP ENTER” button. Select “Bluetooth ”...
Page 357
5-7. “SETUP” menu ® Registering a Bluetooth device Select “Pairing” using the “TUNE >” or “< SELECT” button, and press the “SETUP ENTER” button, and press (Add New). ® ● If a Bluetooth device is not connected currently ® Perform the procedure for registering a Bluetooth device from step .
Page 358
5-7. “SETUP” menu Listing the registered cellular phones Select “List phone” using the “TUNE >” or “< SELECT” button, and press the “SETUP ENTER” button. The list of registered cellular phones will be displayed. ● Connecting the registered cellular phone to the audio system Select the name of the cellular phone to be connected using the “TUNE >”...
Page 359
5-7. “SETUP” menu Listing the registered portable players Select “List audio” using the “TUNE >” or “< SELECT” button, and press the “SETUP ENTER” button. The list of registered portable play- ers will be displayed. ● Connecting the registered portable player to the audio system Select the name of the portable player to be connected using the “TUNE >”...
Page 360
5-7. “SETUP” menu Changing the passkey Select “Passkey” using the “TUNE >” or “< SELECT” button, and press the “SETUP ENTER” button. Select a 4 to 8-digit passkey using the “TUNE >”, “< SELECT” and “SETUP ENTER” button. Input the number 1 digit at a time. When the entire number to be registered as a passkey has been input, press (ENTER).
Page 361
5-7. “SETUP” menu Setting the automatic connection confirmation display to on or off If the “Display setting” is set to on, the portable player connection sta- tus will be displayed when the engine switch is turned to the “ACC” position (vehicles without smart entry & start system) or ACCESSORY mode (vehicles with smart entry &...
5-7. “SETUP” menu Using the “SETUP” menu (“TEL” or “PHONE” menu) Functions and operation procedures To enter the menu for each function, press the “SETUP ENTER” but- ton and follow the steps below using the “TUNE >” or “< SELECT” but- ton: ●...
Page 363
5-7. “SETUP” menu Adding a new phone number Select “Add contacts” using the “TUNE >” or “< SELECT” button, and press the “SETUP ENTER” button. ● Transferring all contacts from the cellular phone Select “Overwrite all” using the “TUNE >” or “< SELECT” button, and press the “SETUP ENTER”...
Page 364
5-7. “SETUP” menu Deleting call histories Select “Delete call history” using the “TUNE >” or “< SELECT” button, and press the “SETUP ENTER” button. ● Deleting outgoing call history Select “Outgoing calls” using the “TUNE >” or “< SELECT” but- ton, and press the “SETUP ENTER”...
Page 365
5-7. “SETUP” menu ● Deleting missed call history Select “Missed calls” using the “TUNE >” or “< SELECT” button, and press the “SETUP ENTER” button. Select the desired phone number using the “TUNE >” or “< SELECT” button, and press the “SETUP ENTER” button. Press (YES).
Page 366
5-7. “SETUP” menu Deleting a registered phone number Select “Delete contacts” using the “TUNE >” or “< SELECT” button, and press the “SETUP ENTER” button. Select the desired phone number using the “TUNE >” or “< SELECT” button, and press the “SETUP ENTER” button. Press (YES).
Page 367
5-7. “SETUP” menu Setting call volume Select “Call volume” using the “TUNE >” or “< SELECT” button, and press the “SETUP ENTER” button. Change the call volume. To decrease the volume: Press the “< SELECT” button. To increase the volume: Press the “TUNE >” button. To set the volume, press (BACK).
Page 368
5-7. “SETUP” menu Setting ring tone Select “Ringtone” using the “TUNE >” or “< SELECT” button, and press the “SETUP ENTER” button. Select a ring tone (1 - 3) using the “TUNE >” or “< SELECT” button, and press the “SETUP ENTER” button. To set the selected ring tone, press (BACK).
® 5-8. Bluetooth Audio ® Operating a Bluetooth enabled portable player Type A Type B Power Random play or back button Volume Repeat play Changing the audio source/ Selecting an album playback Playback/pause Selecting a track, fast-forward- Displaying text message ing or rewinding...
Page 370
® 5-8. Bluetooth Audio Selecting an album Press (<FOLDER) or (FOLDER>) to select desired album. Selecting a track Press the “SEEK >” or “< TRACK” button to select the desired track. Fast-forwarding and rewinding tracks Press and hold the “SEEK >” or “< TRACK” button. Repeat play Pressing (RPT) changes modes in the following order:...
® 5-9. Bluetooth Phone Making a phone call To enter the “TEL” or “PHONE” mode, press the off-hook switch. Dialing by selecting a name Select “Phonebook” using the “TUNE >” or “< SELECT” button, and press the “SETUP ENTER” button. Select the desired name using the “TUNE >”...
Page 372
® 5-9. Bluetooth Phone Dialing from call histories Select “All calls”, “Missed calls”, “Incoming calls” or “Outgoing calls” using the “TUNE >” or “< SELECT” button, and press the “SETUP ENTER” button. Select a desired number using the “TUNE >” or “< SELECT” button, and press the off-hook switch.
® 5-9. Bluetooth Phone Receiving a phone call Answering the phone Press the off-hook switch. Refusing the call Press the on-hook switch. Receiving a call when on another call Press the off-hook switch. Pressing the off-hook switch again returns you to the previous call. Adjusting the ring tone volume when receiving a call To decrease the volume: Press the “VOL -”...
® 5-9. Bluetooth Phone Speaking on the phone Transferring a call A call can be transferred between the cellular phone and system while dialing, receiving a call, or during a call. Use one of the following methods: a. Operate the cellular phone. Refer to the manual that comes with the cellular phone for the operation of the phone.
Page 375
® 5-9. Bluetooth Phone ■ When talking on the phone ● Do not talk simultaneously with the other party. ● Keep the volume of the received voice down. Otherwise, voice echo will increase. ■ Automatic volume adjustment When vehicle speed is 80 km/h (50 mph) or more, the volume automatically increases.
® 5-10. Bluetooth ® Bluetooth ■ Conditions affecting operation ® The Bluetooth audio/phone may not operate normally in the following situa- tions: ® ● The portable player does not support Bluetooth ● The cellular phone is located outside the service area ®...
Page 377
® 5-10. Bluetooth ■ Compatible models ® ● Bluetooth specifications: Ver. 1.1, or higher (Recommended: Ver. 2.1 + EDR or higher) ● Following Profiles: • A2DP (Advanced Audio Distribution Profile) Ver. 1.0 or higher (recom- mended: Ver. 1.2 or higher) •...
Page 379
® 5-10. Bluetooth FCC ID: BABFT0052A CAUTION: Radio Frequency Radiation Exposure This equipment complies with FCC radiation exposure limits set forth for uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE).
Page 382
® 5-10. Bluetooth WARNING ■ While driving ® Do not use the portable audio player or connect the Bluetooth system. ■ Caution regarding interference with electronic devices ® ● Your audio unit is fitted with Bluetooth antennas. People with implantable cardiac pacemakers, cardiac resynchronization therapy-pacemakers or implantable cardioverter defibrillators should maintain a reasonable dis- ®...
Interior features 6-1. Using the air conditioning 6-2. Using the interior lights system and defogger Interior lights list....398 Manual air conditioning • Personal/interior light system ......384 main switch....399 • Personal/interior Automatic air conditioning lights ......399 system ......390 • Interior light....399 Seat heaters ......397 6-3.
6-1. Using the air conditioning system and defogger ∗ Manual air conditioning system Air conditioning controls Adjusting the fan speed setting ■ Turn clockwise (increase) or counterclockwise (decrease). Turning the dial to “OFF” turns off the fan. Adjusting the temperature setting ■...
Page 385
6-1. Using the air conditioning system and defogger Other functions Switching between outside air and recirculated air modes ■ Move the outside/recirculated air mode lever. The mode switches between (introduces air from outside the vehi- cle) and (recycles air inside the vehicle) each time the lever is moved.
Page 386
6-1. Using the air conditioning system and defogger Heater idle up (if equipped) ■ This feature is used to heat the engine coolant, speed up warming of the cab in cold weather, and keep the cab warm when the vehicle is not moving.
Page 387
6-1. Using the air conditioning system and defogger Air outlets Location of air outlets ■ The air outlets and air volume changes according selected air flow mode. : Some models Adjusting the position of and opening and closing the air out- ■...
Page 388
6-1. Using the air conditioning system and defogger ■ Fogging up of the windows ● The windows will easily fog up when the humidity in the vehicle is high. Turning (if equipped) on will dehumidify the air from the outlets and defog the windshield effectively.
Page 389
6-1. Using the air conditioning system and defogger ■ Air conditioning system operations when the engine is stopped due to the Stop & Start system (vehicles with Stop & Start system) When the engine is stopped due to Stop & Start system operations, the man- ual air conditioning cooling, heating and dehumidification functions turn off.
6-1. Using the air conditioning system and defogger ∗ Automatic air conditioning system Air outlets and fan speed are automatically adjusted according to the temperature setting. Air conditioning controls This illustration is for a left-hand drive vehicle. Some button positions differ for right-hand drive vehicles.
Page 391
6-1. Using the air conditioning system and defogger Changing the air flow mode ■ Press to change the air outlets. outlets used switched each time the button is pressed. Air flows to the upper body. Air flows to the upper body and feet.
Page 392
6-1. Using the air conditioning system and defogger Other functions Switching between outside air and recirculated air modes ■ Press to switch to recirculated air mode and press switch to outside air mode. Defogging the windshield ■ Press The dehumidification function operates and fan speed increases. Press if the recirculated air mode is used.
Page 393
6-1. Using the air conditioning system and defogger Power heater (if equipped) ■ This feature is used to heat the engine coolant, speed up warming of the cab in cold weather, and keep the cab warm. Press the switch to turn the power heater on/off If you do not turn the switch to off, the engine speed may be...
Page 394
6-1. Using the air conditioning system and defogger Side outlets Direct air flow to the left or right, up or down. Close the vents. Rear outlets Direct air flow to the left or right, up or down. Close the vents. ■...
Page 395
6-1. Using the air conditioning system and defogger ■ Outside/recirculated air mode ● When driving on dusty roads such as tunnels or in heavy traffic, press This is effective in preventing outside air from entering the vehicle interior. During cooling operation, setting the recirculated air mode will also cool the vehicle interior effectively.
Page 396
6-1. Using the air conditioning system and defogger ■ An odor comes from the air conditioning system due to the Stop & Start system operation (vehicles with Stop & Start system) When the engine is stopped due to Stop & Start system operations, an odor caused by moisture may be detected.
6-1. Using the air conditioning system and defogger ∗ Seat heaters Turns on the front left seat heater The indicator light comes on. Turns on the front right seat heater The indicator light comes on. ● The seat heaters can be used when the engine switch is in the “ON” position (vehicles without smart entry &...
6-2. Using the interior lights Personal/interior light main switch Door position The personal/interior lights come on when a door is opened. They turn off when the doors are closed. The personal/interior lights can be individually turned on or off. Personal/interior lights On/off Interior light (if equipped) Door position...
6-2. Using the interior lights ● Illuminated entry system (if equipped): Vehicles without smart entry & start system The lights automatically turn on/off according to the engine switch position, whether the doors are locked/unlocked, and whether the doors are open/ closed.
6-3. Using the storage features WARNING ● Do not leave glasses, lighters or spray cans in the storage spaces, as this may cause the following when cabin temperature becomes high: • Glasses may be deformed by heat or cracked if they come into contact with other stored items.
6-3. Using the storage features Cup holders Type A Type B (if equipped) Press in and pull the cup holder. Type C (if equipped) Type D (if equipped) Type E (if equipped) Pull the armrest down.
6-3. Using the storage features WARNING Do not place anything other than cups or beverage cans in the cup holders. Other items may be thrown out of the holders in the event of sudden brak- ing, sudden swerving or an accident, cause injury. If possible, cover hot drinks to prevent burns.
6-3. Using the storage features Auxiliary boxes Type A Type B Press the button. Press in and pull the cup holder, and push the cup tray. Type C Type D Press in the lid. The auxiliary box is useful for tem- porarily storing sunglasses and similar small items.
Page 406
6-3. Using the storage features Type G (if equipped) : The shape of the auxiliary box may differ depending on the grade, etc. ● Air conditioning-linked temperature regulation function (type A) (if equipped): By introducing air from the air conditioning system into the auxiliary box, canned drinks etc.
Page 407
6-3. Using the storage features ● Normal use (type A) (if equipped): Close the air intake lid inside the auxiliary box. ● Items unsuitable for the auxiliary box (type A) (if equipped): • Drinks in unsealed container • Fragile items, perishables or anything with strong odor WARNING ●...
6-4. Using the other interior features Other interior features Sun visors To set the visor in the forward position, flip it down. To set the visor in the side posi- tion, flip down, unhook, and swing it to the side. Vanity mirror (if equipped) Open the cover to use.
6-4. Using the other interior features Clock The clock can be adjusted by pressing the buttons. Adjusts the hours Adjusts the minutes Rounds to the nearest hour : e.g. 1:00 to 1:29 → 1:00 1:30 to 1:59 → 2:00 ● The clock is displayed when: Vehicles without smart entry &...
6-4. Using the other interior features Power outlets (if equipped) The power outlet can be used for the following components: 12 V DC: Please use as a power supply for electronic goods that use less than 12 V DC / 10 A (power consumption of 120 W). When using electronic goods, make sure that the power consumption of all the connected power outlets is less than 120 W.
Page 412
6-4. Using the other interior features ● The power outlet can be used when: Vehicles without smart entry & start system 12 V DC: The engine switch is in the “ACC” or “ON” position. 220 V AC: The engine switch is in the “ON” position. Vehicles with smart entry &...
6-4. Using the other interior features Grocery bag hooks (if equipped) WARNING Keep the hooks returned in place when not in use. NOTICE Do not hang any object heavier than 4 kg (8.8 lb.).
6-4. Using the other interior features Coat hooks (if equipped) The coat hooks are provided above the back window. Armrest (if equipped) Fold down the armrest for use. NOTICE To prevent damage to the armrest, do not apply too much load on the arm- rest.
Maintenance and care 7-1. Maintenance and care Cleaning and protecting the vehicle exterior ..416 Cleaning and protecting the vehicle interior ...419 7-2. Maintenance Maintenance requirements....422 7-3. Do-it-yourself maintenance Do-it-yourself service precautions ......425 Hood ........427 Engine compartment..429 Tires........443 Tire inflation pressure ..446 Wheels.......448 Air conditioning filter ..450 Wireless remote control/...
7-1. Maintenance and care Cleaning and protecting the vehicle exterior Perform the following to protect the vehicle and maintain it in prime condition: ● Working from top to bottom, liberally apply water to the vehicle body, wheel wells and underside of the vehicle to remove any dirt and dust.
Page 417
7-1. Maintenance and care ■ Aluminum wheels (if equipped) ● Remove any dirt immediately by using a neutral detergent. Do not use hard brushes or abrasive cleaners. Do not use strong or harsh chemical clean- ers. Use the same mild detergent and wax as used on the paint. ●...
Page 418
7-1. Maintenance and care NOTICE ■ To prevent paint deterioration and corrosion on the body and compo- nents (aluminum wheels etc.) ● Wash the vehicle immediately in the following cases: • After driving near the sea coast • After driving on salted roads •...
7-1. Maintenance and care Cleaning and protecting the vehicle interior The following procedures will help protect your vehicle’s interior and keep it in top condition: Protecting the vehicle interior Remove dirt and dust using a vacuum cleaner. Wipe dirty surfaces with a cloth dampened with lukewarm water.
Page 420
7-1. Maintenance and care ■ Caring for leather areas Toyota recommends cleaning the interior of the vehicle at least twice a year to maintain the quality of the vehicle’s interior. ■ Shampooing the carpets There are several commercial foaming-type cleaners available. Use a sponge or brush to apply the foam.
Page 421
7-1. Maintenance and care NOTICE ■ Cleaning detergents ● Do not use the following types of detergent, as they may discolor the vehi- cle interior or cause streaks or damage to painted surfaces: • Non-seat portions: Organic substances such as benzene or gasoline, alkaline or acidic solutions, dye, and bleach •...
Scheduled maintenance Scheduled maintenance should be performed at specified intervals according to the maintenance schedule. For full details of your maintenance schedule, refer to the “Toyota Service Booklet” or “Toyota Warranty Booklet”. Do-it-yourself maintenance What about do-it-yourself maintenance? Many maintenance items are easy to do yourself if you have a little mechanical ability and a few basic automotive tools.
Page 423
● Engine coolant temperature continually higher than normal If you notice any of these clues, take your vehicle to any authorized Toyota dealer or repairer, or another duly qualified and equipped professional as soon as possible. Your vehicle may need adjustment or repair.
Page 424
7-2. Maintenance WARNING ■ If your vehicle is not properly maintained Improper maintenance could result in serious damage to the vehicle and possible serious injury or death. ■ Handling of the battery Battery posts, terminals and related accessories contain lead and lead com- pounds which are known to cause brain damage.
Battery condition • Conventional wrench (for terminal clamp bolts) (→P. 437) • Distilled water • “Toyota Super Long Life Coolant” or a similar high quality ethylene glycol-based non-silicate, non- amine, non-nitrite and non-borate coolant with long- Engine coolant life hybrid organic acid technology level (→P.
Page 426
7-3. Do-it-yourself maintenance WARNING The engine compartment contains many mechanisms and fluids that may move suddenly, become hot, or become electrically energized. To avoid death or serious injury, observe the following precautions. ■ When working on the engine compartment ● Keep hands, clothing and tools away from the moving fan and engine drive belt.
7-3. Do-it-yourself maintenance Hood Release the lock from the inside of the vehicle to open the hood. Pull the hood lock release lever. The hood will pop up slightly. Pull up the auxiliary catch lever and lift the hood. Hold the hood open by inserting the supporting rod into either of the slots.
Page 428
7-3. Do-it-yourself maintenance WARNING ■ Pre-driving check Check that the hood is fully closed and locked. If the hood is not locked properly, it may open while the vehicle is in motion and cause an accident, which may result in death or serious injury. ■...
Page 432
7-3. Do-it-yourself maintenance Engine oil With the engine at operating temperature and turned off, check the oil level on the dipstick. Checking the engine oil ■ Park the vehicle on level ground. After warming up the engine and turning it off, wait more than 5 minutes for the oil to drain back into the bottom of the engine.
Page 433
7-3. Do-it-yourself maintenance Adding engine oil ■ If the oil level is below or near the low level mark, add engine oil of the same type as that already in the engine. Make sure to check the oil type and prepare the items needed before adding oil.
Page 434
Dispose of used oil and filters only in a safe and acceptable manner. Do not dispose of used oil and filters in household trash, in sewers or onto the ground. Call any authorized Toyota dealer or repairer, or another duly qualified and equipped professional, service station or auto parts store for information concerning recycling or disposal.
“Toyota Super Long Life Coolant” is a mixture of 50% coolant and 50% deion- ized water. (Minimum temperature: -35°C [-31°F]) For more details about engine coolant, contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional.
Page 436
Check the radiator, condenser and intercooler and clear away any for- eign objects. If any of the above parts is extremely dirty or you are not sure of their condition, have your vehicle inspected by any authorized Toyota dealer or repairer, or another duly qualified and equipped pro- fessional. WARNING ■...
Page 437
7-3. Do-it-yourself maintenance Battery Check the battery as follows. Caution symbols ■ The meanings of each caution symbol on the top of the battery are as follows: No smoking, no naked Battery acid flames, no sparks Note operating Shield eyes instructions Keep away from Explosive gas...
Page 438
7-3. Do-it-yourself maintenance Checking battery fluid (vehicles with maintenance type bat- ■ tery) If there are lines on the side of the battery: Check that the level is between the upper and lower lines. Upper line Lower line If the fluid level is at or below the lower line, add distilled water.
Page 439
If the system will not start even after multiple attempts, contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. ■ If a symbol of a battery is shown on the multi-information display (if equipped) There is a malfunction in the vehicle’s charging system.
Page 440
7-3. Do-it-yourself maintenance WARNING ■ Chemicals in the battery Batteries contain poisonous and corrosive sulfuric acid and may produce hydrogen gas which is flammable and explosive. To reduce the risk of death or serious injury, take the following precautions while working on or near the battery: ●...
Page 441
7-3. Do-it-yourself maintenance NOTICE ■ When recharging the battery Never recharge the battery while the engine is running. Also, be sure all accessories are turned off. ■ When adding distilled water (vehicles with maintenance type battery) Avoid overfilling. Water spilled during battery recharging may cause corro- sion.
Page 442
Even if you decide to drain it yourself, contact any authorized Toyota dealer or repairer, or another duly qualified and equipped pro- fessional. The water in the fuel filter needs to be drained if one of the following...
7-3. Do-it-yourself maintenance Tires Replace or rotate tires in accordance with maintenance sched- ules and treadwear. Checking tires Check if the treadwear indicators are showing on the tires. Also check the tires for uneven wear, such as excessive wear on one side of the tread.
A tire goes flat repeatedly or cannot be properly repaired due to the size or location of a cut or other damage If you are not sure, consult with any authorized Toyota dealer or repairer, or another duly qualified and equipped professional.
Page 445
Do not mix tires of different makes, models or tread patterns. Also, do not mix tires of remarkably different treadwear. ● Do not use tire sizes other than those recommended by Toyota. ● Do not mix differently constructed tires (radial, bias-belted or bias-ply tires).
● Reduced safety ● Damage to the drive train If a tire needs frequent inflating, have it checked by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. ■ Instructions for checking tire inflation pressure When checking tire inflation pressure, observe the following: ●...
Page 447
7-3. Do-it-yourself maintenance WARNING ■ Proper inflation is critical to save tire performance Keep your tires properly inflated. If the tires are not properly inflated, the following conditions may occur which could lead to an accident resulting in death or serious injury: ●...
● Used wheels ● Bent wheels that have been straightened Aluminum wheel precautions (if equipped) ● Use only Toyota wheel nuts and wrenches designed for use with your aluminum wheels. ● When rotating, repairing or changing your tires, check that the wheel nuts are still tight after driving 1600 km (1000 miles).
Page 449
7-3. Do-it-yourself maintenance WARNING ■ When replacing wheels ● Do not use wheels that are a different size from those recommended in the Owner’s Manual, as this may result in a loss of handling control. ● Never use an inner tube in a leaking wheel which is designed for a tube- less tire.
7-3. Do-it-yourself maintenance Air conditioning filter The air conditioning filter must be changed regularly to maintain air conditioning efficiency. Removal method Vehicles without smart entry & start system: Turn the engine switch to the “LOCK” position. Vehicles with smart entry & start system: Turn the engine switch off. Open the glove box.
Page 451
Inspect and replace the air conditioning filter according to the maintenance schedule. In dusty areas or areas with heavy traffic flow, early replacement may be required. (For scheduled maintenance information, please refer to the “Toyota Service Booklet” or “Toyota Warranty Booklet”.) ■ If air flow from the vents decreases dramatically The filter may be clogged.
7-3. Do-it-yourself maintenance Wireless remote control/electronic key ∗ battery Replace the battery with a new one if it is depleted. You will need the following items: ● Flathead screwdriver ● Small flathead screwdriver ● Lithium battery Vehicles without smart entry & start system: CR1620 Vehicles with smart entry &...
Page 453
7-3. Do-it-yourself maintenance Remove the depleted battery. Insert a new battery with the “+” terminal facing up. Vehicles with smart entry & start system Take out the mechanical key. Remove the cover. To prevent damage to the key, cover the tip of the screwdriver with a rag.
Page 454
Vehicles without smart entry & start system: CR1620 Vehicles with smart entry & start system: CR2032 ● Batteries can be purchased at any authorized Toyota dealer or repairer, or another duly qualified and equipped professional, local electrical appliance shops or camera stores.
7-3. Do-it-yourself maintenance Checking and replacing fuses If any of the electrical components do not operate, a fuse may have blown. If this happens, check and replace the fuses as nec- essary. Vehicles without smart entry & start system: Turn the engine switch to the “LOCK” position. Vehicles with smart entry &...
Page 456
7-3. Do-it-yourself maintenance Under the instrument panel (right-hand drive vehicles) Remove cover equipped). Remove the lid. Behind the instrument panel (left-hand drive vehicles) Remove the glove box (→P. 450), and remove the lid. Behind the instrument panel (right-hand drive vehicles) Remove the glove box (→P.
Page 457
7-3. Do-it-yourself maintenance Behind the cowl side panel Remove the driver’s door scuff plate (left-hand drive vehicles) or the front passenger’s door scuff plate (right-hand drive vehicles). Remove the nut and the cowl side panel. Remove the fuse. Only type A fuse can be removed using the pullout tool.
Page 458
Replace the blown fuse with a new fuse of an appropriate amperage rat- ing. The amperage rating can be found on the fuse box lid. Type E: Contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. Type A...
Page 459
(→P. 460) ● If the replaced fuse blows again, have the vehicle inspected by any autho- rized Toyota dealer or repairer, or another duly qualified and equipped pro- fessional. ■ If there is an overload in a circuit The fuses are designed to blow, protecting the wiring harness from damage.
As there is a danger that components may be damaged, we recommend that replacement is carried out by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. Preparing for light bulb replacement Check the wattage of the light bulb to be replaced.
Page 461
7-3. Do-it-yourself maintenance Vehicles with LED headlights Headlight (high beam) Front fog light Front turn signal light Rear ■ Rear fog light Rear fog light (left-hand drive vehicles) (right-hand drive vehicles) or back-up light or back-up light License plate light Rear turn signal light Stop/tail light : If equipped...
Page 462
7-3. Do-it-yourself maintenance Replacing light bulbs Headlight high/low beams (vehicles with halogen headlights) ■ Unplug the connector and remove the rubber cover. Release the bulb retaining spring. Remove the bulb. To install a new bulb, align the tabs of the bulb with the cutouts of the mounting hole.
Page 463
7-3. Do-it-yourself maintenance Headlight high beams (vehicles with LED headlights) ■ Unplug the connector while depressing the lock release. Turn the bulb base counter- clockwise. Replace the light bulb, and install the bulb base. Align the 3 tabs on the light bulb with the mounting, and insert.
Page 464
7-3. Do-it-yourself maintenance Install the connector Shake the bulb base gently to check that it is not loose, turn the headlight high beams on once and visually confirm that no light is leaking through the mounting. Front position lights/daytime running lights (if equipped) ■...
Page 465
7-3. Do-it-yourself maintenance Front turn signal lights ■ Vehicles with halogen headlights Turn the bulb base counter- clockwise. Remove the light bulb. When installing, reverse the steps listed.
Page 466
7-3. Do-it-yourself maintenance Vehicles with LED headlights To allow enough working space, turn steering wheel to the opposite side where bulb replaced is located. Remove the screws and clips. Removing the clip Installing the clip Type A Type B...
Page 467
7-3. Do-it-yourself maintenance Partly remove the fender liner and turn the bulb base counterclockwise. Fender liner Bumper Remove the light bulb. When installing, reverse the steps listed.
Page 468
7-3. Do-it-yourself maintenance Front fog lights (if equipped) ■ To allow enough working space, turn the steering wheel to the opposite side where the bulb to be replaced is located. Remove the screws and clips. Vehicles without steel bumper Vehicles with steel bumper Removing the clip Installing the clip Type A...
Page 469
7-3. Do-it-yourself maintenance Partly remove the fender liner and unplug the connector while pressing the lock release. Vehicles without steel bumper Vehicles with steel bumper Fender liner Bumper Turn the bulb base counter- clockwise. Replace the light bulb, and install the bulb base. Align the 3 tabs on the light bulb with the mounting, and insert.
Page 470
7-3. Do-it-yourself maintenance Turn and secure the bulb base. Install the connector Shake the bulb base gently to check that it is not loose, turn the front fog lights on once and visually confirm that no light is leaking through the mounting. When installing the fender liner, screws and clips, reverse the removing procedure in steps...
Page 471
7-3. Do-it-yourself maintenance Stop/tail lights, rear turn signal lights and back-up lights or ■ rear fog light (if equipped) Remove the securing bolts and pull the unit sideways to remove. Turn the bulb base counter- clockwise. Stop/tail light Rear turn signal light Back-up light or rear fog light Remove the light bulb.
Page 472
7-3. Do-it-yourself maintenance License plate light ■ Remove the unit. Turn the bulb base counter- clockwise. Remove the light bulb. When installing, reverse the steps listed.
Page 473
(mirror mounted type) and high mounted stoplight (if equipped) consists of a number of LEDs. If any of the LEDs burn out, take your vehicle to any autho- rized Toyota dealer or repairer, or another duly qualified and equipped profes- sional to have the light replaced.
Page 474
7-3. Do-it-yourself maintenance WARNING ■ Replacing light bulbs ● Turn off the lights. Do not attempt to replace the bulb immediately after turning off the lights. The bulbs become very hot and may cause burns. ● Do not touch the glass portion of the light bulb with bare hands. When it is unavoidable to hold the glass portion, use and hold with a clean dry cloth to avoid getting moisture and oils on the bulb.
When trouble arises 8-1. Essential information Fuel pump shut off system (gasoline engine Emergency flashers...476 only).........485 If your vehicle has to Fire extinguisher ....486 be stopped in an emergency.......477 If a warning light turns on or a warning buzzer 8-2. Steps to take in an sounds ......487 emergency If a warning message is...
8-1. Essential information Emergency flashers The emergency flashers are used to warn other drivers when the vehicle has to be stopped in the road due to a breakdown, etc. Press the switch. All the turn signal lights will flash. To turn them off, press the switch once again.
8-1. Essential information If your vehicle has to be stopped in an emergency Only in an emergency, such as if it becomes impossible to stop the vehicle in the normal way, stop the vehicle using the follow- ing procedure: Steadily step on the brake pedal with both feet and firmly depress it. Do not pump the brake pedal repeatedly as this will increase the effort required to slow the vehicle.
Page 478
8-1. Essential information WARNING ■ If the engine has to be turned off while driving ● Power assist for the brakes and steering wheel will be lost, making the brake pedal harder to depress and the steering wheel heavier to turn. Decelerate as much as possible before turning off the engine.
Situations when it is necessary to contact dealers before towing The following may indicate a problem with your transmission. Contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional or commercial towing service before towing. ● The engine is running but the vehicle does not move.
Page 480
8-2. Steps to take in an emergency Towing with a wheel-lift type truck From the front From the rear Use a towing dolly under the rear Use a towing dolly under the wheels. front wheels. Using a flatbed truck If your vehicle is transported by a flatbed truck, it should be tied down at the locations shown in the illustration.
Page 481
8-2. Steps to take in an emergency Emergency towing If a tow truck is not available in an emergency, your vehicle may be temporarily towed using cables or chains secured to the emergency towing hooks. This should only be attempted on hard surfaced roads for at most 80 km (50 miles) at under 30 km/h (18 mph).
Page 482
8-2. Steps to take in an emergency ■ While towing If the engine is not running, the power assist for the brakes and steering will not function, making steering and braking more difficult. WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ■...
Page 483
8-2. Steps to take in an emergency NOTICE ■ To prevent damage to the vehicle when towing using a wheel-lift type truck ● Do not tow the vehicle from the rear when the engine switch is in the “LOCK” position or the key is removed (vehicles without smart entry & start system) or the engine switch is turned to off (vehicles with smart entry &...
If you think something is wrong If you notice any of the following symptoms, your vehicle proba- bly needs adjustment or repair. Contact any authorized Toyota dealer or repairer, or another duly qualified and equipped pro- fessional as soon as possible.
8-2. Steps to take in an emergency Fuel pump shut off system (gasoline engine only) To minimize the risk of fuel leakage when the engine stalls or when an airbag inflates upon collision, the fuel pump shut off system stops the supply of fuel to the engine. Follow the procedure below to restart the engine after the system is activated.
Replace it with a new one as soon as possible after using it. ● Use a genuine Toyota fire extinguisher when replacing. If a non-genuine Toyota fire extinguisher is used, it may not be possible to secure the fire extinguisher properly and it may come loose. ∗...
However, if this continues to occur, have the vehicle inspected by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. Warning light and warning buzzer list...
Page 488
• The boost pressure in the turbocharger is abnormally high. (diesel engine) • Malfunction in DPF system. (if equipped) → Have the vehicle inspected by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional immediately. SRS warning light Indicates a malfunction in: •...
Page 489
Indicates a malfunction in the four-wheel drive system when the light flashes rapidly and a buzzer does not sound. → Have the vehicle inspected by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional immediately. Low speed four-wheel drive indicator light (if equipped) Indicates a malfunction in the four-wheel drive system when the light flashes rapidly.
Page 490
→ Release the accelerator or brake pedal. Indicates a malfunction in the Brake Override System if the warning light flashes → Have the vehicle inspected by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional immediately.
Page 491
Indicates a malfunction in the Stop & Start system (The Stop & Start cancel indicator will come on when the system is canceled: →P. 280) → Have the vehicle inspected by any authorized Toyota (Flashes) dealer or repairer, or another duly qualified and equipped professional immediately.
Page 492
8-2. Steps to take in an emergency : The buzzer sounds if the vehicle reaches a speed of 5 km/h (3 mph). : Slow down until the lamp goes off. : The buzzer sounds when the differential oil temperature is too high and turning the front-wheel drive control switch to H2 is required.
Page 493
If the fuel tank is empty, refuel the vehicle imme- diately. The malfunction indicator lamp will go off after several trips. If the malfunction indicator lamp does not go off, contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional as soon as possible. WARNING ■...
Follow the instructions of the message on the multi-information display. If any of the warning lights comes on again after the following actions have been performed, contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional.
Page 495
The warning lights and warning buzzers operate as follows depending on the content of the message. If a message indicates the need for inspection by a dealer, have the vehicle inspected by any authorized Toyota dealer or repairer, or another duly qualified and equipped pro- fessional immediately. System...
Page 496
The engine oil is scheduled to be changed. Check and change the engine oil, and oil filter by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. After changing the engine oil, the oil change system should be reset. (→P. 434) ■...
Page 497
The warning message will disappear when regeneration is completed. How- ever, if this driving cannot be carried out, or if the message does not disap- pear even after driving, have the vehicle inspected by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional imme- diately.
Page 498
If “VISIT YOUR DEALER”/“Visit your dealer” is shown on the multi-infor- mation display The system or part shown on the multi-information display is malfunctioning. Have the vehicle inspected by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional immediately. ■...
Page 499
8-2. Steps to take in an emergency WARNING ■ If a warning light comes on or a warning buzzer sounds Check and follow the message shown on the multi-information display. Fail- ure to do so may result in death or serious injury. NOTICE ■...
Your vehicle is not equipped with a spare tire. If your have a flat tire, we recommend having your vehicle towed by any authorized Toyota dealer or repairer, or another duly quali- fied and equipped professional or a commercial towing service.
Page 501
8-2. Steps to take in an emergency Location of the jack and tools Single-cab models The jack and tools are stored behind the seat. Smart-cab models The jack and tools are stored under the lid. Double-cab models The jack and tools are stored under the bottom cushion.
Page 502
8-2. Steps to take in an emergency WARNING ■ Using the tire jack Improper use of the tire jack may cause the vehicle to suddenly fall off the jack, leading to death or serious injury. ● Do not use the tire jack for any purpose other than replacing tires or install- ing and removing tire chains.
Page 503
8-2. Steps to take in an emergency Taking out the jack and tool bag Single-cab models Unhook the strap and take out the tool bag. Take out the jack. For loosening For tightening...
Page 504
8-2. Steps to take in an emergency Smart-cab models Vehicles with rear seat cushions: Remove the rear seat cushions. (→P. 172) Pull the tag and open the lid. Unhook the strap and take out the tool bag. Take out the jack. For loosening For tightening...
Page 505
8-2. Steps to take in an emergency Double-cab models Tumbling the bottom cushion (→P. 172) Open the lid. Take out the tool bag. Take out the jack. For loosening For tightening...
Page 506
8-2. Steps to take in an emergency Taking out the spare tire Assemble the jack handle end, jack handle extensions and wheel nut wrench. To assemble the jack handle extension and wheel nut wrench, push in the projection on the jack handle extension.
Page 507
8-2. Steps to take in an emergency Replacing a flat tire Chock the tires. Flat tire Wheel chock positions Left-hand side Behind the rear right-hand side tire Front Right-hand side Behind the rear left-hand side tire Left-hand side In front of the front right-hand side tire Rear Right-hand side In front of the front left-hand side tire...
Page 508
8-2. Steps to take in an emergency Type C Slightly loosen the wheel nuts (one turn). Assembling the jack handle. (→P. 506) Position the jack at the jack points as shown. Front Under the cross member...
Page 509
8-2. Steps to take in an emergency Rear Under the rear axle housing Raise the vehicle until the tire is slightly raised off the ground. When positioning the jack under the rear axle housing, make sure the groove on the top of the jack fits with the rear axle housing.
Page 510
• If there are any cracks or deformations in the bolt screws, nut threads or bolt holes of the wheel, have the vehicle inspected by any authorized Toyota dealer or repairer, or another duly qualified and equipped profes- sional. • When installing the wheel nuts, be sure to install them with the tapered...
Page 511
8-2. Steps to take in an emergency Installing the spare tire Remove any dirt or foreign mat- ter from the wheel contact sur- face. If foreign matter is on the wheel contact surface, the wheel nuts may loosen while the vehicle is in motion, causing the tire to come off.
Page 512
8-2. Steps to take in an emergency Lower the vehicle. Firmly tighten each wheel nut two or three times in the order shown in the illustration. Tightening torque: 105 N•m (10.7 kgf•m, 77 ft•lbf) Vehicles with spare tire of the same wheel type as the installed tires: Reinstall the wheel ornament.
Page 513
8-2. Steps to take in an emergency Type C Stowing the flat tire, jack and all tools Lay down the tire with the outer side facing up, and hook the holding bracket as shown in the illustration. Raise the tire. After the tire goes half way up, check that the suspended chain is able to enter the tire hole, for...
Page 514
8-2. Steps to take in an emergency ■ Certification for the jack...
Page 515
8-2. Steps to take in an emergency WARNING ■ After using the tools and jack Before driving, make sure all the tools and jack are securely in place in their storage location to reduce the possibility of personal injury during a collision or sudden braking.
8-2. Steps to take in an emergency If the engine will not start If the engine will not start even though correct starting proce- dures are being followed (→P. 215, 219), consider each of the following points: The engine will not start even though the starter motor operates normally.
● There may be a malfunction in the steering lock system. (vehicles with smart entry & start system) Contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional if the problem cannot be repaired, or if repair procedures are unknown.
(a sys- tem to prevent accidental operation of the shift lever). Have the vehicle inspected by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional immediately.
8-2. Steps to take in an emergency If the electronic key does not operate properly (vehicles with smart entry & start system) If communication between the electronic key and vehicle is interrupted (→P. 157) or the electronic key cannot be used because the battery is depleted, the smart entry &...
Page 520
A message indicating how to start the engine will be displayed on the multi-information display. Press the engine switch. In the event that the engine still cannot be started, contact any autho- rized Toyota dealer or repairer, or another duly qualified and equipped professional.
Page 521
A message indicating how to start the engine will be displayed on the multi-information display. Press the engine switch. In the event that the engine still cannot be started, contact any autho- rized Toyota dealer or repairer, or another duly qualified and equipped professional.
Page 522
8-2. Steps to take in an emergency ■ Stopping the engine Vehicles with automatic transmission Shift the shift lever to P and press the engine switch as you normally do when stopping the engine. Vehicles with manual transmission Shift the shift lever to N and press the engine switch as you normally do when stopping the engine.
If the vehicle battery is discharged The following procedures may be used to start the engine if the vehicle’s battery is discharged. You can also call any authorized Toyota dealer or repairer, or another duly qualified and equipped professional or a qualified repair shop.
Page 524
8-2. Steps to take in an emergency 1GD-FTV and 2GD-FTV engines 2KD-FTV engine...
Page 525
When the battery is removed or discharged ● Information stored in the ECU is cleared. When the battery is depleted, have the vehicle inspected at any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. ● The power windows may not close normally. In this case, initialize the power windows.
Page 526
Also, battery performance may decrease and the engine may not be able to restart. Contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. ● For details, consult any authorized Toyota dealer or repairer, or another duly qualified and equipped professional.
Page 527
8-2. Steps to take in an emergency WARNING ■ When removing the battery terminals Always remove the negative (-) terminal first. If the positive (+) terminal con- tacts any metal in the surrounding area when the positive (+) terminal is removed, a spark may occur, leading to a fire in addition to electrical shocks and death or serious injury.
Page 528
When the vent plug and indicator are close to the hold down bracket, the battery fluid (sulfuric acid) may leak. ● For information regarding battery replacement, contact any authorized Toyota dealer or repairer, or another duly qualified and equipped profes- sional. ■ To prevent damage to the vehicle (vehicles with manual transmission) Do not pull- or push-start the vehicle as the three-way catalytic converter or catalytic converter may overheat and become a fire hazard.
After the engine has cooled down sufficiently, inspect the hoses and radiator core (radiator) for any leaks. Radiator Cooling fan If a large amount of coolant leaks, immediately contact any authorized Toyota dealer or repairer, or another duly quali- fied and equipped professional.
Page 530
8-2. Steps to take in an emergency The coolant level is satisfactory if it is between the “F” and “L” lines on the reservoir. Reservoir “F” line “L” line Radiator cap (if equipped) Gasoline engine Diesel engine Add engine coolant if necessary. (→P. 552) Water can be used in an emergency if engine coolant is unavailable.
Page 531
Stop the engine immediately and contact any authorized Toyota dealer or repairer, or another duly qualified and equipped profes- sional. If the fan is operating: Have the vehicle inspected at the nearest authorized Toyota dealer or repairer, or another duly qualified and equipped professional. WARNING ■...
10 seconds and try steps again. If the engine still does not start, contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. After starting the engine, depress the accelerator pedal lightly until the engine runs smoothly.
8-2. Steps to take in an emergency If the vehicle becomes stuck Carry out the following procedures if the tires spin or the vehicle becomes stuck in mud, dirt or snow: Stop the engine. Set the parking brake and shift the shift lever to P (automatic transmission) or N (manual transmission).
Page 534
8-2. Steps to take in an emergency WARNING ■ When attempting to free a stuck vehicle If you choose to push the vehicle back and forth to free it, make sure the surrounding area is clear to avoid striking other vehicles, objects or people. The vehicle may also lunge forward or lunge back suddenly as it becomes free.
9-1. Specifications Maintenance data (fuel, oil level, etc.) Dimensions 5265 mm (207.3 in.) Without rear bumper 5285 mm (208.1 in.) Overall length 5335 mm (210.0 in.) With rear bumper 5330 mm (209.8 in.) 1800 mm (70.9 in.) Without over fender 1815 mm (71.5 in.) Overall width With over fender...
Page 537
9-1. Specifications Weights ∗ 3080 kg (6790 lb.) models Single-cab models 2950 kg (6504 lb.) Runner 3150 kg (6945 lb.) models Smart-cab models Gross vehicle mass 3000 kg (6614 lb.) Runner 2910 kg (6415 lb.) models Double- 3210 kg (7077 lb.) 2810 kg (6195 lb.) models Runner...
Page 538
: Except for EURO V models for Turkey : EURO V is an emission standard. If it is not clear that your vehicle meets relevant standards, contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional.
Page 539
The vehicle identification number (VIN) is the legal identifier for your vehicle. This is the primary identification number for your Toyota. It is used in registering the ownership of your vehicle. This number is stamped on the rear right frame.
Page 540
9-1. Specifications Double-cab models (models made in South Africa This number is also on the manufacturer’s label. Models made in Thailand This number is also on the manufacturer’s plate. Models for model code destina- tion V This number is also on the top left of the instrument panel.
Page 541
9-1. Specifications Engine number ■ The engine number is stamped on the engine block as shown. 2TR-FE engine 1GD-FTV 2GD-FTV engines 2KD-FTV engine Engine 2TR-FE engine Model 2TR-FE Type 4 cylinder in line, 4 cycle, gasoline × × Bore and stroke 95.0 95.0 mm (3.74 3.74 in.)
Page 542
9-1. Specifications 1GD-FTV engine Model 1GD-FTV 4 cylinder in line, 4 cycle, diesel Type (with turbocharger) × × Bore and stroke 92.0 103.6 mm (3.62 4.08 in.) Displacement 2755 cm (168.1 cu.in.) Valve clearance Automatic adjustment (engine cold) Drive belt tension Automatic adjustment 2GD-FTV engine Model...
Page 543
9-1. Specifications Fuel Gasoline engine Fuel type Unleaded gasoline only Research Octane 91 or higher Number Fuel tank capacity 80 L (21.1 gal., 17.6 Imp.gal.) (Reference) Diesel engine EU area Diesel fuel conforming to European standard EN590 Except EU area (except Russia and models for model code destination V and Blank Diesel fuel that contains 50 ppm or less of sulfur Fuel type...
Engine oil selection ■ “Toyota Genuine Motor Oil” is used in your Toyota vehicle. Use Toyota approved “Toyota Genuine Motor Oil” or equivalent to satisfy the following grade and viscosity. Oil grade: 0W-20, 5W-20, 5W-30 and 10W-30: API grade SL “Energy-Conserving”, SM “Energy-Conserving”...
Page 545
9-1. Specifications Oil viscosity (0W-20 is explained here as an example): • The 0W in 0W-20 indicates the characteristic of the oil which allows cold startability. Oils with a lower value before the W allow for easier starting of the engine in cold weather. •...
Page 546
Engine oil selection ■ “Toyota Genuine Motor Oil” is used in your Toyota vehicle. Use Toyota approved “Toyota Genuine Motor Oil” or equivalent to satisfy the following grade and viscosity. Oil grade: 0W-20, 5W-20, 5W-30 and 10W-30: API grade SL “Energy-Conserving”, SM “Energy-Conserving”...
Page 547
9-1. Specifications Oil viscosity (0W-20 is explained here as an example): • The 0W in 0W-20 indicates the characteristic of the oil which allows cold startability. Oils with a lower value before the W allow for easier starting of the engine in cold weather. •...
Page 548
Engine oil selection ■ “Toyota Genuine Motor Oil” is used in your Toyota vehicle. Toyota recommends the use of approved “Toyota Genuine Motor Oil”. Another motor oil of matching quality can also be used.
Page 549
9-1. Specifications Recommended viscosity (SAE): SAE 0W-30 is filled into your Toyota vehicle at manufactur- ing, and the best choice for Preferred good fuel economy and good starting in cold weather. Temperature range anticipated before next oil change Oil viscosity (0W-30 is explained here as an example): •...
Page 550
Engine oil selection ■ “Toyota Genuine Motor Oil” is used in your Toyota vehicle. Use Toyota approved “Toyota Genuine Motor Oil” or equivalent to sat- isfy the following grade and viscosity. Oil grade: API CF-4, CF or ACEA B1...
Page 551
Engine oil selection ■ “Toyota Genuine Motor Oil” is used in your Toyota vehicle. Use Toyota approved “Toyota Genuine Motor Oil” or equivalent to satisfy the following grade and viscosity. Oil grade: API CF-4, CF or ACEA B1 (You may also use API CE or CD.)
Do not use plain water alone. : EURO IV and V are emission standards. If it is not clear that your vehicle meets relevant standards, contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. Ignition system (gasoline engine)
NOTICE ■ Automatic transmission fluid type Using transmission fluid other than “Toyota Genuine ATF WS” may cause deterioration in shift quality, locking up of your transmission accompanied by vibration, and ultimately damage the transmission of your vehicle.
Page 554
Recommended oil viscosity SAE 75W : Your Toyota vehicle is filled with “Toyota Genuine Transfer Gear oil LF” at the factory. Use Toyota approved “Toyota Genuine Transfer Gear oil LF” or an equivalent oil of matching quality that satisfies the above specifications.
Page 555
LT 75W-85 GL-5 or equivalent : Your Toyota vehicle is filled with “Toyota Genuine Differential Gear Oil” at the factory. Use Toyota approved “Toyota Genuine Differential Gear Oil” or an equivalent oil of matching quality that satisfies the above specifications.
Page 556
9-1. Specifications Brakes Without 91 mm (3.6 in.) Left-hand 92 mm (3.6 in.) Pedal drive vehicles clearance With VSC 91 mm (3.6 in.) Right-hand drive vehicles 90 mm (3.5 in.) 1.0 6.0 mm Pedal free play (0.04 0.24 in.) 7 ...
Page 557
9-1. Specifications Steering Free play Less than 30 mm (1.2 in.) ® Power steering fluid type Automatic transmission fluid DEXRON II or III Tires and wheels 16 inch tires Tire size 205R16C 8PR 110/108S Rear wheel Rear wheel Tire inflation Front wheel (unladen) (full load)
Page 558
9-1. Specifications 17 inch tires (type B) Tire size 265/65R17 112S Tire inflation Rear wheel Rear wheel pressure Front wheel kPa (unladen) (full load) (Recommended (kgf/cm or bar, kPa (kgf/cm kPa (kgf/cm cold tire inflation psi) bar, psi) bar, psi) pressure) Without stop &...
Page 559
9-1. Specifications Light bulbs Light bulbs Type Headlights High/low beams (halogen headlights) 60/55 High beams (LED headlights) Front fog lights Front position lights (halogen headlights) Without daytime running lights With daytime running lights 21/5 Front turn signal lights Exterior Halogen headlights LED headlights Rear turn signal lights Back-up lights...
9-1. Specifications Fuel information ◆ Gasoline engine Your vehicle must only use unleaded gasoline. For optimum engine performance, select unleaded gasoline with a Research Octane Number of 91 or higher. ◆ Diesel engine EU area: Your vehicle must use only diesel fuel conforming to European standard EN590.
Page 561
“B30” or “B100” and fuel containing a large amount of FAME should not be used. The use of these fuels will damage the vehicle’s fuel system. In case of any doubt, ask any authorized Toyota dealer or repairer, or another duly qualified and equipped professional.
Page 562
You must ensure that refueling is carried out only from a source where fuel specification and quality can be guaranteed. In case of any doubt, ask any authorized Toyota dealer or repairer, or another duly qualified and equipped professional.
The settings of these features can be changed using the multi-information display or at any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. Some function settings are changed simultaneously with other func- tions being customized.
Page 564
Customizable features Settings that can be changed using the multi-information display Settings that can be changed by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional Definition of symbols: O = Available, – = Not available Gauges, meters and multi-information display (→P.
Page 565
9-2. Customization Vehicles with multi-information display type B Customized Function Default setting setting German French Spanish Italian Russian Language English – Turkish Thai Portuguese Indonesian Arabic km (km/L) Units km (L/100 km) – miles (MPG) Eco Driving Indicator – Light (Self-lighting) Drive Desired status...
Page 566
9-2. Customization Customized Function Default setting setting Fuel consumption 10.0 — comparison Fuel price — (Baht) Saving Currency — (Rupiah) (No currency unit) (Euro) : For details about each function: →P. 117, 120 : The default setting and the customized setting items that can be displayed vary according to country.
Page 567
— O unlocking function : If equipped : Setting that can be changed manually (→P. 148) or at any authorized Toyota dealer or repairer, or another duly qualified and equipped profes- sional Smart entry & start system (→P. 154) ■...
Page 568
9-2. Customization WARNING ■ During customization As the engine needs to be running during customization, ensure that the vehicle is parked in a place with adequate ventilation. In a closed area such as a garage, exhaust gases including harmful carbon monoxide (CO) may collect and enter the vehicle.
9-3. Initialization Item to initialize The following item must be initialized for normal system opera- tion after such cases as the battery is reconnected, or mainte- nance is performed on the vehicle. Item When to initialize Reference Engine oil maintenance data After changing engine oil P.
Index What to do if... (Troubleshooting) .....572 Alphabetical index ......576 For vehicles with navigation system or multimedia system, refer to the “Navigation and multimedia system Owner’s manual” for information regarding the equipment listed below. • Navigation system • Audio system •...
Page 572
You lose your keys ● If you lose your keys, new genuine keys can be made by any authorized Toyota dealer or repairer, or another duly qualified and equipped profes- sional. (→P. 136) ● Vehicles with smart entry & start system: If you lose your electronic keys, the risk of vehicle theft increases signifi- cantly.
Page 573
What to do if... (Troubleshooting) If you think something is wrong The engine does not start (vehicles without smart entry & start system) ● Vehicles with manual transmission: Do you turn the key with the clutch pedal depressed firmly? (→P. 215) ●...
Page 574
What to do if... (Troubleshooting) The steering wheel cannot be turned after the engine is stopped ● Vehicles without smart entry & start system: It is locked to prevent theft of the vehicle if the key is removed from the engine switch.
Page 575
What to do if... (Troubleshooting) A warning buzzer sounds when leaving the vehicle (vehicles with smart entry & start system) ● Is the message displayed on the multi-information display? Check the message on the multi-information display. A warning light turns on or a warning message is displayed ●...
Alphabetical index Alphabetical index Modification and disposal of airbags ....51 A/C........384, 390 Side airbag operating Air conditioning filter....450 conditions ......53 Automatic air conditioning Side airbag precautions ..49 system ........ 390 Side and curtain shield Manual air conditioning airbags operating system ........
Page 577
Alphabetical index Automatic air conditioning Making a call......371 system Managing speed dials... 371 Air conditioning filter....450 Managing the contacts..366 Automatic air conditioning Phone settings ...... 362 system ........ 390 Receiving a call..... 373 Automatic disconnecting Speaking on the phone..371 differential ......
Page 578
Alphabetical index Child safety ........ 64 Airbag precautions ....47 DAC........... 298 Battery precautions ..440, 527 Daytime running light Child restraint system .....65 system........244 How your child should Deck hooks ......408 wear the seat belt ....42 Defogger Installing child restraints..80, 88 Outside rear view...
Page 579
Alphabetical index Engine “ACC” position ...... 216 Eco Driving Indicator..109, 110 Compartment ......429 Emergency flashers....476 Engine switch....215, 219 Electronic key Hood ........427 If the electronic key does How to start the not operate properly ... 519 engine......
Page 580
Alphabetical index Engine switch Front seats (ignition switch).....215, 219 Adjustment......170 Auto power off function ..223 Cleaning........ 419 Changing the engine Correct driving posture ... 38 switch modes...... 222 Head restraints ..... 175 Changing the engine Seat heaters ......397 switch position ....
Page 581
Alphabetical index Gas station information ..588 Identification Gauges........112 Engine........541 Glove box ......... 402 Vehicle ........539 Grocery bag hooks ....413 Ignition switch (engine switch)......215, 219 Auto power off function ..223 Changing the engine Hands-free system switch modes......
Page 582
Alphabetical index Light bulbs Replacing......460 Keyless entry Wattage ........ 559 Smart entry & start system..144 Lock steering column ..217, 224 Wireless remote control ..134 Keys .......... 132 Electronic key......132 Engine switch......215 Maintenance If the electronic key does Do-it-yourself maintenance...
Page 583
Alphabetical index Odometer........113 Radiator ........436 Radio ........318 Differential oil ......555 Radio data system ....320 Engine oil ......548 ......... 320 Manual transmission oil ..554 Rear differential lock Transfer oil ......554 system........276 Opener Rear fog light Fuel filler door .......
Page 584
Alphabetical index Shift lever Automatic transmission..227 Seat belts........40 If the shift lever cannot be Adjusting the seat belt.....41 shifted from P ..... 518 Child restraint system Manual transmission..... 233 installation......65 Shift lock system ..... 518 Cleaning and maintaining the Side airbags .......
Page 585
Alphabetical index Stuck If your vehicle becomes Tachometer ......113 stuck ........533 Tailgate ........151 Sun visors ........ 409 Tail lights Switch Light switch ......241 Audio remote control Replacing light bulbs..... 471 switches ......312 Wattage ........ 559 Cruise control switch.....
Page 586
Alphabetical index TRC (Traction Control) .... 290 Warning lights Trip information ....118, 122 ABS........488 Trip meters ....... 113 Brake Override system ..490 Turn signal lights Brake system ......487 Replacing light Charging system....487 bulbs ....465, 471, 473 Electronic engine control Turn signal lever ....
Page 587
Alphabetical index Window glasses....... 184 Window lock switch....185 Windows Power windows ..... 184 Rear window defogger ..... 385, 392 Washer........249 Windshield wipers Intermittent windshield wipers ......... 249 Winter driving tips ....305 Wireless communication ..349 Wireless remote control key ..........
GAS STATION INFORMATION Auxiliary catch lever Fuel filler door P. 427 P. 254 Hood lock release Fuel filler door Tire inflation pressure lever opener P. 427 P. 254 P. 557 Fuel tank capacity (Reference) 80 L (21.1 gal., 17.6 Imp.gal.) Fuel type P.