Page 1 Pictorial index Search by illustration For safety Make sure to read through them and security Instrument How to read the gauges and meters, the variety of cluster warning lights and indicators, etc. Operation of Opening and closing the doors and windows, each adjustment before driving, etc.
Page 2: Table Of Contents
TABLE OF CONTENTS For your information....... 8 Operation of each Reading this manual ....12 component How to search......13 3-1. Key information Pictorial index ......14 Keys........118 For safety and security 3-2. Opening, closing and locking the doors Side doors ......
Page 3 4-5. Using the driving Driving support systems Cruise control ....218 4-1. Before driving Rear view monitor system ......222 Driving the vehicle..... 166 Driving assist systems ..232 Cargo and luggage.... 175 4-6. Driving tips Vehicle load limits ..... 179 Hybrid vehicle driving Trailer towing.....
Page 4 TABLE OF CONTENTS ® 5-5. Using the radio 5-9. Bluetooth Audio (Multimedia system) (Multimedia system) ® Radio operation....264 Listening to Bluetooth 5-6. Playing an audio CD and Audio ....... 295 ® MP3/WMA/AAC discs 5-10. Bluetooth phone (Multimedia system) (Multimedia system) ®...
Page 5 Interior features Maintenance and care 6-1. Using the air conditioning 7-1. Maintenance and care system and defogger Cleaning and protecting Automatic air conditioning the vehicle exterior ..366 system......340 Cleaning and protecting Seat heaters...... 348 the vehicle interior ... 369 6-2.
Page 6 TABLE OF CONTENTS When trouble arises Vehicle specifications 8-1. Essential information 9-1. Specifications Emergency flashers ..430 Maintenance data (fuel, oil level, etc.) ..490 If your vehicle has to be Fuel information....499 stopped in an emergency ...... 431 Tire information....
Page 7 Index What to do if... (Troubleshooting) ....536 Alphabetical index...... 541 For vehicles with a navigation system, refer to the “NAVIGATION SYSTEM OWNER’S MANUAL” for information regarding the navi- gation system. I n f o r ma t i o n P r o v i d e d b y :...
Page 8: For Your Information
Accessories, spare parts and modification of your Toyota A wide variety of non-genuine spare parts and accessories for Toyota vehi- cles are currently available on the market. You should know that Toyota does not warrant these products and is not responsible for their performance, repair, or replacement, or for any damage they may cause to, or adverse effect they may have on, your Toyota vehicle.
Page 9 ● Seat belt pretensioner system Be sure to check with your Toyota dealer for precautionary measures or spe- cial instructions regarding installation of a mobile two-way radio system. High voltage parts and cables on the hybrid vehicles emit approximately the...
Page 10: Event Data Recorder
EDR. ● Disclosure of the EDR data Toyota will not disclose the data recorded in an EDR to a third party except when: • An agreement from the vehicle’s owner (or the lessee for a leased vehi- cle) is obtained •...
Page 11 Be sure to have the systems of the SRS airbag and seat belt pretensioner removed and disposed of by a qualified service shop or by your Toyota dealer before you scrap your vehicle.
Page 12: Reading This Manual
Reading this manual WARNING: Explains something that, if not obeyed, could cause death or serious injury to people. NOTICE: Explains something that, if not obeyed, could cause damage to or a malfunction in the vehicle or its equipment. 1 2 3 Indicates operating or working procedures.
Page 13: How To Search
How to search Searching by name ■ • Alphabetical index ..P. 541 Searching installation ■ position • Pictorial index....P. 14 Searching by symptom or ■ sound • What to do if... (Troubleshooting) ..P. 536 Searching by title ■ • Table of contents .....P. 2 I n f o r ma t i o n P r o v i d e d b y :...
Page 14: Pictorial Index
Pictorial index Pictorial index ■ Exterior Doors ......... . . P. 124 Locking/unlocking .
Page 15 Pictorial index Windshield wipers ....... . . P. 207 Precautions against winter season ..... P. 241 Fuel filler door .
Page 16: Instrument Panel
Pictorial index ■ Instrument panel Engine/“POWER” switch ..... . P. 182, 186 Starting the hybrid system/changing the modes ..P. 182, 186 Emergency stop of the hybrid system .
Page 17 Pictorial index Turn signal lever ........P. 199 Headlight switch .
Page 18 Pictorial index ■ Switches Type A Type B Outside rear view mirror switches ....P. 156 Instrument panel light control dial ..... P. 92 Window lock switch.
Page 19 Pictorial index Audio remote control switches ..... P. 249 Climate remote control switches ..... P. 344 “DISP”...
Page 20 Pictorial index Seat heater switches ......P. 348 VSC OFF switch ........P. 233 Eco drive mode switch .
Page 21 Pictorial index ■ Interior SRS airbags ........P. 37 Floor mats.
Page 22 Pictorial index Inside rear view mirror ......P. 155 Sun visors ........P. 357 Vanity mirrors.
Page 23 For safety and security 1-1. For safe use Before driving...... 24 For safety drive ....26 Seat belts ......28 SRS airbags......37 Front passenger occupant classification system ..50 Safety information for children ......56 Child restraint systems..57 Installing child restraints..
Page 24: 1-1. For Safe Use
1-1. For safe use Before driving Floor mat Use only floor mats designed specifically for vehicles of the same model and model year as your vehicle. Fix them securely in place onto the carpet. Insert the retaining hooks (clips) into the floor mat eyelets. Turn the upper knob of each retaining hook (clip) to secure the floor mats in place.
Page 25 When installing the driver's floor mat ■ ● Do not use floor mats designed for other models or different model year vehicles, even if they are Toyota Genuine floor mats. ● Only use floor mats designed for the driver's seat. ●...
Page 26: For Safety Drive
1-1. For safe use For safety drive For safe driving, adjust the seat and mirror to an appropriate position before driving. Correct driving posture Adjust the angle of the seat- back so that you are sitting straight up and so that you do not have to lean forward to steer.
Page 27: Adjusting The Mirrors
1-1. For safe use Adjusting the mirrors Make sure that you can see backward clearly by adjusting the inside and outside rear view mirrors properly. (P. 155, 156) WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ●...
Page 28: Seat Belts
1-1. For safe use Seat belts Make sure that all occupants are wearing their seat belts before driving the vehicle. Correct use of the seat belts ● Extend the shoulder belt so that it comes fully over the shoulder, but does not come into contact with the neck or slide off the shoulder.
Page 29 1-1. For safe use Rear center seat belt Fastening the seat belt ■ The rear center seat belt is a 3-point type restraint with 2 buckles. Both seat belt buckles must be correctly located and securely latched for proper operation. Push the tabs back all the way into the cover and then remove the tabs.
Page 30 1-1. For safe use Releasing the seat belt ■ Release the rear center seat belt only when necessary, such as when folding down the rear seat. For safety, always store the plate in the designated place after releasing it. To release tab “A”, press the release button.
Page 31 1-1. For safe use Holding tab “A” and “B” together, insert both tabs all the way into the cover on the roof. With tab “B” inserted all the way into the cover, move tab “A” slightly back toward the cover’s inlet, so that it blocks the inlet.
Page 32 1-1. For safe use Seat belt pretensioners (front seats) The pretensioners help the seat belts to quickly restrain the occu- pants by retracting the seat belts when the vehicle is subjected to certain types of severe frontal or side collision. The pretensioners do not activate in the event of a minor frontal impact, a minor side impact, a rear...
Page 33 Each seat belt should be used by one person only. Do not use a seat belt for more than one person at once, including children. ● Toyota recommends that children be seated in the rear seat and always use a seat belt and/or an appropriate child restraint system. ●...
Page 34 If the pretensioner has activated, the SRS warning light will come on. In that case, the seat belt cannot be used again and must be replaced at your Toyota dealer. I n f o r ma t i o n P r o v i d e d b y :...
Page 35 ● Ensure that the belt and plate are locked and the belt is not twisted. If the seat belt does not function correctly, immediately contact your Toyota dealer. ● Replace the seat assembly, including the belts, if your vehicle has been involved in a serious accident, even if there’s no obvious damage.
Page 36 1-1. For safe use WARNING Using a seat belt extender ■ ● Do not wear the seat belt extender if you can fasten the seat belt without the extender. ● Do not use the seat belt extender when installing a child restraint system because the belt will not securely hold the child restraint system, increas- ing the risk of death or serious injury in the event of an accident.
Page 37: Srs Airbags
1-1. For safe use SRS airbags The SRS airbags inflate when the vehicle is subjected to certain types of severe impacts that may cause significant injury to the occupants. They work together with the seat belts to help reduce the risk of death or serious injury. ◆...
Page 38 1-1. For safe use ◆ SRS side and curtain shield airbags SRS front side airbags Can help protect the torso of the front seat occupants. SRS curtain shield airbags Can help protect primarily the head of occupants in the outer seats.
Page 39 1-1. For safe use SRS airbag system components Curtain shield airbags Driver’s seat cushion airbag SRS warning light and “AIR Side impact sensors (front) BAG ON” and “AIR BAG OFF” Seat belt pretensioners and indicator lights force limiters Front side airbags Side impact sensors (front Side impact sensors (rear) door)
Page 40 1-1. For safe use Your vehicle is equipped with ADVANCED AIRBAGS designed based on the US motor vehicle safety standards (FMVSS208). The airbag sensor assembly (ECU) controls airbag deployment based on infor- mation obtained from the sensors etc. shown in the system compo- nents diagram above.
Page 41 An infant or child who is too small to use a seat belt should be properly secured using a child restraint sys- tem. Toyota strongly recommends that all infants and children be placed in the rear seats of the vehicle and properly restrained. The rear seats are safer for infants and children than the front passenger seat.
Page 42 1-1. For safe use WARNING SRS airbag precautions ■ ● Do not allow a child to stand in front of the SRS front passenger airbag unit or sit on the knees of a front passenger. ● Do not allow the front seat occupants to hold items on their knees.
Page 43 1-1. For safe use WARNING SRS airbag precautions ■ ● Do not attach anything to areas such as a door, windshield glass, side door glass, front or rear pillar, roof side rail and assist grip. ● Vehicles without a smart key system: Do not attach any heavy, sharp or hard objects such as keys and accessories to the key.
Page 44 Modification and disposal of SRS airbag system components ■ Do not dispose of your vehicle or perform any of the following modifications without consulting your Toyota dealer. The SRS airbags may malfunction or deploy (inflate) accidentally, causing death or serious injury. ●...
Page 45 1-1. For safe use If the SRS airbags deploy (inflate) ■ ● Bruising, burns or slight abrasions may result from contact with a deploying (inflating) SRS airbag. ● A loud noise and white powder will be emitted. ● Parts of the airbag module (steering wheel hub, airbag cover and inflator) as well as the front seats, parts of the front and rear pillars, and roof side rails, may be hot for several minutes.
Page 46 1-1. For safe use SRS airbag deployment conditions (SRS side and curtain shield airbags) ■ ● The SRS side and curtain shield airbags will deploy in the event of an impact that exceeds the set threshold level (the level of force corresponding to the impact force produced by an approximately 3300 lb.
Page 47 1-1. For safe use Types of collisions that may not deploy the SRS airbags (SRS side and ■ curtain shield airbags) The SRS side and curtain shield airbags may not activate if the vehicle is subjected to a collision from the side at certain angles, or a collision to the side of the vehicle body other than the passenger compartment.
Page 48 1-1. For safe use When to contact your Toyota dealer ■ In the following cases, the vehicle will require inspection and/or repair. Con- tact your Toyota dealer as soon as possible. ● Any of the SRS airbags have been inflated. ●...
Page 49 1-1. For safe use ● The portion of the front pillars, rear pil- lars or roof side rail garnishes (padding) containing the curtain shield airbags inside is scratched, cracked, or other- wise damaged. I n f o r ma t i o n P r o v i d e d b y :...
Page 50: Front Passenger Occupant Classification System
1-1. For safe use Front passenger occupant classification system Your vehicle is equipped with a front passenger occupant classi- fication system. This system detects the conditions of the front passenger seat and activates or deactivates the devices for the front passenger. SRS warning light “AIR BAG OFF”...
Page 51 1-1. For safe use Condition and operation in the front passenger occupant classi- fication system Adult ■ “AIR BAG ON” and “AIR BAG OFF” “AIR BAG ON” indicator lights Indicator/ SRS warning light warning light Seat belt reminder light flashing Front passenger airbag Side airbag on the front passenger seat Activated...
Page 52 1-1. For safe use Child ■ “AIR BAG “AIR BAG ON” and “AIR BAG OFF” OFF” or indicator lights “AIR BAG ON” Indicator/ warning light SRS warning light Seat belt reminder light flashing Deactivated or Front passenger airbag activated Side airbag on the front passenger seat Activated Curtain shield airbag in the front...
Page 53 1-1. For safe use Unoccupied ■ “AIR BAG ON” and “AIR BAG OFF” “AIR BAG OFF” indicator lights Indicator/ SRS warning light warning light Seat belt reminder light Front passenger airbag Deactivated Side airbag on the front passenger seat Activated Curtain shield airbag in the front passenger side Devices...
Page 54 1-1. For safe use : The system judges a person of adult size as an adult. When a smaller adult sits in the front passenger seat, the system may not recognize him/ her as an adult depending on his/her physique and posture. : In the event the front passenger is wearing a seat belt.
Page 55 Do not kick the front passenger seat or subject it to severe impact. Other- wise, the SRS warning light may come on to indicate a malfunction of the detection system. In this case, contact your Toyota dealer immediately. ● Child restraint systems installed on the rear seat should not contact the front seatbacks.
Page 56: Safety Information For Children
1-1. For safe use Safety information for children Observe the following precautions when children are in the vehi- cle. Use a child restraint system appropriate for the child, until the child becomes large enough to properly wear the vehicle’s seat belt.
Page 57: Child Restraint Systems
1-1. For safe use Child restraint systems A child restraint system for a small child or baby must itself be properly restrained on the seat with the LATCH anchors or the lap portion of the lap/shoulder belt. The laws of all 50 states of the U.S.A. and Canada now require the use of child restraint systems.
Page 58 1-1. For safe use Types of child restraints Child restraint systems are classified into the following 3 types according to the age and size of the child:  Rear facing — Infant seat/con-  Forward facing — Convertible vertible seat seat Booster seat ...
Page 59 ● Toyota strongly urges the use of a proper child restraint system that con- forms to the size of the child, installed on the rear seat. According to acci- dent statistics, the child is safer when properly restrained in the rear seat than in the front seat.
Page 60 1-1. For safe use WARNING Child restraint precautions ■ ● Do not allow the child to lean his/her head or any part of his/her body against the door or the area of the seat, front and rear pillars or roof side rails from which the SRS side airbags or SRS curtain shield airbags deploy even if the child is seated in the child restraint system.
Page 61: Installing Child Restraints
1-1. For safe use Installing child restraints Follow the child restraint system manufacturer’s instructions. Firmly secure child restraints to the rear seats using the LATCH anchors or a seat belt. Attach the top tether strap when installing a child restraint. The lap/shoulder belt can be used if your child restraint system is not compatible with the LATCH (Lower Anchors and Tethers for Children) system.
Page 62 1-1. For safe use Installation with LATCH system Type A  Widen the gap in the seat cushion slightly. Latch the hooks of the lower straps onto LATCH anchors. If the child restraint has a top tether strap, the top tether strap should be latched onto the top tether strap anchor.
Page 63 1-1. For safe use Type B  Widen the gap in the seat cushion slightly. Latch the buckles onto the LATCH anchors. If the child restraint has a top tether strap, the top tether strap should be latched onto the top tether strap anchor.
Page 64 1-1. For safe use Run the seat belt through the child restraint system and insert the plate into the buckle. Make sure that the belt is not twisted. Fully extend the shoulder belt and allow it to retract to put it in lock mode.
Page 65 1-1. For safe use Forward facing  Convertible seat ■ Rear center seat: Adjust the head restraint to the upmost posi-  tion. ( P. 150) Place the child restraint sys- tem on the seat facing the front of the vehicle. Run the seat belt through the child restraint system and insert the plate into the...
Page 66 1-1. For safe use While pushing child restraint system into the rear seat, allow the shoulder belt to retract until the child restraint system is securely in place. After the shoulder belt has retracted to a point where there is no slack in the belt, pull the belt to check that it cannot be extended.
Page 67 1-1. For safe use Removing a child restraint installed with a seat belt Push the buckle release button and fully retract the seat belt. Child restraint systems with a top tether strap Remove the luggage cover (if equipped). (P. 362) Remove the head restraint (P.
Page 68 1-1. For safe use WARNING When installing a booster seat ■ To prevent the belt from going into ALR lock mode, do not fully extend the shoulder belt. ALR mode causes the belt to tighten only. This could cause injury or discomfort to the child. (P. 32) When installing a child restraint system ■...
Page 69 1-1. For safe use WARNING When installing a child restraint system ■ ● Shake the child restraint system left and right, and forward and backward to ensure that it has been securely installed. ● After securing a child restraint system, never adjust the seat. ●...
Page 70: Exhaust Gas Precautions
Keep the back door closed. ● If you smell exhaust gases in the vehicle even when the back door is closed, open the windows and have the vehicle inspected at your Toyota dealer as soon as possible. When parking ■...
Page 71: Hybrid System
1-2. Hybrid system Hybrid system features Your vehicle is a hybrid vehicle. It has characteristics different from conventional vehicles. Be sure you are closely familiar with the characteristics of your vehicle, and operate it with care. The hybrid system combines the use of a gasoline engine and an electric motor (traction motor) according to driving condi- tions, improving fuel efficiency and reducing exhaust emis- sions.
Page 72 1-2. Hybrid system ◆ When stopped/during start off The gasoline engine stops* when the vehicle is stopped. During start-off, the electric motor (traction motor) drives the vehicle. At slow speeds or when traveling down a gentle slope, the engine is stopped* and the motor is used.
Page 73 1-2. Hybrid system Regenerative braking ■ In the following situations, kinetic energy is converted to electric energy and deceleration force can be obtained in conjunction with the recharging of the hybrid battery (traction battery). ● The accelerator pedal is released with the shift lever in D or B. ●...
Page 74 30 minutes or 10 miles (16 km). If the hybrid battery (traction battery) becomes fully discharged and you are unable to start the hybrid system, contact your Toyota dealer. Charging the 12-volt battery ■...
Page 75 When in the area surrounding the rear of the vehicle, rather than in front of the vehicle Maintenance, repair, recycling, and disposal ■ Contact your Toyota dealer regarding maintenance, repair, recycling and dis- posal. Do not dispose of the vehicle yourself. Customization that can be configured at Toyota dealer ■...
Page 76: Hybrid System Precautions
1-2. Hybrid system Hybrid system precautions Take care when handling the hybrid system, as it is a high volt- age system (about 520 V at maximum) as well as contains parts that become extremely hot when the hybrid system is operating. Obey the warning labels attached to the vehicle.
Page 77 If the emergency shut off system activates, your vehicle will not restart. To restart the hybrid system, contact your Toyota dealer. Hybrid warning message A message is automatically displayed when a malfunction occurs in the hybrid system or an improper operation is attempted.
Page 78 ■ volt battery has been disconnected The hybrid system may not start. In this case, try to start the system again. If the “READY” indicator does not come on, contact your Toyota dealer. Running out of fuel ■ When the vehicle has run out of fuel and the hybrid system cannot be started, refuel the vehicle with at least enough gasoline to make the low fuel level warning light (P.
Page 79 1-2. Hybrid system WARNING High voltage and high temperature precautions ■ This vehicle has high voltage DC and AC systems as well as a 12-volt sys- tem. DC and AC high voltage is very dangerous and can cause severe burns and electric shock that may result in death or serious injury. ●...
Page 80 1-2. Hybrid system WARNING Road accident cautions ■ Observe the following precautions to reduce the risk of death or serious injury: ● Pull your vehicle off the road, apply the parking brake, shift the shift lever to P, and turn the hybrid system off. ●...
Page 81 Toyota dealer or a qualified service shop. If the hybrid battery is not dis- posed of properly, it may cause electric shock that can result in death or serious injury.
Page 82: 1-3. Theft Deterrent System
1-3. Theft deterrent system  Immobilizer system The vehicle’s keys have built-in transponder chips that prevent the hybrid system from starting if a key has not been previously registered in the vehicle’s on-board computer. Never leave the keys inside the vehicle when you leave the vehi- cle.
Page 83 1-3. Theft deterrent system Certifications for the immobilizer system ■  For vehicles sold in the U.S.A. and Puerto rico FCC ID: NI4TMIMB-3 FCC ID: MOZRI-42BTY This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interfer- ence, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 84: Theft Prevention Labels
1-3. Theft deterrent system Theft prevention labels These labels are attached to the vehicle to reduce vehicle theft by facilitating the tracing and recov- ery of parts from stolen vehicles. Do not remove under penalty of law. I n f o r ma t i o n P r o v i d e d b y :...
Page 85 Instrument cluster Instrument cluster Warning lights and indicators ......86 Gauges and meters .... 91 Multi-information display ..94 Energy monitor/ consumption screen..107 I n f o r ma t i o n P r o v i d e d b y :...
Page 86: Warning Lights And Indicators
2. Instrument cluster Warning lights and indicators The warning lights and indicators on the instrument cluster inform the driver of the status of the vehicle’s various systems. For the purpose of explanation, the following illustration dis- plays all warning lights and indicators illuminated. I n f o r ma t i o n P r o v i d e d b y :...
Page 87 2. Instrument cluster Warning lights Warning lights inform the driver of malfunctions in any of the vehicle's systems. Brake system warning ABS warning light light (P. 441) (P. 442) (U.S.A.) (Canada) Electric power steering Brake system warning system warning light light (P.
Page 88 They will turn off after the hybrid system is on, or after a few seconds. There may be a malfunction in a system if the lights do not come on, or turn off. Have the vehicle inspected by your Toyota dealer.
Page 89: Indicators
They will turn off after the hybrid system is on, or after a few seconds. There may be a malfunction in a system if the lights do not come on, or turn off. Have the vehicle inspected by your Toyota dealer.
Page 90 Have the vehicle inspected by your Toyota dealer immediately if this occurs.
Page 91: Gauges And Meters
2. Instrument cluster Gauges and meters Speedometer Displays the vehicle speed. Shift position display Displays the selected shift position. (P. 196) Fuel gauge Displays the quantity of fuel remaining in the tank. Multi-information display Presents the driver with a variety of driving-related data. (P. 94) I n f o r ma t i o n P r o v i d e d b y :...
Page 92: Instrument Panel Light Control
2. Instrument cluster Instrument panel light control The brightness of the instrument panel lights can be adjusted by turn- ing the dial. Brighter Darker The meters and multi-information display illuminate when ■  Vehicles without a smart key system The engine switch is in the “ON” position. ...
Page 93 2. Instrument cluster NOTICE To prevent damage to the engine and its components ■ This vehicle is not installed with an engine coolant temperature gauge. Instead, is shown on the multi-information display. The engine may be overheating if is shown on the multi-information display. In this case, immediately stop the vehicle in a safe place.
Page 94: Multi-Information Display
2. Instrument cluster Multi-information display Display contents The multi-information display presents the driver with a variety of driv- ing-related data including the current outside air temperature. ● Drive information Displays information such as the hybrid system operating condi- tions and fuel consumption. ●...
Page 95 2. Instrument cluster Touch tracer display (if equipped) When a steering wheel switch is touched, an illustration of the switch is shown on the screen, helping the driver to confirm which switch they are touching without needing to look down at their hands.
Page 96 2. Instrument cluster Items displayed in the upper part of the screen The following items are always displayed in the upper part of the screen. (When using some menu items, these items will not be dis- played.) Odometer/trip meter P. 97 Average fuel consumption Depending whether...
Page 97 2. Instrument cluster Odometer/trip meter ■ Each time the “TRIP” switch is pressed, the display changes as fol- lows: Odometer Displays the total distance that the vehicle has been driven. On some models, pressing and holding the “TRIP” switch while the odometer is dis- played will switch the speed- ometer display between MPH and km/h.
Page 98 2. Instrument cluster Switching menu screens Each time the “DISP” switch is pressed, the menu screen changes. When the desired menu screen is displayed, stop pressing the “DISP” switch. The details screen will soon be displayed. However, to display the “Settings & Screen Off” details screen, press and hold the “DISP”...
Page 99 2. Instrument cluster “ECO Savings” If the price of gasoline is input, the cost of the consumed fuel according to the driven distance is displayed. If the fuel consumption comparison is set, the difference between the input fuel consumption and your vehicle's actual fuel consumption is expressed as an amount of money that was possibly saved.
Page 100 2. Instrument cluster Cruising range Displays the estimated maximum distance that can be driven with the quantity of fuel remaining. • This distance is computed based on your average fuel consumption. As a result, the actual distance that can be driven may differ from that displayed.
Page 101 2. Instrument cluster “ECO Savings” ■ Basic display Detailed display With 2 types of displays available, the cost of the consumed fuel can be displayed or the fuel consumption's comparison can be dis- played. Switching between basic display and detailed display can be performed on the screen settings screen.
Page 102 2. Instrument cluster “ECO Savings Record” ■ If the fuel consumption compar- ison is input in “ECO Savings”, the savings history will be dis- played. If the fuel consumption comparison is not input, fuel cost history will be displayed. Fuel costs for the current month, the last 3 months and the same month last year are displayed, enabling a compari-...
Page 103 2. Instrument cluster Screen settings If “Settings & Screen Off” is selected on the menu screen, the follow- ing items can be set. Always perform this operation after stopping the vehicle in a safe place. (Some items cannot be set while driving.) Press the “DISP”...
Page 104 2. Instrument cluster “ECO savings” settings ■ The gasoline price and fuel consumption comparison settings can be set, and the screen settings can be changed between basic and detailed. ● To input the gasoline price, press the “DISP” (to increase) or “TRIP”...
Page 105 2. Instrument cluster Screen off ■ The screen can be turned off. The upper part of the screen is always displayed and cannot be turned off. Trip summary display When the hybrid system is turned off, drive information data since the system was started is dis- played after the ending animation.
Page 106 2. Instrument cluster When disconnecting and reconnecting 12-volt battery terminals ■ The following information data will be reset: ● Clock ● Past record (aside from the top 3 results) ● Average fuel consumption ● Cruising range ● Average vehicle speed ●...
Page 107: Energy Monitor/Consumption Screen
2. Instrument cluster Energy monitor/consumption screen You can view the status of your hybrid system on the multi-infor- mation display and audio system. Audio system Multi-information display I n f o r ma t i o n P r o v i d e d b y :...
Page 108 2. Instrument cluster Energy monitor Multimedia system  Press the “CAR” button. If the “Trip Information” or “Past Record” screen is displayed, touch “Energy”.  Navigation system Press the “APPS” button. Touch “Eco” on the “Apps” screen. If the “Trip Information” or “Past Record”...
Page 109 2. Instrument cluster Multi-information Audio system display When the vehicle is powered by the electric motor (traction motor) When the vehicle is powered by the gasoline engine When the vehicle is powered by both the gasoline engine and the electric motor (traction motor) When the vehicle is charging the hybrid battery (traction battery) I n f o r ma t i o n P r o v i d e d b y :...
Page 110 2. Instrument cluster Multi-information Audio system display When there is no energy flow Hybrid battery (traction battery) status Full Full These images are examples only, and may vary slightly from actual conditions. I n f o r ma t i o n P r o v i d e d b y :...
Page 111: Trip Information
2. Instrument cluster Fuel consumption screen (audio system) Trip information ■  Multimedia system Press the “CAR” button. (P. 108) If the “Energy Monitor” or “Past Record” screen is displayed, touch “Trip Information”.  Navigation system Press the “APPS” button. (P. 108) Touch “Eco”...
Page 112 2. Instrument cluster Past record ■  Multimedia system Press the “CAR” button. (P. 108) If the “Energy Monitor” or “Trip Information” screen is displayed, touch “Past Record”. Navigation system  Press the “APPS” button. (P. 108) Touch “Eco” on the “Apps” screen. If the “Energy Monitor”...
Page 113 2. Instrument cluster Fuel consumption screen (Multi-information display) There are 2 menu items available for the fuel consumption screen. After pressing the “DISP” switch, select one of the menu items below and the system will change to the details screen. The “5min Consumption”, “Past Record”...
Page 114 2. Instrument cluster “Past Record” ■ There are 2 types of displays for the past record. Personal best and monthly average can be changed between on the settings screen. (P. 115) Personal Best Displays the best 3 fuel consumption records and the current fuel consumption ranking.
Page 115 2. Instrument cluster Remaining hybrid battery (traction battery) charge display ■ The charge amount of the hybrid battery (traction battery) is automatically controlled by the hybrid system. For this reason, even if electricity is recov- ered via the regenerative braking, or electricity is generated via the gasoline engine, the displayed hybrid battery (traction battery) charge amount may not reach the highest level (level 8).
Page 116 2. Instrument cluster I n f o r ma t i o n P r o v i d e d b y :...
Page 117: Operation Of Each Component
Operation of each component 3-1. Key information Keys ........118 3-2. Opening, closing and locking the doors Side doors......124 Back door......133 Smart key system ..... 138 3-3. Adjusting the seats Front seats ......145 Rear seats......146 Head restraints....150 3-4.
Page 118: 3-1. Key Information
3-1. Key information Keys The keys The following keys are provided with the vehicle.  Type A  Type B Type C  Master keys Operating the wireless remote control function Valet key Electronic keys • Operating the smart key system •...
Page 119 3-1. Key information Wireless remote control (if equipped) Vehicles without a smart key Vehicles with a smart key sys-   system Locks all the doors (P. 125) Unlocks all the doors (P. 125) Sounds the alarm (press and hold) (P. 120) Using the mechanical key (vehicles with a smart key system) To take out the mechanical key, slide the release lever and take...
Page 120 If you lose your keys ■ New genuine keys can be made by your Toyota dealer using the other keys (including mechanical key) and the key number stamped on your key number plate. Keep the plate in a safe place such as your wallet, not in the vehicle.
Page 121 If a wrong key is used (vehicles with a smart key system) ■ The key cylinder rotates freely to isolate inside mechanism. Customization that can be configured at Toyota dealer ■ Settings (e.g. wireless remote control system) can be changed.
Page 122 3-1. Key information Certification for wireless remote control ■  For vehicles sold in the U.S.A. and Puerto rico FCC ID: HYQ23AAC FCC ID: HYQ12BDM NOTE: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interfer- ence, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 123 ■ If the key remains lost, the risk of vehicle theft increases significantly. Visit your Toyota dealer immediately with all remaining electronic keys that was provided with your vehicle. I n f o r ma t i o n P r o v i d e d b y :...
Page 124: 3-2. Opening, Closing And Locking The Doors
3-2. Opening, closing and locking the doors Side doors Unlocking and locking the doors from the outside ◆ Entry function (if equipped) Carry the electronic key to enable this function. Grip the driver's door handle to unlock the door. (Grip the passenger's door handle to unlock all the doors.) Make sure to touch the sensor...
Page 125 3-2. Opening, closing and locking the doors ◆ Wireless remote control  Vehicles without a smart key  Vehicles with a smart key sys- system Locks all the doors Check that the door is securely locked. Unlocks all the doors Pressing the button unlocks the driver’s door.
Page 126 3-2. Opening, closing and locking the doors Operation signals ■  Vehicles without a smart key system The emergency flashers flash to indicate that the doors have been locked/ unlocked. (Locked: once; Unlocked: twice)  Vehicles with a smart key system A buzzer sounds and the emergency flashers flash to indicate that the doors have been locked/unlocked.
Page 127 3-2. Opening, closing and locking the doors Unlocking and locking the doors from the inside ◆ Door lock switch Locks all the doors Unlocks all the doors ◆ Inside lock buttons Locks the door Unlocks the door The front doors can be opened by pulling the inside handle even if the lock buttons are in the lock position.
Page 128 3-2. Opening, closing and locking the doors Rear door child-protector lock The door cannot be opened from inside the vehicle when the lock is set. Unlock Lock These locks can be set to prevent children from opening the rear doors. Push down on each rear door switch to lock both rear doors.
Page 129 3-2. Opening, closing and locking the doors Automatic door locking and unlocking systems The following functions can be set or canceled: Function Operation Shift position linked door Shifting the shift lever out of P locks all doors. locking function Shift position linked door Shifting the shift lever to P unlocks all doors.
Page 130 3-2. Opening, closing and locking the doors Shift the shift lever to P or N, and press and hold the door lock switch ( ) for about seconds then release. The shift position corresponding to the desired function to be set are shown as follows.
Page 131 3-2. Opening, closing and locking the doors Switching the door unlock function (vehicles with a smart key system) ■ It is possible to set which doors the entry function unlocks using the wireless remote control. Turn the “POWER” switch off. When the indicator light on the key surface is not on, press and hold for about 5 seconds while pressing and holding The setting changes each time an operation is performed, as shown below.
Page 132 3-2. Opening, closing and locking the doors Customization that can be configured at Toyota dealer ■ Settings (e.g. unlocking function using a key) can be changed. (Customizable features P. 514) WARNING To prevent an accident ■ Observe the following precautions while driving the vehicle.
Page 133: Back Door
3-2. Opening, closing and locking the doors Back door The back door can be locked/unlocked and opened by the fol- lowing procedures. Locking and unlocking the back door Wireless remote control ■ P. 125 Door lock switches ■ P. 127 Entry function (if equipped) ■...
Page 134 3-2. Opening, closing and locking the doors When closing the back door Lower the back door using the back door handle, and make sure to push the back door down from the outside to close it. Luggage compartment light ■ The luggage compartment light turns on when the back door is opened.
Page 135 3-2. Opening, closing and locking the doors WARNING When children are in the vehicle ■ Observe the following precautions. Failure to do so may result in death or serious injury. ● Do not allow children to play in the luggage compartment. If a child is accidentally locked in the luggage compartment, they could have heat exhaustion or other injuries.
Page 136 When installing an accessory part to the back door, using a genuine Toyota part is recommended. I n f o r ma t i o n P r o v i d e d b y :...
Page 137 Do not touch the damper stay rod with gloves or other fabric items. ● Do not attach any accessories other than genuine Toyota parts to the back door. ● Do not place your hand on the damper stay or apply lateral forces to it.
Page 138: Smart Key System
3-2. Opening, closing and locking the doors  Smart key system The following operations can be performed simply by carrying the electronic key on your person, for example in your pocket. The driver should always carry the electronic key. ● Unlocks and locks the side doors (P. 124) ●...
Page 139 3-2. Opening, closing and locking the doors Alarms and warning indicators ■ A combination of exterior and interior alarms as well as warning messages shown on the multi-information display is used to prevent theft of the vehicle and accidents resulting from erroneous operation. Take appropriate mea- sures in response to any warning message on the multi-information display.
Page 140 3-2. Opening, closing and locking the doors Conditions affecting operation ■ The smart key system uses weak radio waves. In the following situations, the communication between the electronic key and the vehicle may be affected, preventing the smart key system, wireless remote control and immobilizer system from operating properly.
Page 141 3-2. Opening, closing and locking the doors Notes for the entry function ■ ● Even when the electronic key is within the effective range (detection areas), the system may not operate properly in the following cases: • The electronic key is too close to the window or outside door handle, near the ground, or in a high place when the doors are locked or unlocked.
Page 142 To prevent theft of the vehicle, do not leave the electronic key within 6 ft. (2 m) of the vehicle. ● The smart key system can be deactivated in advance. Ask your Toyota dealer for details. To operate the smart key system properly ■...
Page 143 3-2. Opening, closing and locking the doors Certification for the smart key system ■  For vehicles sold in the U.S.A. and Puerto rico FCC ID: HYQ23AAB FCC ID: HYQ14FBA NOTE: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interfer- ence, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 144 (P. 138) The radio waves may affect the operation of such devices. If necessary, the entry function can be disabled. Ask your Toyota dealer for details, such as the frequency of radio waves and timing of the emitted radio waves.
Page 145: Adjusting The Seats
3-3. Adjusting the seats Front seats Seat position adjustment lever Seatback angle adjustment lever Vertical height adjustment lever (if equipped) WARNING When adjusting the seat position ■ ● Take care when adjusting the seat position to ensure that other passen- gers are not injured by the moving seat.
Page 146: Rear Seats
3-3. Adjusting the seats Rear seats The seatbacks of the rear seats can be folded down. Folding down the rear seatbacks Before folding down the rear seatbacks ■ Stow the rear seat belt buck- les as shown. Stow the seat belts. Center ...
Page 147 3-3. Adjusting the seats Folding down rear seatbacks ■  Vehicles with a split rear seats Pull the seatback lock release knob and fold the seatback down. Each seatback may be folded separately. Vehicles with a non-split rear seat  Pull both seatback lock release knobs at the same time and fold the seatback down.
Page 148 3-3. Adjusting the seats WARNING When folding the rear seatbacks down ■ Observe the following precautions. Failure to do so may result in death or serious injury. ● Do not fold the seatbacks down while driving. ● Stop the vehicle on level ground, set the parking brake and shift the shift lever to P.
Page 149 3-3. Adjusting the seats WARNING After returning the rear seatback to the upright position ■ Observe the following precautions. Failure to do so may result in death or serious injury. ● Make sure that the seatback is securely locked in position by lightly pushing it back and forth.
Page 150: Head Restraints
3-3. Adjusting the seats Head restraints Head restraints are provided for all seats.  Vehicles with adjustable type head restraints Pull the head restraint up. Down Push the head restraint down while pushing the lock release button. Lock release button Removing the head restraints ■...
Page 151 3-3. Adjusting the seats Pull the head restraint up while press- ing the lock release button. Lock release buttons Installing the head restraints ■  Front adjustable and rear center head restraints Align the head restraint with installation holes and push it down to the lock posi- tion.
Page 152 3-3. Adjusting the seats Adjusting the height of the head restraints (vehicles with adjustable type ■ head restraints) Make sure that the head restraints are adjusted so that the center of the head restraint is closest to the top of your ears. Adjusting the rear center seat head restraints ■...
Page 153: Adjusting The Steering Wheel And Mirrors
3-4. Adjusting the steering wheel and mirrors Steering wheel Adjustment procedure Hold the steering wheel and push the lever down. Adjust to the ideal position by moving the steering wheel hori- zontally and vertically. After adjustment, pull the lever up to secure the steering wheel.
Page 154 3-4. Adjusting the steering wheel and mirrors WARNING Caution while driving ■ Do not adjust the steering wheel while driving. Doing so may cause the driver to mishandle the vehicle and cause an acci- dent, resulting in death or serious injury. After adjusting the steering wheel ■...
Page 155: Inside Rear View Mirror
3-4. Adjusting the steering wheel and mirrors Inside rear view mirror The rear view mirror’s position can be adjusted to enable suffi- cient confirmation of the rear view. Adjusting the height of rear view mirror The height of the rear view mirror can be adjusted to suit your driving posture.
Page 156: Outside Rear View Mirrors
3-4. Adjusting the steering wheel and mirrors Outside rear view mirrors Adjustment procedure To select a mirror to adjust, press the switch. Left Right To adjust the mirror, press the switch. Right Down Left Folding the mirrors Push the mirror back in the direc- tion of the vehicle’s rear.
Page 157 3-4. Adjusting the steering wheel and mirrors Mirror angle can be adjusted when ■  Vehicles without a smart key system The engine switch is in the “ACC” or “ON” position.  Vehicles with a smart key system The “POWER” switch is in ACCESSORY or ON mode. When the mirrors are fogged up (vehicles with outside rear view mirror ■...
Page 158: 3-5. Opening And Closing The Windows
3-5. Opening and closing the windows  Power windows Opening and closing procedures The power windows can be opened and closed using the switches. Operating the switch moves the windows as follows: Closing One-touch closing (driver’s win- dow only)* Opening One-touch opening (driver’s...
Page 159 3-5. Opening and closing the windows The power windows can be operated when ■  Vehicles without a smart key system The engine switch is in the “ON” position.  Vehicles with a smart key system The “POWER” switch is in ON mode. Operating the power windows after turning the hybrid system off ■...
Page 160 If the window continues to close but then re-open slightly even after perform- ing the above procedure correctly, have the vehicle inspected by your Toyota dealer. I n f o r ma t i o n P r o v i d e d b y :...
Page 161 3-5. Opening and closing the windows WARNING Observe the following precautions. Failure to do so may result in death or serious injury. Closing the windows ■ ● The driver is responsible for all the power window operations, including the operation for the passengers. In order to prevent accidental operation, especially by a child, do not let a child operate the power windows.
Page 162: Moon Roof
3-5. Opening and closing the windows  Moon roof Use the overhead switches to open and close the moon roof and tilt it up and down. Opening and closing Opens the moon roof The moon roof stops slightly before the fully open position to reduce wind noise.
Page 163 If the moon roof does not fully close even after performing the above proce- dure correctly, have the vehicle inspected by your Toyota dealer. Moon roof open reminder function ■...
Page 164 3-5. Opening and closing the windows WARNING Observe the following precautions. Failure to do so may cause death or serious injury. Opening the moon roof ■ ● Do not allow any passengers to put their hands or heads outside the vehi- cle while it is moving.
Page 165: Driving
Driving 4-1. Before driving 4-3. Operating the lights and wipers Driving the vehicle..... 166 Headlight switch....201 Cargo and luggage ... 175 Fog light switch ....205 Vehicle load limits ..... 179 Windshield wipers and Trailer towing..... 180 washer ......207 Dinghy towing ....
Page 166: Driving The Vehicle
4-1. Before driving Driving the vehicle The following procedures should be observed to ensure safe driving: Starting the hybrid system  P. 182, 186 Driving With the brake pedal depressed, shift the shift lever to D. (P. 196) Release the parking brake. (P. 200) Gradually release the brake pedal and gently depress the accelera- tor pedal to accelerate the vehicle.
Page 167 4-1. Before driving Starting off on a steep uphill Make sure that the parking brake is set and shift the shift lever to D. Gently depress the accelerator pedal. Release the parking brake. When starting off on a uphill ■ The hill-start assist control will activate.
Page 168 4-1. Before driving Breaking in your new Toyota ■ To extend the life of the vehicle, observing the following precautions is recom- mended: ● For the first 200 miles (300 km): Avoid sudden stops. ● For the first 1000 miles (1600 km): •...
Page 169 4-1. Before driving WARNING Observe the following precautions. Failure to do so may result in death or serious injury. When driving the vehicle ■ ● During normal driving, do not turn off the hybrid system. Turning the hybrid system off while driving will not cause loss of steering or braking control, however, power assist to the steering will be lost.
Page 170 If you hear a squealing or scraping noise (brake pad wear limit indica- ■ tors) Have the brake pads checked and replaced by your Toyota dealer as soon as possible. Rotor damage may result if the pads are not replaced when needed.
Page 171 4-1. Before driving WARNING Observe the following precautions. Failure to do so may result in death or serious injury. When the vehicle is stopped ■ ● Do not depress the accelerator pedal unnecessarily. If the shift lever is in any position other than P or N, the vehicle may accel- erate suddenly and unexpectedly, causing an accident.
Page 172 4-1. Before driving WARNING Observe the following precautions. Failure to do so may result in death or serious injury. When the vehicle is parked ■ ● Do not leave glasses, cigarette lighters, spray cans, or soft drink cans in the vehicle when it is in the sun. Doing so may result in the following: •...
Page 173 4-1. Before driving WARNING Observe the following precautions. Failure to do so may result in death or serious injury. When taking a nap in the vehicle ■ Always turn the hybrid system off. Otherwise, if you accidentally move the shift lever or depress the accelerator pedal, this could cause an accident or fire due to hybrid system overheating.
Page 174 Short in electrical components ● Engine damage caused by water immersion In the event that you drive on a flooded road and the vehicle is flooded, be sure to have your Toyota dealer check the following: ● Brake function ●...
Page 175: Cargo And Luggage
(P. 179) Toyota does not recommend towing a trailer with your vehicle. Your vehicle is not designed for trailer towing. I n f o r ma t i o n P r o v i d e d b y :...
Page 176 4-1. Before driving Calculation formula for your vehicle Cargo capacity Total load capacity (vehicle capacity weight) (P. 490) When 2 people with the combined weight of A lb. (kg) are riding in your vehicle, which has a total load capacity (vehicle capacity weight) of B lb.
Page 177 4-1. Before driving As shown in the example above, if the number of occupants increases, the cargo and luggage load will be reduced by an amount that equals the increased weight due to the additional occupants. In other words, if an increase in the number of occupants causes an excess of the total load capacity (combined weight of occupants plus cargo and luggage load), you must reduce the cargo and luggage on your vehicle.
Page 178 4-1. Before driving WARNING Capacity and distribution ■ ● Do not exceed the maximum axle weight rating or the total vehicle weight rating. ● Even if the total load of occupant's weight and the cargo load is less than the total load capacity, do not apply the load unevenly. Improper loading may cause deterioration of steering or braking control which may cause death or serious injury.
Page 179: Vehicle Load Limits
Seating capacity means the maximum number of occupants whose estimated average weight is 150 lb. (68 kg) per person. ◆ Towing capacity Toyota does not recommend towing a trailer with your vehicle. ◆ Cargo capacity Cargo capacity may increase or decrease depending on the weight and the number of occupants.
Page 180: Trailer Towing
Trailer towing Toyota does not recommend towing a trailer with your vehicle. Toyota also does not recommend the installation of a tow hitch or the use of a tow hitch carrier for a wheelchair, scooter, bicy- cle, etc. Your vehicle is not designed for trailer towing or for the use of tow hitch mounted carriers.
Page 181: Dinghy Towing
4-1. Before driving Dinghy towing Your vehicle is not designed to be dinghy towed (with 4 wheels on the ground) behind a motor home. NOTICE To avoid serious damage to your vehicle ■ Do not tow your vehicle with the four wheels on the ground. I n f o r ma t i o n P r o v i d e d b y :...
Page 182: 4-2. Driving Procedures
4-2. Driving procedures Engine (ignition) switch (vehicles without a smart key system) Starting the hybrid system Check that the parking brake is set. Check that the shift lever is in P. Firmly depress the brake pedal. Turn the engine switch to the “START”...
Page 183 4-2. Driving procedures Changing the engine switch positions “LOCK” The steering wheel is locked and the key can be removed. (The key can be removed only when the shift lever is in P.) “ACC” Some electrical components such as the power outlet can be used. “ON”...
Page 184 If the “READY” indicator does not come on ■ In the event that the “READY” indicator does not come on even after perform- ing the proper procedures for starting the vehicle, contact your Toyota dealer immediately. If the hybrid system is malfunctioning ■...
Page 185 When starting the hybrid system ■ If the hybrid system becomes difficult to start, have your vehicle checked by your Toyota dealer immediately. I n f o r ma t i o n P r o v i d e d b y :...
Page 186: Power (Ignition) Switch (Vehicles With A
4-2. Driving procedures Power (ignition) switch (vehicles with a smart key system) Performing the following operations when carrying the elec- tronic key on your person starts the hybrid system or changes “POWER” switch modes. Starting the hybrid system Check that the parking brake is set. Check that the shift lever is in P.
Page 187 4-2. Driving procedures Check that the “READY” indicator is illuminated. If the “READY” indicator changes from a flashing light to a solid light and a beep sound, the hybrid system is starting normally. The vehicle will not move when the “READY” indicator is off. The vehicle can move when the “READY”...
Page 188 4-2. Driving procedures When stopping the hybrid system with the shift lever in a posi- tion other than P If the hybrid system is stopped with the shift lever in a position other than P, the “POWER” switch will not be turned off but instead be turned to ACCESSORY mode.
Page 189 If the hybrid system does not start ■ ● The immobilizer system may not have been deactivated. (P. 82) Contact your Toyota dealer. ● Check that the shift lever is securely set in P. The hybrid system may not start if the shift lever is not securely in the P position.
Page 190 If the “READY” indicator does not come on ■ In the event that the “READY” indicator does not come on even after perform- ing the proper procedures for starting the vehicle, contact your Toyota dealer immediately. If the hybrid system is malfunctioning ■...
Page 191 The system may be malfunctioning. Have the vehicle inspected by your Toyota dealer immediately. Failure to do so may lead to the system operat- ing abnormally and possibly cause an accident or damage to the vehicle. Stopping the hybrid system in an emergency ■...
Page 192 Do not depress the accelerator pedal unnecessarily. ● If the hybrid system becomes difficult to start, have your vehicle checked by your Toyota dealer immediately. Symptoms indicating a malfunction with the “POWER” switch ■ If the “POWER” switch seems to be operating somewhat differently than usual, such as the switch sticking slightly, there may be a malfunction.
Page 193: Ev Drive Mode
4-2. Driving procedures EV drive mode In EV drive mode, electric power is supplied by the hybrid bat- tery (traction battery), and only the electric motor (traction motor) is used to drive the vehicle. This mode allows you to drive in residential areas early in the morning and late at night, or in indoor parking lots etc.
Page 194 4-2. Driving procedures Switching to EV drive mode when the gasoline engine is cold ■ If the hybrid system is started while the gasoline engine is cold, the gasoline engine will start automatically after a short period of time in order to warm up. In this case, you will become unable to switch to EV drive mode.
Page 195 4-2. Driving procedures Automatic cancelation of EV drive mode ■ When driving in EV drive mode, the gasoline engine may automatically restart in the following situations. When EV drive mode is canceled, a buzzer will sound and the EV drive mode indicator will flash and go off. ●...
Page 196: Hybrid Transmission
4-2. Driving procedures Hybrid transmission Shifting the shift lever Vehicles without a smart key system: While the engine switch is in the “ON” position, move the shift lever with the brake pedal depressed. Vehicles with a smart key system: While the “POWER” switch is in ON mode, move the shift lever with the brake pedal depressed.
Page 197 4-2. Driving procedures Shift position purpose Shift position Function Parking the vehicle/starting the hybrid system Reversing Neutral Normal driving Position for engine braking : To improve fuel efficiency and reduce noises, set the shift lever in the D position for normal driving. Selecting Eco drive mode Suitable for enhancing the fuel economy, because the torque corre- sponding to the accelerator pedal depression amount can be gener-...
Page 198 4-2. Driving procedures Operation of the air conditioning system in Eco drive mode ■ Eco drive mode controls the heating/cooling operations and fan speed of the air conditioning system to enhance fuel efficiency. (P. 345) To improve air conditioning performance, adjust the temperature setting or fan speed, or turn off Eco drive mode.
Page 199: Turn Signal Lever
4-2. Driving procedures Turn signal lever Operating instructions Right turn Lane change to the right (push and hold the lever partway) The right hand signals will flash until you release the lever. Lane change to the left (push and hold the lever partway) The left hand signals will flash until you release the lever.
Page 200: Parking Brake
4-2. Driving procedures Parking brake Operating instructions To set the parking brake, fully pull the parking brake lever while depressing the brake pedal. To release the parking brake, slightly raise the lever and lower it completely while press- ing the button. U.S.A.
Page 201: 4-3. Operating The Lights And Wipers
4-3. Operating the lights and wipers Headlight switch The headlights can be operated manually. Operating instructions Turning the end of the lever turns on the lights as follows: Type A  daytime running lights turn on. The side marker, park- ing, tail, license plate, daytime running lights instrument...
Page 202 4-3. Operating the lights and wipers Type B  daytime running lights turn on. The side marker, park- ing, tail, license plate, daytime running lights instrument panel lights turn on. The headlights and all lights listed above (except daytime running lights) turn on.
Page 203 4-3. Operating the lights and wipers Daytime running light system ■ ● To make your vehicle more visible to other drivers, the headlights turn on automatically (at a reduced intensity) whenever the hybrid system is started and the parking brake is released. Daytime running lights are not designed for use at night.
Page 204 4-3. Operating the lights and wipers Customization that can be configured at Toyota dealer ■ Setting of the daytime running light system can be changed. (Customizable features: P. 514) NOTICE To prevent 12-volt battery discharge ■ Do not leave the lights on longer than necessary when the hybrid system is off.
Page 205: Fog Light Switch
4-3. Operating the lights and wipers  Fog light switch The fog lights secure excellent visibility in difficult driving con- ditions, such as in rain and fog.  Type A Turns the front fog lights Turns the front fog lights ...
Page 206 4-3. Operating the lights and wipers Type B  Turns the front fog lights Turns the front fog lights Fog lights can be used when ■ The headlights are on in low beam. I n f o r ma t i o n P r o v i d e d b y :...
Page 207: Windshield Wipers And Washer
4-3. Operating the lights and wipers Windshield wipers and washer Operating the wiper lever The wiper operation is selected by moving the lever as follows:  Type A Intermittent windshield wiper operation Low speed windshield wiper operation High speed windshield wiper operation Temporary operation Increases the intermittent wind-...
Page 208 4-3. Operating the lights and wipers Washer/wiper dual operation The wipers will automatically oper- ate a couple of times after the washer squirts.  Type B Intermittent windshield wiper operation Low speed windshield wiper operation High speed windshield wiper operation Temporary operation Increases the intermittent wind- shield wiper frequency...
Page 209 4-3. Operating the lights and wipers Washer/wiper dual operation The wipers will automatically oper- ate a couple of times after the washer squirts. The windshield wipers and washer can be operated when ■  Vehicles without a smart key system The engine switch is in the “ON”...
Page 210 When a nozzle becomes blocked ■ In this case, contact your Toyota dealer. Do not try to clear it with a pin or other object. The nozzle will be damaged. I n f o r ma t i o n P r o v i d e d b y :...
Page 211: Rear Window Wiper And Washer
4-3. Operating the lights and wipers  Rear window wiper and washer Operating the wiper lever The wiper operation is selected by moving the lever as follows:  Type A Intermittent window wiper operation Normal window wiper operation Washer/wiper dual oper- ation Washer/wiper dual oper- ation...
Page 212 4-3. Operating the lights and wipers Type B  Intermittent window wiper operation Normal window wiper operation Washer/wiper dual oper- ation Washer/wiper dual oper- ation The wipers will automatically oper- ate a couple of times after the washer squirts. The rear window wiper and washer can be operated when ■...
Page 213 When a nozzle becomes blocked ■ In this case, contact your Toyota dealer. Do not try to clear it with a pin or other object. The nozzle will be damaged. I n f o r ma t i o n P r o v i d e d b y :...
Page 214: 4-4. Refueling
4-4. Refueling Opening the fuel tank cap Perform the following steps to open the fuel tank cap: Before refueling the vehicle ● Vehicles without a smart key system: Turn the engine switch off and ensure that all the doors and win- dows are closed.
Page 215 4-4. Refueling WARNING When refueling the vehicle ■ Observe the following precautions while refueling the vehicle. Failure to do so may result in death or serious injury. ● After exiting the vehicle and before opening the fuel door, touch an unpainted metal surface to discharge any static electricity.
Page 216 4-4. Refueling Opening the fuel tank cap Pull up the opener to open the fuel filler door. Turn the fuel tank cap slowly to remove it and hang it on the back of the fuel filler door. Closing the fuel tank cap After refueling, turn the fuel tank cap until you hear a click.
Page 217 WARNING When replacing the fuel cap ■ Do not use anything but a genuine Toyota fuel tank cap designed for your vehicle. Doing so may cause a fire or other incident which may result in death or serious injury. I n f o r ma t i o n P r o v i d e d b y :...
Page 218: Using The Driving Support Systems Cruise Control
4-5. Using the driving support systems  Cruise control Summary of functions Use the cruise control to maintain a set speed without depressing the accelerator pedal. Indicators Cruise control switch Setting the vehicle speed Press the “ON-OFF” button to activate the cruise control. Cruise control indicator will come Press the button again to deacti- vate the cruise control.
Page 219 4-5. Using the driving support systems Adjusting the set speed To change the set speed, operate the lever until the desired set speed is obtained. Increases the speed Decreases the speed Fine adjustment: Momentarily move the lever in the desired direc- tion.
Page 220 Have the vehicle inspected by your Toyota dealer. I n f o r ma t i o n P r o v i d e d b y :...
Page 221 4-5. Using the driving support systems WARNING To avoid operating the cruise control by mistake ■ Switch the cruise control off using the “ON-OFF” button when not in use. Situations unsuitable for cruise control ■ Do not use cruise control in any of the following situations. Doing so may result in loss of control and could cause an accident resulting in death or serious injury.
Page 222: Rear View Monitor System
4-5. Using the driving support systems  Rear view monitor system The rear view monitor system assists the driver by displaying guide lines and an image of the view behind the vehicle while backing up, for example while parking. For vehicles with a navigation system, refer to the “NAVIGATION SYSTEM OWNER’S MANUAL”.
Page 223 4-5. Using the driving support systems Using the rear view monitor system Screen description ■ Vehicle width guide lines The line indicates a guide path when the vehicle is being backed straight up. The displayed width is wider than the actual vehicle width. Vehicle center guide line This line indicates the estimated vehicle center on the ground.
Page 224 4-5. Using the driving support systems Rear view monitor system precautions Area displayed on screen ■ The rear view monitor system displays an image of the view from the bumper of the rear area of the vehicle. To adjust the image on the rear view monitor system screen.
Page 225 4-5. Using the driving support systems Rear view monitor system camera ■ The camera for the rear view monitor system located above the license plate. ● Using the camera If the camera lens becomes dirty, it cannot transmit a clear image. If water droplets, snow or mud adhere to the lens, rinse it with water and wipe with a soft cloth.
Page 226 4-5. Using the driving support systems ● When the ground behind the vehicle slopes up sharply The distance guide lines will appear to be closer to the vehi- cle than the actual distance. Because of this, objects will appear to be farther away than they actually are.
Page 227 4-5. Using the driving support systems ● When any part of the vehicle sags When any part of the vehicle sags due to the number of pas- sengers or the distribution of the load, there is a margin of error between the fixed guide lines on the screen and the actual distance/course on the A margin of error...
Page 228 4-5. Using the driving support systems Vehicle width guide lines ■ Visually check the surroundings and the area behind the vehicle. In the case shown below, the truck appears to be outside of the vehi- cle width guide lines and the vehicle does not look as if it hits the truck.
Page 229 If you notice any of the following symptoms, refer to the likely cause and the solution, and re-check. If the symptom is not resolved by the solution, have the vehicle inspected by your Toyota dealer. Likely cause Solution  The image is difficult to see •...
Page 230 4-5. Using the driving support systems WARNING When using the rear view monitor system ■ The rear view monitor system is a supplemental device intended to assist the driver when backing up. When backing up, be sure to visually check all around the vehicle both directly and using the mirrors before proceeding.
Page 231 ● Do not expose the camera to strong impact as this could cause a malfunc- tion. If this happens, have the vehicle inspected by your Toyota dealer as soon as possible. I n f o r ma t i o n P r o v i d e d b y :...
Page 232: Driving Assist Systems
4-5. Using the driving support systems Driving assist systems To help enhance driving safety and performance, the following systems operate automatically in response to various driving situations. Be aware, however, that these systems are supple- mentary and should not be relied upon too heavily when operat- ing the vehicle.
Page 233 TRAC has been disabled even if has not been pressed TRAC and hill-start assist control cannot be operated. Contact your Toyota dealer. I n f o r ma t i o n P r o v i d e d b y :...
Page 234 4-5. Using the driving support systems Sounds and vibrations caused by the ABS, brake assist, TRAC, VSC and ■ hill-start assist control systems Any of the following conditions may occur when the above systems are oper- ating. None of these indicates that a malfunction has occurred. ●...
Page 235 4-5. Using the driving support systems Operating conditions of hill-start assist control ■ When the following four conditions are met, the hill-start assist control will operate: ● The shift lever is in a position other than P or N (when starting off forward/ backward on an upward incline).
Page 236 4-5. Using the driving support systems WARNING The ABS does not operate effectively when ■ ● The limits of tire gripping performance have been exceeded (such as excessively worn tires on a snow covered road). ● The vehicle hydroplanes while driving at high speed on wet or slick roads. Stopping distance when the ABS is operating may exceed that of nor- ■...
Page 237 The ABS, TRAC and VSC systems will not function correctly if different tires are installed on the vehicle. Contact your Toyota dealer for further information when replacing tires or wheels. Handling of tires and the suspension ■...
Page 238: 4-6. Driving Tips
4-6. Driving tips Hybrid vehicle driving tips For economical and ecological driving, pay attention to the fol- lowing points: ◆ Using Eco drive mode When using Eco drive mode, the torque corresponding to the accel- erator pedal depression amount can be generated more smoothly than it is in normal conditions.
Page 239: Air Conditioning
4-6. Driving tips ◆ When braking Make sure to operate the brakes gently and in a timely manner. A greater amount of electrical energy can be regenerated when slow- ing down. ◆ Delays Repeated acceleration and deceleration, as well as long waits at traffic lights, will lead to bad fuel economy.
Page 240 4-6. Driving tips ◆ Luggage Carrying heavy luggage will lead to poor fuel economy. Avoid carry- ing unnecessary luggage. Installing a large roof rack will also cause poor fuel economy. ◆ Warming up before driving Since the gasoline engine starts up and cuts out automatically when cold, warming up the engine is unnecessary.
Page 241: Winter Driving Tips
4-6. Driving tips Winter driving tips Carry out the necessary preparations and inspections before driving the vehicle in winter. Always drive the vehicle in a man- ner appropriate to the prevailing weather conditions. Pre-winter preparations ● Use fluids that are appropriate to the prevailing outside tempera- tures.
Page 242 4-6. Driving tips When parking the vehicle Park the vehicle and move the shift lever to P without setting the park- ing brake. The parking brake may freeze up, preventing it from being released. If necessary, block the wheels to prevent inadvertent sliding or creeping.
Page 243 NOTICE Repairing or replacing snow tires ■ Request repairs or replacement of snow tires from Toyota dealers or legiti- mate tire retailers. This is because the removal and attachment of snow tires affects the opera- tion of the tire pressure warning valves and transmitters.
Page 244: Audio System
Audio system 5-1. Using the audio system Audio system types... 246 5-2. Basic Operations (Multimedia system) Multimedia system .... 247 Steering wheel audio switches ......249 USB port/AUX port.... 250 Basic audio operations..252 5-3. Setup (Multimedia system) Setup menu....... 254 General settings....
Page 245 ® 5-7. Using an external device 5-10. Bluetooth phone (Multimedia system) (Multimedia system) ® Listening to an iPod ..272 Using a Bluetooth Phone ......297 Listening to a USB memory device....277 Making a call ..... 300 Using the AUX port ... 282 Receiving a call....
Page 246: Audio System Types
5-1. Using the audio system Audio system types With Multimedia system  P. 247  With navigation system Owners of models equipped with a navigation system should refer to the “NAVIGATION SYSTEM OWNER’S MANUAL”. I n f o r ma t i o n P r o v i d e d b y :...
Page 247: Basic Operations (Multimedia System)
5-2. Basic Operations (Multimedia system)  Multimedia system Operations such as listening to audio, using the hands-free phone and changing multimedia system settings are started by using the following buttons. Multimedia system operation buttons “CAR” button Press this button to access the energy monitor/ consumption screen.
Page 248 5-2. Basic Operations (Multimedia system) Operating the touch screen By touching the screen with your finger, you can control the multime- dia system, etc. Drag ■ Touch the screen with your finger, and move the screen to the desired position. ●...
Page 249: Steering Wheel Audio Switches
5-2. Basic Operations (Multimedia system) Steering wheel audio switches Some audio features can be controlled using the switches on the steering wheel. Operation may differ depending on the type of audio system or navigation system. For details, refer to the manual provided with the audio system or navigation system.
Page 250: Connecting Using Usb/Aux Port
5-2. Basic Operations (Multimedia system) USB port/AUX port Connect an iPod, USB memory device or portable audio player to the USB/AUX port as indicated below. Select “iPod”, “USB” or “AUX” on the audio source selection screen and the device can be operated via multimedia system.
Page 251 5-2. Basic Operations (Multimedia system) WARNING While driving ■ Do not connect a device or operate the device controls. NOTICE Cord hook ■ Do not secure items other than cords on the cord hook. Doing so may dam- age the cord hook. I n f o r ma t i o n P r o v i d e d b y :...
Page 252: Basic Audio Operations
5-2. Basic Operations (Multimedia system) Basic audio operations Basic audio operations and functions common to each mode are explained in this section. Operating the multimedia system Press this knob to turn the multimedia system on and off, and turn it to adjust the volume. Press the “”...
Page 253: Multimedia System
5-2. Basic Operations (Multimedia system) Random playback Select to change on/off. Repeat play Select to change on/off. Using cellular phones ■ Interference may be heard through the multimedia system's speakers if a cel- lular phone is being used inside or close to the vehicle while the multimedia system is operating.
Page 254: Setup (Multimedia System)
5-3. Setup (Multimedia system) Setup menu You can adjust the multimedia system to your desired settings. Display “Setup” screen Press the “SETUP” button to display the “Setup” screen. Select to adjust the settings for operation sounds, screen ani- mation, etc. (P. 255) Select to set the voice settings.
Page 255: General Settings
The animation effect for the screen can be set to on/off. Select to delete personal data (P. 256) Select to update program versions. For details, contact your Toyota dealer. Select to display the software information. Notices related to third party software used in this product are enlisted. (This includes instructions for obtaining such software, where applicable.)
Page 256 5-3. Setup (Multimedia system) Delete personal data Select “Delete Personal Data” on the “General Settings” screen. Select “Delete”. Check carefully beforehand, as data cannot be retrieved once deleted. A confirmation screen will be displayed. Select “Yes”. The following personal data will be deleted or changed to its default settings.
Page 257: Audio Settings
5-3. Setup (Multimedia system) Audio settings Settings are available for adjusting the radio operation, cover art, etc. Screen for audio settings Press the “SETUP” button. Select “Audio” on the “Setup” screen. Number of Radio Presets Select the number of radio preset stations.
Page 258: Display Settings
5-3. Setup (Multimedia system) Display settings Settings are available for adjusting the contrast and brightness of the screen. Screen for display settings Press the “SETUP” button. Select “Display” on the “Setup” screen. Adjust screen contrast/bright- ness Adjust screen contrast/bright- ness of the rear view monitor camera Changes to day mode.
Page 259: Voice Settings
5-3. Setup (Multimedia system) Voice settings This screen is used for guidance for voice command systems setting. Adjust the voice guidance vol- ume setting. voice recognition prompts “High”, “Low” or “Off”. Set the train voice recognition. Set the voice prompt interrupt on/off.
Page 260: 5-4. Using The Multimedia System
5-4. Using the Multimedia system Selecting the audio source Switching between audio sources such as radio and CD are explained in this section. Changing audio source Press the “AUDIO” button to display the audio source selection screen. If the audio source selection screen is not displayed, press the “AUDIO” button again.
Page 261: List Screen Operation
5-4. Using the Multimedia system List screen operation When a list screen is displayed, use the appropriate buttons to scroll through the list. How to scroll : Select to scroll to the next or previous page. : If appears to the right of titles, the complete titles are too long for the display.
Page 262 5-4. Using the Multimedia system Selecting, fast-forwarding and reversing tracks/files/songs Selecting a track/file/song ■ Press the “” or “” button on “SEEK/TRACK” or turn the “TUNE·SCROLL” knob to select the desired track/file/song number. To fast-forward or reverse, press and hold the “” or “” button on “SEEK/TRACK”.
Page 263: Optimal Use Of The Multimedia System
5-4. Using the Multimedia system Optimal use of the multimedia system On the “Sound Settings” screen, sound quality (Treble/Mid/ Bass), volume balance can be adjusted. How to adjust the sound settings and sound quality 1 2 3 Select “-” or “+” to adjust the treble, mid or bass to a level between -5 and 5.
Page 264: Using The Radio
5-5. Using the radio (Multimedia system) Radio operation Select “AM” or “FM” on the audio source selection screen to begin listening to the radio. Audio control screen Pressing the “AUDIO” button displays the audio control screen from any screens of the selected source. Audio source selection screen appears Preset stations...
Page 265: Multimedia System
5-5. Using the radio (Multimedia system) Setting station presets Search for desired stations by turning the “TUNE·SCROLL” knob or pressing the “” or “” button on “SEEK/TRACK”. Select “(add new)”. To change the preset station to a different one, select and hold the preset station.
Page 266: Playing An Audio Cd And Mp3/Wma/Aac Discs (Multimedia System)
5-6. Playing an audio CD and MP3/WMA/AAC discs (Multimedia system) CD player operation Insert disc or select “CD” on the audio source selection screen with a disc inserted to begin listening to a CD. Audio control screen Pressing the “AUDIO” button displays the audio control screen from any screens of the selected source.
Page 267: Multimedia System
Error messages ■ If an error message is displayed, refer to the following table and take the appropriate measures. If the problem is not rectified, take the vehicle to your Toyota dealer. Message Cause Correction procedures • The disc is dirty or •...
Page 268: Multimedia System
5-6. Playing an audio CD and MP3/WMA/AAC discs (Multimedia system) MP3, WMA and AAC files ■ MP3 (MPEG Audio LAYER3) is a standard audio compression format. Files can be compressed to approximately 1/10 of their original size by using MP3 compression. WMA (Windows Media Audio) is a Microsoft audio compression format.
Page 269: Multimedia System
5-6. Playing an audio CD and MP3/WMA/AAC discs (Multimedia system) ● AAC file compatibility • Compatible standards MPEG4/AAC-LC • Compatible sampling frequencies 11.025/12/16/22.05/24/32/44.1/48 (kHz) • Compatible bit rates 16-320 (kbps) Compatible channel modes: 1ch and 2ch ● Compatible media Media that can be used for MP3, WMA and AAC playback are CD-Rs and CD-RWs.
Page 270: Multimedia System
5-6. Playing an audio CD and MP3/WMA/AAC discs (Multimedia system) ● ID3, WMA and AAC tags ID3 tags can be added to MP3 files, making it possible to record the track title, artist name, etc. The system is compatible with ID3 Ver. 1.0, 1.1, and Ver. 2.2, 2.3 ID3 tags. (The number of characters is based on ID3 Ver.
Page 271 5-6. Playing an audio CD and MP3/WMA/AAC discs (Multimedia system) NOTICE Discs and adapters that cannot be used ■ Do not use the following types of CDs. Also, do not use 3 in. (8 cm) CD adapters, Dual Discs or printable discs. Doing so may damage the CD player and/or the CD insert/eject function.
Page 272: Using An External Device (Multimedia System)
5-7. Using an external device (Multimedia system) Listening to an iPod Connecting an iPod enables you to enjoy music from the vehicle speakers. Select “iPod” on the audio source selection screen. When the iPod connected to the system includes iPod video, the system can only output the sound by selecting the browse screen.
Page 273 5-7. Using an external device (Multimedia system) Selecting a play mode Select “Browse” on the screen. Select the desired play mode. Then select a song to begin using the selected play mode. Shuffle play Select to change on/off. Repeat play Select to change on/off.
Page 274 5-7. Using an external device (Multimedia system) Cord hook ■ P. 250 About iPod ■ ● “Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod or iPhone, respectively, and has been certified by the developer to meet Apple performance stan- dards.
Page 275 5-7. Using an external device (Multimedia system) iPod functions ■ ● When an iPod is connected and the audio source is changed to iPod mode, the iPod will resume play from the same point in which it was last used. ●...
Page 276 5-7. Using an external device (Multimedia system) Compatible models ■ ® ® ® ® ® The following iPod , iPod nano , iPod classic , iPod touch and iPhone devices can be used with this system. ● Made for • iPod touch (5th generation) •...
Page 277: Listening To A Usb Memory Device
5-7. Using an external device (Multimedia system) Listening to a USB memory device Connecting a USB memory device enables you to enjoy music from the vehicle speakers. Touch “USB” on the audio source selection screen. Connecting a USB memory device P.
Page 278 5-7. Using an external device (Multimedia system) Cord hook ■ P. 250 USB memory functions ■ ● Depending on the USB memory device that is connected to the system, the device itself may not be operable and certain functions may not be avail- able.
Page 279 5-7. Using an external device (Multimedia system) ● MP3, WMA and AAC files MP3 (MPEG Audio LAYER 3) is a standard audio compression format. Files can be compressed to approximately 1/10 of their original size using MP3 compression. WMA (Windows Media Audio) is a Microsoft audio compression format. This format compresses audio data to a size smaller than that of the MP3 format.
Page 280 5-7. Using an external device (Multimedia system) ● ID3, WMA and AAC tags ID3 tags can be added to MP3 files, making it possible to record the track title, artist name, etc. The system is compatible with ID3 Ver. 1.0, 1.1, and Ver. 2.2, 2.3 ID3 tags. (The number of characters is based on ID3 Ver.
Page 281 5-7. Using an external device (Multimedia system) NOTICE Cord hook (P. 251) ■ To prevent damage to the USB memory device or its terminals ■ ● Do not leave the USB memory device in the vehicle. The temperature inside the vehicle may become high, resulting in damage to the USB memory device.
Page 282: Using The Aux Port
5-7. Using an external device (Multimedia system) Using the AUX port To use the AUX port, connect a portable player, press the “AUDIO” button, then select “AUX” to display the audio control screen. Connecting a portable audio player P. 250 Operating portable audio players connected to the multimedia system ■...
Page 283: Connecting Bluetooth ® (Multimedia System)
® 5-8. Connecting Bluetooth (Multimedia system) Preparations to use wireless communica- tion ® The following can be performed using Bluetooth wireless com- munication: A portable audio player can be operated and listened to via ■ multimedia system Hands-free phone calls can be made via a cellular phone ■...
Page 284 ® 5-8. Connecting Bluetooth (Multimedia system)  Certifications for the Bluetooth ■ FCC ID: BABFT0049A ● CAUTION: Radio Frequency Radiation Exposure This equipment complies with FCC radiation exposure limits set forth for uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines.
Page 285 ® 5-8. Connecting Bluetooth (Multimedia system) Device registration/connection flow ® 1. Register the Bluetooth device to be used with multimedia system (P. 287, 288, 289) ® 2. Connect the Bluetooth device to be used (P. 291) To be used for audio To be used for hands-free phone ®...
Page 286 ® 5-8. Connecting Bluetooth (Multimedia system) Registering and connecting from the “Bluetooth* Setup” screen To display the screen shown below, press the “SETUP” button and select “Bluetooth ” on the “Setup” screen. Select to connect the device to be used with multimedia sys- tem.
Page 287: Registering A Bluetooth
® 5-8. Connecting Bluetooth (Multimedia system) ® Registering a Bluetooth audio player for the first time ® To use the Bluetooth Audio, it is necessary to register an audio player with the system. Once the player has been registered, it is possible to use the ®...
Page 288: Registering A Bluetooth ® Phone For The First Time
® 5-8. Connecting Bluetooth (Multimedia system) ® Registering a Bluetooth phone for the first time To use the hands-free system, it is necessary to register a ® Bluetooth phone with the system. Once the phone has been registered, it is possible to use the hands-free system.
Page 289: Registering A Bluetooth ® Device
® 5-8. Connecting Bluetooth (Multimedia system) ® Registering a Bluetooth device ® Bluetooth compatible phones (HFP) and portable audio players (AVP) can be registered simultaneously. You can register up to 5 ® Bluetooth devices. ® How to register a Bluetooth device Display the “Bluetooth Setup”...
Page 290 ® 5-8. Connecting Bluetooth (Multimedia system) Check that this screen is dis- played when registration is complete. Select “OK” when the connection status changes from “Connect- ing...” to “Connected”. If an error message is displayed, follow the guidance on the screen to try again.
Page 291: Connecting A Bluetooth ® Device
® 5-8. Connecting Bluetooth (Multimedia system) ® Connecting a Bluetooth device ® Up to 5 Bluetooth devices (Phones (HFP) and audio players (AVP)) can be registered. ® If more than 1 Bluetooth device has been registered, select which device to connect to. Press the “SETUP”...
Page 292 ® 5-8. Connecting Bluetooth (Multimedia system) Auto connection To turn auto connection mode on, set “Bluetooth Power” to on. (P. 294) When you register a phone, auto connection will be activated. Always ® set it to this mode and leave the Bluetooth phone in a place where a connection can be established.
Page 293: Displaying A Bluetooth ® Device Details
® 5-8. Connecting Bluetooth (Multimedia system) ® Displaying a Bluetooth device details You can confirm and change the registered device details. ® Bluetooth device registration status Display the “Bluetooth Setup” screen. (P. 286) : Bluetooth is a registered trademark of Bluetooth SIG, Inc. Select the device.
Page 294: Detailed Bluetooth ® System Settings
® 5-8. Connecting Bluetooth (Multimedia system) ® Detailed Bluetooth system settings ® You can confirm and change the detailed Bluetooth settings. ® How to check and change detailed Bluetooth settings Display the “Bluetooth Setup” screen. (P. 286) Select “System Settings”. The following screen is displayed: ®...
Page 295: Bluetooth ® Audio (Multimedia System)
® 5-9. Bluetooth Audio (Multimedia system) ® Listening to Bluetooth Audio ® The Bluetooth audio system enables the user to enjoy music played on a portable player from the vehicle speakers via wire- less communication. ® When a Bluetooth device cannot be connected, check the connec- tion status on the “Bluetooth Audio”...
Page 296: Multimedia System
® 5-9. Bluetooth Audio (Multimedia system) Indicators Conditions Good Not connected Connection status Full Empty Battery charge ® Playing Bluetooth audio Select to Play/Pause. For details on “Bluetooth Audio” screen operation methods, refer to Basic Audio Operations. (P. 252) For details on how to select a track or album, refer to selecting, fast- forwarding and reversing tracks/files/songs.
Page 297: Bluetooth ® Phone (Multimedia System)
® 5-10. Bluetooth phone (Multimedia system) ® Using a Bluetooth Phone The hands-free system is a function that allows you to use your cellular phone without touching it. ® ® This system supports Bluetooth . Bluetooth is a wireless data system that allows the cellular phone to wirelessly connect to the hands-free system and make/receive calls.
Page 298 ® 5-10. Bluetooth phone (Multimedia system) Telephone switch (P. 313) ■ Microphone ■ Vehicles without moon roof Vehicles with moon roof   The vehicle’s built in microphone is used when talking on the phone. The person you are speaking to can be heard from the front speak- ers.
Page 299 ® 5-10. Bluetooth phone (Multimedia system) Indicators Conditions Good Not connected Connection status Full Empty Battery charge “Rm”: Roaming area Call area Excellent Poor Signal strength I n f o r ma t i o n P r o v i d e d b y :...
Page 300: Making A Call
® 5-10. Bluetooth phone (Multimedia system) Making a call ® Once a Bluetooth phone is registered, you can make a call using the following procedure: Dialing Display the phone screen. (P. 297) Select the “Dial Pad” tab and enter a phone number. To delete the input phone number, select For the first digit, you can enter “+”...
Page 301 ® 5-10. Bluetooth phone (Multimedia system) Press the switch on the steering wheel. If the phonebook is empty, a message will be displayed. ® For a PBAP compatible Bluetooth phone and “Automatic Contact/  History Transfer” is off Select the desired item. Select to transfer new con- tacts from a cellular phone, select “Always”...
Page 302 ® 5-10. Bluetooth phone (Multimedia system) Calling using favorites list You can make a call using numbers registered in the contact. Display the phone screen. (P. 297) Select “Favorites” tab. Select the desired number to make a call. Dialing from call history You can make a call using the call history, which has the 3 functions below.
Page 303: Receiving A Call
® 5-10. Bluetooth phone (Multimedia system) Receiving a call When a call is received, the following screen is displayed together with a sound. To answer the phone Press the switch on the steer- ing wheel or select To refuse a call Press the switch on the steering wheel or select To adjust the incoming call volume...
Page 304: Speaking On The Phone
® 5-10. Bluetooth phone (Multimedia system) Speaking on the phone The following screen is displayed when speaking on the phone. To adjust the call volume Select “-” or “+”. You can also adjust the volume using the steering switches or the volume knob. To prevent the other party from hearing your voice Select “Mute”.
Page 305 ® 5-10. Bluetooth phone (Multimedia system) Release Tones ■ ● A continuous tone signal is a character string that consists of numbers and the characters p or w. (e.g.056133w0123p#1) ● When the “p” pause tone is used, the tone data up until the next pause tone will be automatically sent after 2 seconds have elapsed.
Page 306 ® 5-10. Bluetooth phone (Multimedia system) To transfer a call Select “Handset Mode” to on from a hands-free call to a cellular phone call. Select “Handset Mode” to off from a cellular phone call to a hands-free call. Transmit volume setting Select “Transmit Volume”.
Page 307 ® 5-10. Bluetooth phone (Multimedia system) Transferring calls ■ ● If you transfer from the cellular phone to hands-free, the hands-free screen will be displayed, and you can operate the system using the screen. ● Transfer method and operation may vary according to the cellular phone used.
Page 308: Bluetooth ® Phone Message Function
® 5-10. Bluetooth phone (Multimedia system) ® Bluetooth phone message function Received messages can be forwarded from the connected ® Bluetooth phone, enabling checking and replying using the multimedia system. ® Depending on the type of Bluetooth phone connected, received messages may not be transferred to the message inbox.
Page 309 ® 5-10. Bluetooth phone (Multimedia system) Receiving a message ■ ● Depending on the cellular phone used for receiving messages, or its regis- tration status with the navigation system, some information may not be dis- played. ● The pop up screen is separately available for incoming e-mail and SMS/ MMS messages under the following conditions: E-mail: •...
Page 310 ® 5-10. Bluetooth phone (Multimedia system) Checking the messages Display the message inbox screen. (P. 308) Select the desired message from the list. Check that the message is displayed. E-mails: Select “Mark Unread” or “Mark Read” to mark mail unread or read on the message inbox screen.
Page 311 ® 5-10. Bluetooth phone (Multimedia system) Check the messages ■ ® ● Depending on the type of Bluetooth phone being connected, it may be nec- essary to perform additional steps on the phone. ● ® Messages are displayed in the appropriate connected Bluetooth phone’s registered mail address folder.
Page 312 ® 5-10. Bluetooth phone (Multimedia system) Calling the message sender Calls can be made to an e-mail/SMS/MMS message sender's phone number. Display the message inbox screen. (P. 308) Select the desired message. Select Check that the “Call” screen is displayed. Calling from a number within a message ■...
Page 313: Using The Steering Wheel Switches
® 5-10. Bluetooth phone (Multimedia system) Using the steering wheel switches The steering wheel switches can be used to operate a connected cellular phone. Operating a telephone using the steering wheel switches Volume switch • Increase/Decrease the vol- • Press and hold: Continuously increase/ decrease the volume...
Page 314: Bluetooth ® Phone Settings
® 5-10. Bluetooth phone (Multimedia system) ® Bluetooth phone settings You can adjust the hands-free system to your desired settings. “Phone/Message Settings” screen To display the screen shown below, press the “SETUP” button, and select “Phone” on the “Setup” screen. Set the phone connection (P.
Page 315 ® 5-10. Bluetooth phone (Multimedia system) Sound setting Display the “Phone/Message Settings” screen. (P. 314) Select “Sound Settings” on the “Phone/Message Settings” screen. Set the desired ringtone. Adjust the ringtone volume. Adjust the message readout volume. Set the desired incoming SMS/MMS tone.
Page 316: Call History Settings
® 5-10. Bluetooth phone (Multimedia system) Contact/Call History Settings ® The contact can be transferred from a Bluetooth phone to the sys- tem. The contact also can be added, edited and deleted. The call history can be deleted and contact and favorites can be changed.
Page 317 ® 5-10. Bluetooth phone (Multimedia system) Update contacts from phone Operation methods differ between PBAP compatible and PBAP ® incompatible but OPP compatible Bluetooth phones. If your cellular phone is neither PBAP nor OPP compatible, the con- tacts cannot be transferred. ®...
Page 318 ® 5-10. Bluetooth phone (Multimedia system) ® For PBAP Incompatible but OPP compatible Bluetooth ■ Phones Select “Update Contacts from Phone”. ® Transfer the contact data to the system using a Bluetooth phone. This operation may be unnecessary depending on the type of cellular phone.
Page 319 ® 5-10. Bluetooth phone (Multimedia system) Registering a new contact to the contact list New contact data can be registered. Up to 4 numbers per person can ® be registered. For PBAP compatible Bluetooth phones, this function is available when “Automatic Contact/History Transfer” is set to off. (P.
Page 320 ® 5-10. Bluetooth phone (Multimedia system) Editing the contact data ® For PBAP compatible Bluetooth phones, this function is available when “Automatic Contact/History Transfer” is set to off. (P. 316) Select “Edit Contact”. Select the desired contact. Select corresponding to the desired name or number. ...
Page 321 ® 5-10. Bluetooth phone (Multimedia system) Deleting the contact data ® For PBAP compatible Bluetooth phones, this function is available when “Automatic Contact/History Transfer” is set to off. (P. 316) Select “Delete Contacts”. Select the desired contact and select “Delete”. Select “Yes”...
Page 322: Contact
® 5-10. Bluetooth phone (Multimedia system) When 15 contacts have already been registered to the favorites list  When 15 contacts have already been registered to the favorites list, a registered contact needs to be replaced. Select “Yes” when the confirmation screen appears to replace a contact.
Page 323 ® 5-10. Bluetooth phone (Multimedia system) Deleting the contacts in the favorites list ■ Select “Remove Favorite”. Select the desired contacts and select “Remove”. Select “Yes” when the confirmation screen appears. Check that a confirmation screen is displayed when the opera- tion is complete.
Page 324 ® 5-10. Bluetooth phone (Multimedia system) Message Settings Display the “Phone/Message Settings” screen. (P. 314) Select “Messaging Settings”. Select the desired item to be set. automatic message transfer on/off. automatic message readout on/off. Set the SMS/MMS notifica- tion popup on/off. Set the e-mail notification popup on/off.
Page 325 ® 5-10. Bluetooth phone (Multimedia system) Displaying the “Messaging Settings” screen in a different way ■ Display the phone screen. (P. 297) Select Select “Settings”. Phone Display Settings Display the “Phone/Message Settings” screen. (P. 314) Select “Phone Display Settings”. Select the desired item to be set. Change the incoming call display.
Page 326: What To Do If
 For a list of specific devices which operation has been confirmed on this system, check with your Toyota dealer or the following web- site: http://www.toyota.com/entune.html The Bluetooth version of the connected cellular phone may be older than the specified version.
Page 327: Multimedia System
® 5-10. Bluetooth phone (Multimedia system) When registering/connecting a cellular phone  A cellular phone cannot be registered. An incorrect passcode was entered on the cellular phone.  Enter the correct passcode on the cellular phone. The registration operation has not been completed on the cellular phone side.
Page 328: Multimedia System
 For a list of specific devices which operation has been confirmed on this system, check with your Toyota dealer or the following web- site: http://www.toyota.com/entune.html Automatic phonebook transfer function on this system is set to off.
Page 329: Multimedia System
® 5-10. Bluetooth phone (Multimedia system) In other situations  Even though all conceivable measures have been taken, the symptom sta- tus does not change. The cellular phone is not close enough to this system.  Bring the cellular phone closer to this system. The cellular phone is the most likely cause of the symptom.
Page 330: Bluetooth (Multimedia System)
® 5-11. Bluetooth (Multimedia system) ® Bluetooth ® When using the Bluetooth audio system ■ ● In the following conditions, the system may not function. • If the portable audio player is turned off • If the portable audio player is not connected •...
Page 331: System
® 5-11. Bluetooth (Multimedia system) ® Bluetooth antenna ■ The antenna is built into the display. If the portable audio player is behind the seat or in the glove box or console box, or is touching or covered by metal objects, the connection status may deteriorate.
Page 332: System
® 5-11. Bluetooth (Multimedia system) Compatible models ■ ® The Bluetooth audio system supports portable audio players with the follow- ing specifications ● ® Bluetooth specifications: Ver. 2.0, or higher (Recommended: Ver. 3.0+EDR or higher) ● Profiles: • A2DP (Advanced Audio Distribution Profile) Ver. 1.0, or higher (Recommended: Ver.
Page 333: System
® 5-11. Bluetooth (Multimedia system) Certification ■ NOTE: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interfer- ence, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 334: System
® 5-11. Bluetooth (Multimedia system) WARNING While driving ■ Do not use the portable audio player, cellular phone or connect a device to ® the Bluetooth system. Caution regarding interference with electronic devices ■ ® ● Your audio unit is fitted with Bluetooth antennas.
Page 335: Using The Voice Command System (Multimedia System)
5-12. Using the voice command system (Multimedia system) Voice command system The voice command system enables the hands-free system to be operated using voice commands. Operations of the voice command system can be performed by selecting the menu corresponding to each function on the screen.
Page 336 5-12. Using the voice command system (Multimedia system) Casual speech recognization Due to natural language speech recognition technology, this system enables recognition of a command when spoken naturally. However, the system cannot recognize every variation of each command. In some situations, it is possible to omit the command for the proce- dure and directly state the desired operation.
Page 337: Command List
5-12. Using the voice command system (Multimedia system) Command list Some recognizable voice commands and their actions are shown below as examples. Basic  Command Action Prompts voice guidance to offer examples of com- “Help” mands or operation methods “Go Back” Returns to the previous screen ...
Page 338 5-12. Using the voice command system (Multimedia system) I n f o r ma t i o n P r o v i d e d b y :...
Page 339: Interior Features
Interior features 6-1. Using the air conditioning system and defogger Automatic air conditioning system ......340 Seat heaters...... 348 6-2. Using the interior lights Interior lights list ....349 • Interior lights ....350 • Personal lights ....350 6-3. Using the storage features List of storage features ..
Page 340: Automatic Air Conditioning System
6-1. Using the air conditioning system and defogger Automatic air conditioning system Air outlets and fan speed are automatically adjusted according to the temperature setting. Air conditioning controls Adjusting the temperature setting ■ To adjust the temperature setting, turn clockwise to increase the temperature and turn counterclockwise to decrease the temperature.
Page 341 6-1. Using the air conditioning system and defogger Fan speed setting ■ To adjust the fan speed, press “” on to increase the fan speed and “” to decrease the fan speed. Press to turn the fan off. Changing airflow modes ■...
Page 342: Other Functions
6-1. Using the air conditioning system and defogger Other functions Switching between outside air and recirculated air modes ■ Press The mode switches between outside air mode (the indicator is off) and recirculated air mode (the indicator is on) each time the button is pressed.
Page 343 6-1. Using the air conditioning system and defogger Air outlets Location of air outlets ■ The air outlets and air volume change according selected airflow mode. : Some models Adjusting the position of and opening and closing the air out- ■...
Page 344 6-1. Using the air conditioning system and defogger Open the vent. Close the vent. Right and left side outlets (type B)  Direct air flow to the left or right, up or down. Open the vent. Close the vent. Steering wheel switches Temperature control Press “”...
Page 345 6-1. Using the air conditioning system and defogger Operation of the air conditioning system in Eco drive mode ■ In Eco drive mode, the air conditioning system is controlled as follows to pri- oritize fuel efficiency: ● Heating/cooling capacity is restricted. ●...
Page 346 6-1. Using the air conditioning system and defogger Outside/recirculated air mode ■ ● When driving on dusty roads such as tunnels or in heavy traffic, set the out- side/recirculated air mode button to the recirculated air mode. This is effec- tive in preventing outside air from entering the vehicle interior.
Page 347 6-1. Using the air conditioning system and defogger Air conditioning filter ■ P. 411 Customization ■ The air conditioning control of Eco drive mode can be changed to the same setting as that used in normal drive mode. (Customizable features P. 515) WARNING To prevent the windshield from fogging up ■...
Page 348: Seat Heaters
6-1. Using the air conditioning system and defogger  Seat heaters WARNING ● Care should be taken to prevent injury if anyone in the following categories comes in contact with the seats when the heater is on: • Babies, small children, the elderly, the sick and the physically chal- lenged •...
Page 349: Using The Interior Lights
6-2. Using the interior lights Interior lights list Interior lights/personal lights (P. 350) Luggage compartment light (if equipped) (P. 134) I n f o r ma t i o n P r o v i d e d b y :...
Page 350: Interior Lights
6-2. Using the interior lights Interior lights Turns the lights off Turns the lights on/off linked to door positions Turns the lights on Personal lights Turns the lights on Turns the lights off I n f o r ma t i o n P r o v i d e d b y :...
Page 351 If the interior lights, personal lights or luggage compartment light remain on when the “POWER” switch is off, the lights will go off automatically after 20 minutes. Customization that can be configured at Toyota dealer ■ Settings (e.g. the time elapsed before lights turn off) can be changed.
Page 352: 6-3. Using The Storage Features
6-3. Using the storage features List of storage features Bottle holders (P. 356) Cup holders (P. 355) Auxiliary boxes (if equipped) Console box (if equipped) (P. 354) (P. 353) Glove box (P. 353) WARNING ● Do not leave glasses, lighters or spray cans in the storage spaces, as this may cause the following when cabin temperature becomes high: •...
Page 353: Glove Box
6-3. Using the storage features Glove box Pull up the lever to open the glove box. Console box (if equipped) Lift the lid while pulling up the knob to release the lock. Remove the lid at the bottom of the console box. Small items can be stored in this space.
Page 354: Auxiliary Boxes
6-3. Using the storage features Auxiliary boxes Type A Type B    Type C  Type D  Type E (if equipped) WARNING Do not place items that easily roll over or extend past the box’s rim. The items may be thrown out of the tray, causing an accident.
Page 355: Cup Holders
6-3. Using the storage features Cup holders Front ■ Rear ■ Type A Type B   Pull down the cup holder lid. WARNING Do not place anything other than cups or beverage cans in the cup holders. Items in the cup holders may be thrown out of the holders in the event of an accident or sudden braking, causing injury.
Page 356: Bottle Holders
6-3. Using the storage features Bottle holders When using the bottle holder ■ ● When storing a bottle, close the cap. ● The bottle may not be stored depending on its size or shape. WARNING Do not place anything other than a bottle in the bottle holders. Items in the bottle holders may be thrown out of the holders in the event of an accident or sudden braking and cause injury.
Page 357: Other Interior Features
6-4. Other interior features Other interior features Sun visors To set the visor in the forward position, flip it down. To set the visor in the side posi- tion, flip down, unhook, and swing it to the side. Vanity mirrors Slide the cover to open.
Page 358 When “” or “E” is displayed ■ The system may be malfunctioning. Take your vehicle to your Toyota dealer. I n f o r ma t i o n P r o v i d e d b y :...
Page 359: Power Outlet
6-4. Other interior features Power outlet Please use as a power supply for electronic goods that use less than 12 VDC/10 A (power consumption of 120 W). Open the lid. The power outlet can be used when ■  Vehicles without a smart key system The engine switch is in the “ACC”...
Page 360: Coat Hooks
6-4. Other interior features Coat hooks (if equipped) WARNING Do not hang coat hangers or other hard or sharp objects on the hook. If the SRS curtain shield airbags deploy, these items may become projectiles, causing death or serious injury. I n f o r ma t i o n P r o v i d e d b y :...
Page 361: Assist Grips
6-4. Other interior features Assist grips An assist grip installed on the ceil- ing can be used to support your body while sitting on the seat. WARNING Do not use the assist grip when getting in or out of the vehicle or rising from your seat.
Page 362: Luggage Cover
6-4. Other interior features Luggage cover (if equipped) Removing the luggage cover ■ Unhook the cords. Pull the luggage cover back- ward disengage anchors. Remove the luggage cover. I n f o r ma t i o n P r o v i d e d b y :...
Page 363 6-4. Other interior features Installing the luggage cover ■ Place the luggage cover on the anchors. Push the luggage cover until a click sound is heard. Hook the cords. I n f o r ma t i o n P r o v i d e d b y :...
Page 364 6-4. Other interior features I n f o r ma t i o n P r o v i d e d b y :...
Page 365: Maintenance And Care Cleaning And Protecting
Maintenance and care 7-1. Maintenance and care Cleaning and protecting the vehicle exterior..366 Cleaning and protecting the vehicle interior... 369 7-2. Maintenance Maintenance requirements ....372 General maintenance..375 Emission inspection and maintenance (I/M) programs......378 7-3. Do-it-yourself maintenance Do-it-yourself service precautions .....
Page 366: Cleaning And Protecting The Vehicle Exterior
7-1. Maintenance and care Cleaning and protecting the vehicle exterior Perform the following to protect the vehicle and maintain it in prime condition: ● Working from top to bottom, liberally apply water to the vehicle body, wheel wells and underside of the vehicle to remove any dirt and dust.
Page 367 7-1. Maintenance and care Aluminum wheels (if equipped) ■ ● Remove any dirt immediately by using a neutral detergent. Do not use hard brushes or abrasive cleaners. Do not use strong or harsh chemical clean- ers. Use the same mild detergent and wax as used on the paint. ●...
Page 368 7-1. Maintenance and care NOTICE When using a high pressure car wash ■ ● When washing the vehicle, do not spray the camera or its surrounding area directly with a high pressure washer. Shock applied from high pres- sure water may cause the device to not operate normally. ●...
Page 369: Cleaning And Protecting The Vehicle Interior
● Allow the solution to soak in for a few minutes. Remove the dirt and wipe off the solution with a clean, damp cloth. Caring for leather areas ■ Toyota recommends cleaning the interior of the vehicle at least twice a year to maintain the quality of the vehicle's interior. Shampooing the carpets ■...
Page 370 7-1. Maintenance and care WARNING Water in the vehicle ■ ● Do not splash or spill liquid in the vehicle, such as on the floor, in the hybrid battery (traction battery) air vents, and in the luggage compartment. Doing so may cause the hybrid battery, electrical components, etc. to mal- function or catch fire.
Page 371 7-1. Maintenance and care NOTICE Cleaning detergents ■ ● Do not use the following types of detergent, as they may discolor the vehi- cle interior or cause streaks or damage to painted surfaces: • Non-seat portions: Organic substances such as benzene or gasoline, alkaline or acidic solutions, dye, and bleach •...
Page 372: Maintenance Requirements
Toyota recommends the following main- tenance: General maintenance General maintenance should be performed on a daily basis. This can be done by yourself or by a Toyota dealer. Scheduled maintenance Scheduled maintenance should be performed at specified intervals according to the maintenance schedule.
Page 373 Repair and replacement ■ It is recommended that genuine Toyota parts be used for repairs to ensure performance of each system. If non-Toyota parts are used in replacement or if a repair shop other than a Toyota dealer performs repairs, confirm the war- ranty coverage.
Page 374 7-2. Maintenance WARNING If your vehicle is not properly maintained ■ Improper maintenance could result in serious damage to the vehicle and possible serious injury or death. Handling of the 12-volt battery ■ ● Engine exhaust, some of its constituents, and a wide variety of automobile components contain or emit chemicals known to the State of California to cause cancer and birth defects and other reproductive harm.
Page 375: General Maintenance
“Owner's Warranty Information Booklet” or “Owner's Manual Supplement/Sched- uled Maintenance Guide”. It is recommended that any problem you notice should be brought to the attention of your Toyota dealer or qualified service shop for advice. Engine compartment...
Page 376 7-2. Maintenance Items Check points • The vehicle should not pull to one side when the brakes are applied. • The brakes should work effectively. Brakes • The brake pedal should not feel spongy. • The brake pedal should not get too close to the floor when the brakes are applied.
Page 377: Vehicle Exterior
7-2. Maintenance Vehicle exterior Items Check points Doors • Do the doors operate smoothly? • Does the engine hood lock system work prop- Engine hood erly? • There should not be any signs of fluid leakage Fluid leaks after the vehicle has been parked. •...
Page 378: Emission Inspection And Maintenance (I/M) Programs
The OBD system determines that a problem exists somewhere in the emission control system. Your vehicle may not pass the I/M test and may need to be repaired. Contact your Toyota dealer to service the vehicle. Your vehicle may not pass the I/M test in the following situations: ●...
Page 379: Do-It-Yourself Maintenance
(P. 391) • Rag or paper towel • Funnel (used only for adding brake fluid) • “Toyota Super Long Life Coolant” or a similar high quality ethylene glycol based non-sili- cate, non-amine, non-nitrite and non-borate coolant with long-life hybrid organic acid tech-...
Page 380 7-3. Do-it-yourself maintenance Items Check points • Water or washer fluid containing antifreeze (for winter use) Washer fluid (P. 393) • Funnel (used only for adding water or washer fluid) WARNING The engine compartment contains many mechanisms and fluids that may move suddenly, become hot, or become electrically energized.
Page 381 7-3. Do-it-yourself maintenance WARNING Safety glasses ■ Wear safety glasses to prevent flying or falling material, fluid spray, etc. from getting in your eyes. NOTICE If you remove the air cleaner filter ■ Driving with the air cleaner filter removed may cause excessive engine wear due to dirt in the air.
Page 382: Hood
7-3. Do-it-yourself maintenance Hood Release the lock from the inside of the vehicle to open the hood. Pull the hood lock release lever. The hood will pop up slightly. Pull up the auxiliary catch lever and lift the hood. Hold the hood open by inserting the supporting rod into the slot.
Page 383 7-3. Do-it-yourself maintenance WARNING Pre-driving check ■ Check that the hood is fully closed and locked. If the hood is not locked properly, it may open while the vehicle is in motion and cause an accident, which may result in death or serious injury. After installing the support rod into the slot ■...
Page 384: Positioning A Floor Jack
7-3. Do-it-yourself maintenance Positioning a floor jack When using a floor jack, follow the instructions in the manual provided with the jack and perform the operation safely. When raising your vehicle with a floor jack, position the jack cor- rectly. Improper placement may damage your vehicle or cause injury.
Page 385: Engine Compartment
7-3. Do-it-yourself maintenance Engine compartment Fuse boxes (P. 416) Engine/power control unit coolant radiator (P. 389) Engine oil filler cap (P. 387) Electric cooling fan Engine coolant radiator cap Condenser (P. 391) Power control unit Engine oil level dipstick coolant reservoir (P.
Page 386 7-3. Do-it-yourself maintenance Engine oil With the engine at operating temperature and turned off, check the oil level on the dipstick. Checking the engine oil ■ Park the vehicle on level ground. After warming up the engine and turning off the hybrid system, wait more than 5 minutes for the oil to drain back into the bottom of the engine.
Page 387 7-3. Do-it-yourself maintenance Adding engine oil ■ If the oil level is below or near the low level mark, add engine oil of the same type as that already in the engine. Make sure to check the oil type and prepare the items needed before adding oil.
Page 388 Dispose of used oil and filters only in a safe and acceptable manner. Do not dispose of used oil and filters in household trash, in sewers or onto the ground. Call your Toyota dealer, service station or auto parts store for information concerning recycling or disposal.
Page 389 7-3. Do-it-yourself maintenance Coolant Engine coolant reservoir  The coolant level is satisfactory if it is between the “FULL” and “LOW” lines on the reservoir when the engine is cold. Reservoir cap “FULL” line “LOW” line If the level is on or below the “LOW”...
Page 390 ■ Visually check the radiators, hoses, engine/power control unit coolant reser- voir caps, drain cock and water pump. If you cannot find a leak, have your Toyota dealer test the cap and check for leaks in the cooling systems. WARNING When the hybrid system is hot ■...
Page 391 Check the radiator and condenser and clear away any foreign objects. If either of the above parts is extremely dirty or you are not sure of their condition, have your vehicle inspected by your Toyota dealer. WARNING When the hybrid system is hot ■...
Page 392 7-3. Do-it-yourself maintenance Disconnect the claws and remove the service cover. Remove the reservoir cap. Add brake fluid slowly while checking the fluid level. Brake fluid can absorb moisture from the air ■ Excess moisture in the brake fluid can cause a dangerous loss of braking effi- ciency.
Page 393: Washer Fluid
7-3. Do-it-yourself maintenance Washer fluid If the amount of washer fluid is insufficient, add washer fluid. WARNING When adding washer fluid ■ Add washer fluid after the hybrid system has been stopped and cooled down sufficiently. Washer fluid contains alcohol and may catch fire if spilled inside a hot engine compartment.
Page 394: 12-Volt Battery
7-3. Do-it-yourself maintenance 12-volt battery Location ■ The 12-volt battery is located under the rear right seat. Removing the 12-volt battery cover ■ Remove the 2 clips Push in the center part of the clips Remove the clips Disengage the 3 clips and 3 guides on the back of the cover and remove the 12-volt battery cover.
Page 395 7-3. Do-it-yourself maintenance Exterior ■ Make sure that the 12-volt battery terminals are not corroded and that there are no loose connections, cracks, or loose clamps. Terminals Hold-down clamp Installing the 12-volt battery cover ■ Install the 12-volt battery cover. Guides Clips Check if the clips and guides...
Page 396 12-volt battery. Take extra care when connecting the 12-volt battery if the “POWER” switch mode prior to dis- charge is unknown. If the system will not start even after multiple attempts, contact your Toyota dealer. WARNING Chemicals in the 12-volt battery ■...
Page 397 Use a 12-volt battery designed for this vehicle. Failure to do so may cause gas (hydrogen) to enter the passenger compartment, causing a fire or explosion. For replacement of the 12-volt battery, contact your Toyota dealer. NOTICE When recharging the 12-volt battery ■...
Page 398: Tires
Tire rotation Rotate the tires in the order shown. To equalize tire wear and extend tire life, Toyota recommends that tire rotation is carried out at the same interval as tire inspection. Front Do not fail to initialize the tire pressure warning system after tire rotation.
Page 399 ID codes must be registered in the tire pressure warning computer and the tire pressure warning system must be initialized. Have tire pressure warning valve and transmitter ID codes registered by your Toyota dealer. (P. 400) ◆ Initializing the tire pressure warning system The tire pressure warning system must be initialized in the fol- ■...
Page 400 ● A tire goes flat repeatedly or cannot be properly repaired due to the size or location of a cut or other damage If you are not sure, consult with your Toyota dealer. Replacing tires and wheels ■ If the ID code of the tire pressure warning valve and transmitter is not reg- istered, the tire pressure warning system will not work properly.
Page 401 7-3. Do-it-yourself maintenance Maximum load of tire ■ Check that the maximum load of the replacement tire is greater than 1/2 of the Gross Axle Weight Ratings (GAWR) of either the front axle or the rear axle, whichever is greater. For the GAWR, see the Certification Label.
Page 402 If there is a lot of snow or ice on the vehicle, particularly around the wheels or wheel housings ● If non-genuine Toyota wheels are used (Even if you use Toyota wheels, the tire pressure warning system may not work properly with some types of tires.) ●...
Page 403 7-3. Do-it-yourself maintenance Tire pressure warning system certification ■  U.S.A. FCC ID: PAXPMVC010 NOTE: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 404 Do not mix tires of different makes, models or tread patterns. Also, do not mix tires of remarkably different treadwear. ● Do not use tire sizes other than those recommended by Toyota. ● Do not mix differently constructed tires (radial, bias-belted or bias-ply tires).
Page 405 When a tire is repaired with liquid sealants, the tire pressure warning valve and transmitter may not operate properly. If a liquid sealant is used, contact your Toyota dealer or other qualified service shop as soon as possible. Make sure to replace the tire pressure warning valve and transmitter when replacing the tire.
Page 406: Tire Inflation Pressure
7-3. Do-it-yourself maintenance Tire inflation pressure Tire inflation pressure The recommended cold tire infla- tion pressure and tire size are dis- played on the tire and loading information label. (P. 497) Inspection and adjustment procedure Tire valve Tire pressure gauge Remove the tire valve cap.
Page 407 Reduced tire life due to wear ● Reduced safety ● Damage to the drive train If a tire needs frequent inflating, have it checked by your Toyota dealer. Instructions for checking tire inflation pressure ■ When checking tire inflation pressure, observe the following: ●...
Page 408 7-3. Do-it-yourself maintenance WARNING Proper inflation is critical to save tire performance ■ Keep your tires properly inflated. If the tires are not properly inflated, the following conditions may occur which could lead to an accident resulting in death or serious injury: ●...
Page 409: Wheels
● Used wheels ● Bent wheels that have been straightened Aluminum wheel precautions (if equipped) ● Use only Toyota wheel nuts and wrenches designed for use with your aluminum wheels. ● When rotating, repairing or changing your tires, check that the wheel nuts are still tight after driving 1000 miles (1600 km).
Page 410 Because tire repair or replacement may affect the tire pressure warn- ing valves and transmitters, make sure to have tires serviced by your Toyota dealer or other qualified service shop. In addition, make sure to purchase your tire pressure warning valves and transmitters at your Toyota dealer.
Page 411: Air Conditioning Filter
7-3. Do-it-yourself maintenance Air conditioning filter The air conditioning filter must be changed regularly to maintain air conditioning efficiency. Replacement method Vehicles without a smart key system: Turn the engine switch to the “LOCK” position. Vehicles with a smart key system: Turn the “POWER” switch off. Open the glove box.
Page 412 7-3. Do-it-yourself maintenance Remove the filter cover. Remove the air conditioning fil- ter and replace it with a new one. The “UP” mark shown on the filter should be pointing up. Checking interval ■ Inspect and replace the air conditioning filter according to the maintenance schedule.
Page 413: Wireless Remote Control/Electronic Key Battery
7-3. Do-it-yourself maintenance Wireless remote control/electronic key battery Replace the battery with a new one if it is depleted. You will need the following items: ● Flathead screwdriver ● Small flathead screwdriver ● Lithium battery CR2016 (vehicles without a smart key system), or CR2032 (vehicles with a smart key system) Replacing the battery (vehicles without a smart key system) Remove the cover.
Page 414 7-3. Do-it-yourself maintenance Replacing the battery (vehicles with a smart key system) Take out the mechanical key. Remove the cover. To prevent damage to the key, cover the tip of the screwdriver with a rag. Remove the depleted battery using a small flathead screw- driver.
Page 415 Use a CR2016 (vehicles without a smart key system) or CR2032 (vehicles ■ with a smart key system) lithium battery ● Batteries can be purchased at your Toyota dealer, local electrical appliance shops or camera stores. ● Replace only with the same or equivalent type recommended by the manu- facturer.
Page 416: Checking And Replacing Fuses
7-3. Do-it-yourself maintenance Checking and replacing fuses If any of the electrical components do not operate, a fuse may have blown. If this happens, check and replace the fuses as nec- essary. Vehicles without a smart key system: Turn the engine switch off. Vehicles with a smart key system: Turn the “POWER”...
Page 417 7-3. Do-it-yourself maintenance Remove the fuse with the pull- out tool. Only type A fuse can be removed using the pullout tool. I n f o r ma t i o n P r o v i d e d b y :...
Page 418 Replace the blown fuse with a new fuse of an appropriate amperage rat- ing. The amperage rating can be found on the fuse box lid. Type E: Contact your Toyota dealer. I n f o r ma t i o n P r o v i d e d b y :...
Page 419 If the lights do not turn on even after the fuse has been replaced, a bulb may need replacement. (P. 420) ● If the replaced fuse blows again, have the vehicle inspected by your Toyota dealer. If there is an overload in a circuit ■...
Page 420: Light Bulbs
As there is a danger that components may be damaged, we recommend that replacement is carried out by your Toyota dealer. Preparing for light bulb replacement Check the wattage of the light bulb to be replaced. (P. 498)
Page 421 7-3. Do-it-yourself maintenance Bulb locations Front ■ Front side marker light Front turn signal/parking light Rear ■ Rear turn signal light License plate lights Back-up light I n f o r ma t i o n P r o v i d e d b y :...
Page 422 7-3. Do-it-yourself maintenance Replacing light bulbs Front side marker lights ■ Turn the steering wheel in the opposite direction of the light to be replaced. Turn the steering wheel to a point that allows your hand to easily fit between the tire and fender liner.
Page 423 7-3. Do-it-yourself maintenance Remove the light bulb. When installing the light bulb and bulb base, reverse the steps listed. Installing the clips. I n f o r ma t i o n P r o v i d e d b y :...
Page 424 7-3. Do-it-yourself maintenance Front turn signal/parking lights ■ Turn the steering wheel in the opposite direction of the light to be replaced. Turn the steering wheel to a point that allows your hand to easily fit between the tire and fender liner.
Page 425 7-3. Do-it-yourself maintenance Rear turn signal lights and back-up lights ■ Open the back door and remove the bolts. Pull the lamp assembly straight back to disengage the clip and 2 pins. Guide (where clip attaches) Turn the bulb base counter- clockwise.
Page 426 7-3. Do-it-yourself maintenance When installing the light bulb, install by conducting with the directions reversed. Install the lamp assembly and then install the 2 bolts. When installing the lamp assem- bly, align the guide (where the clip attaches) and pins the lamp assembly with the con- necting parts on the vehicle body.
Page 427 The headlight low/high beam/daytime running lights, front fog lights (if equipped), stop/tail lights and high mounted stoplight consist of a number of LEDs. If any of the LEDs burn out, take your vehicle to your Toyota dealer to have the light replaced.
Page 428 7-3. Do-it-yourself maintenance WARNING Replacing light bulbs ■ ● Turn off the lights. Do not attempt to replace the bulb immediately after turning off the lights. The bulbs become very hot and may cause burns. ● Do not touch the glass portion of the light bulb with bare hands. When it is unavoidable to hold the glass portion, use and hold with a clean dry cloth to avoid getting moisture and oils on the bulb.
Page 429: When Trouble Arises
When trouble arises 8-1. Essential information Emergency flashers ..430 If your vehicle has to be stopped in an emergency ....431 8-2. Steps to take in an emergency If your vehicle needs to be towed ......433 If you think something is wrong ......
Page 430: Emergency Flashers
8-1. Essential information Emergency flashers The emergency flashers are used to warn other drivers when the vehicle has to be stopped in the road due to a breakdown, etc. Press the switch. All the turn signal lights will flash. To turn them off, press the switch once again.
Page 431: If Your Vehicle Has To Be Stopped In An Emergency
8-1. Essential information If your vehicle has to be stopped in an emergency Only in an emergency, such as if it becomes impossible to stop the vehicle in the normal way, stop the vehicle using the follow- ing procedure: Steadily step on the brake pedal with both feet and firmly depress it. Do not pump the brake pedal repeatedly as this will increase the effort required to slow the vehicle.
Page 432 8-1. Essential information WARNING If the hybrid system has to be turned off while driving ■ ● Power assist for the steering wheel will be lost, making the steering wheel heavier to turn. Decelerate as much as possible before turning off the hybrid system.
Page 433: Steps To Take In An Emergency
If your vehicle needs to be towed If towing is necessary, we recommend having your vehicle towed by your Toyota dealer or a commercial towing service, using a lift-type truck or flatbed truck. Use a safety chain system for all towing, and abide by all state/ provincial and local laws.
Page 434 8-2. Steps to take in an emergency Towing with a sling-type truck Do not tow with a sling-type truck to prevent body damage. Towing with a wheel-lift type truck  From the front  From the rear Release the parking brake. Use a towing dolly under the front wheels.
Page 435 8-2. Steps to take in an emergency Using a flatbed truck If your Toyota is transported by a flatbed truck, it should be tied down at the locations shown in the illustration. If you use chains or cables to tie down your vehicle, the angles shaded in black must be 45.
Page 436 8-2. Steps to take in an emergency Emergency towing procedure Take out the towing eyelet. (P. 462) Open the eyelet cover A using a flathead screwdriver. To protect the bodywork, place a rag between the screwdriver and the vehicle body as shown in the illustration.
Page 437 8-2. Steps to take in an emergency Vehicles without a smart key system: Enter the vehicle being towed and start the hybrid system. If the hybrid system does not start, turn the engine switch to the “ON” posi- tion. Vehicles with a smart key system: Enter the vehicle being towed and start the hybrid system.
Page 438 8-2. Steps to take in an emergency WARNING Observe the following precautions. Failure to do so may result in death or serious injury. When towing the vehicle ■ Be sure to transport the vehicle with the front wheels raised or with all four wheels raised off the ground.
Page 439 8-2. Steps to take in an emergency NOTICE To prevent damage to the vehicle when towing using a wheel-lift type ■ truck When raising the vehicle, ensure adequate ground clearance for towing at the opposite end of the raised vehicle. Without adequate clearance, the vehicle could be damaged while being towed.
Page 440: If You Think Something Is Wrong
8-2. Steps to take in an emergency If you think something is wrong If you notice any of the following symptoms, your vehicle proba- bly needs adjustment or repair. Contact your Toyota dealer as soon as possible. Visible symptoms ● Fluid leaks under the vehicle (Water dripping from the air conditioning after use is normal.)
Page 441: If A Warning Light Turns On Or A Warning Buzzer Sounds
If the light turns off after the parking brake is fully released the system is operating normally.  Immediately stop the vehicle in a safe place and con- tact your Toyota dealer. Continuing to drive the vehi- (Canada) cle may be dangerous.
Page 442 Indicates a malfunction in: • The hybrid system; (U.S.A.) • The electronic engine control system; or • The electronic throttle control system  Have the vehicle inspected by your Toyota dealer immediately. (Canada) SRS warning light Indicates a malfunction in: •...
Page 443 8-2. Steps to take in an emergency Warning light Warning light/Details/Actions Low fuel level warning light Remaining fuel is low When the remaining fuel is approximately 1.3 gal. (5.0 L, 1.1 Imp. gal.) or less, a buzzer sounds and comes on ...
Page 444 When the light comes on after blinking for 1 minute: Malfunction in the tire pressure warning system (P. 446)  Have the system checked by your Toyota dealer. : Brake system warning buzzer: When there is a possible problem that could affect braking performance, the warning light will come on and a warning buzzer will sound.
Page 445 If it is, tighten it securely. The light will go off after several driving trips. If the light does not go off even after several trips, contact your Toyota dealer as soon as possible. When the tire pressure warning light comes on ■...
Page 446 “ON” position (vehicles without a smart key system) or the “POWER” switch is turned to ON mode (vehicles with a smart key system), have it checked by your Toyota dealer. Customization that can be configured at Toyota dealer ■...
Page 447 8-2. Steps to take in an emergency WARNING Maintenance of the tires ■ Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire inflation pressure label (tire and load information label).
Page 448 8-2. Steps to take in an emergency NOTICE To ensure the tire pressure warning system operates properly ■ Do not install tires with different specifications or makers, as the tire pressure warning system may not operate properly. I n f o r ma t i o n P r o v i d e d b y :...
Page 449: If A Warning Message Is Displayed
If any of the warning message or indicator comes on again after the following actions have been performed, contact your Toyota dealer. I n f o r ma t i o n P r o v i d e d b y :...
Page 450 Toyota dealer. • Indicates a malfunction in the smart key system • Indicates a malfunction in the steering lock sys- A buzzer also sounds.  Have the vehicle inspected by your Toyota dealer. (Flashes) (If equipped) Indicates a malfunction in the LED headlight sys- If there is a malfunction, the LED headlights do not turn on.
Page 451 8-2. Steps to take in an emergency Warning message Details/Actions Indicates a malfunction in the cruise control sys- A buzzer also sounds.  Have the vehicle inspected by your Toyota dealer. (If equipped) Indicates a malfunction in the Brake Override System A buzzer also sounds.
Page 452 8-2. Steps to take in an emergency Warning message Details/Actions Indicates that the back door is not fully closed If the vehicle reaches a speed of 3 mph (5 km/h), flashes and a buzzer sounds to indicate that the back door is not yet fully closed.
Page 453 8-2. Steps to take in an emergency Warning message Details/Actions Indicates that the hybrid system has overheated This message may be displayed when driving under severe operating conditions. (For exam- ple, when driving up a long steep hill.) A buzzer also sounds. ...
Page 454 8-2. Steps to take in an emergency Warning message Details/Actions Indicates that the engine switch is turned to the “ACC” or “LOCK” position (vehicles without a smart key system) or the “POWER” switch is turned to ACCESSORY mode or turned off (vehi- cles with a smart key system) and the driver’s door is opened while the lights are turned on A buzzer also sounds.
Page 455  Have maintenance performed on the hybrid system (traction battery) cooling component at your Toyota dealer. I n f o r ma t i o n P r o v i d e d b y :...
Page 456: With The Electronic Key
8-2. Steps to take in an emergency Have the malfunction repaired immediately. (vehicles with a smart key system) After taking the specified steps to correct the suspected problem, check that the warning message and light go off. Interior Exterior Warning message Details/Actions buzzer buzzer...
Page 457 8-2. Steps to take in an emergency Interior Exterior Warning message Details/Actions buzzer buzzer An attempt was made to lock the doors using the entry func- Contin- tion after the electronic key was uous carried outside the vehicle with- Once (For 5 out turning off the “POWER”...
Page 458 8-2. Steps to take in an emergency Interior Exterior Warning message Details/Actions buzzer buzzer The electronic key was carried outside the vehicle and the driver’s door was opened and closed while a shift lever posi- Contin- Contin- tion other than P was selected uous uous without...
Page 459 8-2. Steps to take in an emergency Interior Exterior Warning message Details/Actions buzzer buzzer • The electronic key could not detected when “POWER” switch pressed after the doors were unlocked with the mechanical key. • The electronic key could not ...
Page 460 8-2. Steps to take in an emergency Interior Exterior Warning message Details/Actions buzzer buzzer The driver's door was opened and closed with the “POWER” switch turned off and then the “POWER” switch was put in ACCESSORY mode twice with- out the hybrid system being started.
Page 461 8-2. Steps to take in an emergency Interior Exterior Warning message Details/Actions buzzer buzzer After the “POWER” switch has been turned off with the shift lever in a position other than P,  Once the shift lever has been shifted to P.
Page 462: If You Have A Flat Tire
8-2. Steps to take in an emergency If you have a flat tire Your vehicle is equipped with a spare tire. The flat tire can be replaced with the spare tire. For details about tires: P. 398 WARNING If you have a flat tire ■...
Page 463 8-2. Steps to take in an emergency WARNING Using the tire jack ■ Observe the following precautions. Improper use of the tire jack may cause the vehicle to suddenly fall off the jack, leading to death or serious injury. ● Do not use the tire jack for any purpose other than replacing tires or installing and removing tire chains.
Page 464 8-2. Steps to take in an emergency Taking out the jack Move the driver seat to the front most position. Push the tabs in and remove the cover by pulling it towards you. Take out the jack. For tightening For loosening I n f o r ma t i o n P r o v i d e d b y :...
Page 465 8-2. Steps to take in an emergency Taking out the compact spare tire Remove luggage floor cover by lifting up the points indicated by the arrows. Remove the spare wheel cush- ions, then loosen the center fastener that secures the spare tire.
Page 466 8-2. Steps to take in an emergency Replacing a flat tire Chock the tires. Flat tire Wheel chock positions Left-hand side Behind the rear right-hand side tire Front Right-hand side Behind the rear left-hand side tire Left-hand side In front of the front right-hand side tire Rear Right-hand side In front of the front left-hand side tire...
Page 467 8-2. Steps to take in an emergency Turn the tire jack portion “A” by hand until the notch of the jack is in contact with the jack point. The jack point guides are located under the rocker panel. They indicate the jack point positions. Raise the vehicle until the tire is slightly raised off the ground.
Page 468 • If there are any cracks or deformations in the bolt screws, nut threads or bolt holes of the wheel, have the vehicle inspected by your Toyota dealer. • When installing the wheel nuts, be sure to install them with the tapered ends facing inward.
Page 469 8-2. Steps to take in an emergency Installing the compact spare tire Remove any dirt or foreign mat- ter from the wheel contact sur- face. If foreign matter is on the wheel contact surface, the wheel nuts may loosen while the vehicle is in motion, causing the tire to come off.
Page 470 8-2. Steps to take in an emergency Firmly tighten each wheel nut two or three times in the order shown in the illustration. Tightening torque: 76 ft•lbf (103 N•m, 10.5 kgf•m) Stow the tire jack and all tools. Stow the flat tire in the luggage compartment as shown in the illustration.
Page 471 8-2. Steps to take in an emergency If you have a flat front tire on a road covered with snow or ice ■ Install the compact spare tire on one of the rear wheels of the vehicle. Perform the following steps and fit tire chains to the front tires: Replace a rear tire with the compact spare tire.
Page 472 When a tire is repaired with liquid sealants, the tire pressure warning valve and transmitter may not operate properly. If a liquid sealant is used, contact your Toyota dealer or other qualified service shop as soon as possible. Make sure to replace the tire pressure warning valve and transmitter when replacing the tire.
Page 473: If The Hybrid System Will Not Start
● One or both of the 12-volt battery terminals may be disconnected. (P. 394) Contact your Toyota dealer if the problem cannot be repaired, or if repair procedures are unknown. I n f o r ma t i o n P r o v i d e d b y :...
Page 474 Even if the hybrid system can be started using the above steps, the system may be malfunctioning. Have the vehicle inspected by your Toyota dealer. I n f o r ma t i o n P r o v i d e d b y :...
Page 475: If The Shift Lever Cannot Be Shifted From P
(a sys- tem to prevent accidental operation of the shift lever). Have the vehicle inspected by your Toyota dealer immediately. The following steps may be used as an emergency measure to ensure that the shift lever can be shifted: Set the parking brake.
Page 476: If The Electronic Key Does Not Operate Properly
5 seconds unlocks the other doors. Starting the hybrid system Ensure that the shift lever is in P and depress the brake pedal. Touch the Toyota emblem side of the electronic key to the “POWER” switch. When...
Page 477 Press the “POWER” switch. In the event that the “POWER” switch still cannot be operated, contact your Toyota dealer. Stopping the hybrid system ■ Shift the shift lever to P and press the “POWER” switch as you normally do when stopping the hybrid system.
Page 478: If The Vehicle 12-Volt Battery Is Discharged
The following procedures may be used to start the hybrid sys- tem if the vehicle’s 12-volt battery is discharged. You can also call your Toyota dealer or a qualified repair shop. If you have a set of jumper (or booster) cables and a second vehicle with a 12-volt battery, you can jump start your vehicle by following the steps below.
Page 479 8-2. Steps to take in an emergency Connect the jumper cables according to the following procedure: Connect a positive jumper cable clamp to the exclusive jump starting terminal on your vehicle. Connect the clamp on the other end of the positive cable to the positive (+) battery terminal on the second vehicle.
Page 480 8-2. Steps to take in an emergency Make sure the “READY” indicator comes on. If the indicator does not come on, contact your Toyota dealer. Once the hybrid system has started, remove the jumper cables in the exact reverse order from which they were connected.
Page 481 12-volt battery. After recharging the 12-volt battery ■ Have the 12-volt battery inspected at your Toyota dealer as soon as possi- ble. If the 12-volt battery is deteriorating, continued use may cause the 12-volt battery to emit a malodorous gas, which may be detrimental to the health of passengers.
Page 482 8-2. Steps to take in an emergency NOTICE When handling jumper cables ■ When connecting the jumper cables, ensure that they do not become entan- gled in the cooling fan or belt. Exclusive jump starting terminal ■ The exclusive jump starting terminal is to be used when charging the 12-volt battery from another vehicle in an emergency.
Page 483: If Your Vehicle Overheats
(radiator) for any leaks. Radiator Cooling fan If a large amount of coolant leaks, immediately contact your Toyota dealer. The coolant level is satisfac- tory if it is between the “FULL” and “LOW” lines on the reservoir. Reservoir “FULL”...
Page 484 (The fan may not operate in freezing temperatures.) If the fan is not operating: Stop the hybrid system immediately and contact your Toyota dealer. If the fan is operating: Have the vehicle inspected at the nearest Toyota dealer.
Page 485 Start the hybrid system and check for the multi-information dis- play. If the message does not disappear: Stop the hybrid system and contact your Toyota dealer. If the message is not displayed: Have the vehicle inspected at the nearest Toyota dealer.
Page 486 8-2. Steps to take in an emergency WARNING To prevent an accident or injury when inspecting under the hood of ■ your vehicle ● If steam is seen coming from under the hood, do not open the hood until the steam has subsided. The engine compartment may be very hot, caus- ing serious injuries such as burns.
Page 487: If The Vehicle Becomes Stuck
8-2. Steps to take in an emergency If the vehicle becomes stuck Carry out the following procedures if the tires spin or the vehicle becomes stuck in mud, dirt or snow: Shift the shift lever to P and set the parking brake. Stop the hybrid system.
Page 488 8-2. Steps to take in an emergency NOTICE To avoid damage to the transmission and other components ■ ● Avoid spinning the wheels and depressing the accelerator pedal more than necessary. ● If the vehicle remains stuck even after these procedures are performed, the vehicle may require towing to be freed.
Page 489: Vehicle Specifications
Vehicle specifications 9-1. Specifications Maintenance data (fuel, oil level, etc.) ..490 Fuel information ....499 Tire information ....502 9-2. Customization Customizable features ..514 Items to initialize ....519 I n f o r ma t i o n P r o v i d e d b y :...
Page 490: Maintenance Data (Fuel, Oil Level, Etc.)
9-1.Specifications Maintenance data (fuel, oil level, etc.) Dimensions and weights Overall length 157.3 in. (3995 mm) Overall width 66.7 in. (1695 mm)  Without moon roof 57.3 in. (1455 mm) Overall height  With moon roof 57.7 in. (1465 mm) Wheelbase 100.4 in.
Page 491 The vehicle identification number (VIN) is the legal identifier for your vehicle. This is the primary identification number for your Toyota. It is used in registering the ownership of your vehicle. This number is stamped under the front passenger’s seat.
Page 492: Engine Number
9-1. Specifications Engine number ■ The engine number is stamped on the engine block as shown. Engine Model 1NZ-FXE Type 4-cylinder in line, 4-cycle, gasoline 2.95 3.33 in. (75.0  84.7 mm) Bore and stroke Displacement 91.3 cu.in. (1497 cm Intake: 0.006 ...
Page 493: Lubrication System
5 minutes, and check the oil level on the dipstick. Engine oil selection ■ “Toyota Genuine Motor Oil” is used in your Toyota vehicle. Use Toyota approved “Toyota Genuine Motor Oil” or equivalent to satisfy the following grade and viscosity.
Page 494: Cooling System
Gasoline engine 5.6 qt. (5.3 L, 4.7 Imp. qt.) Power control unit 1.7 qt. (1.6 L, 1.4 Imp. qt.) Use either of the following: • “Toyota Super Long Life Coolant” • A similar high-quality ethylene glycol- Coolant type based non-silicate,...
Page 495: Ignition System
9-1. Specifications Ignition system Spark plug Make DENSO FK16R-A8 0.03 in. (0.8 mm) NOTICE Iridium-tipped spark plugs ■ Use only iridium-tipped spark plugs. Do not adjust the spark plug gap. Electrical system 12-volt battery Open voltage at 12.5 V or over Fully charged 11.0 ...
Page 496 Toyota dealer. NOTICE Transmission fluid type ■ Using transmission fluid other than “Toyota Genuine ATF WS” may cause deterioration in shift quality, locking up of the transmission accompanied by vibration and, ultimately, damage to the vehicle’s transmission. Brakes Pedal clearance 2.8 in.
Page 497 9-1. Specifications Tires and wheels 15-inch tires  P175/65R15 84H, T125/70D16 Tire size (spare) Front: 35 psi (240 kPa, 2.4 kgf/cm or bar) Rear: Tire inflation pressure 33 psi (230 kPa, 2.3 kgf/cm or bar) (Recommended cold Spare: tire inflation pressure) 60 psi (420 kPa, 4.2 kgf/cm or bar) Never exceed the maximum cold tire infla-...
Page 498 9-1. Specifications Light bulbs Light bulbs Bulb No. Type Front turn signal/parking  28/8 lights  License plate lights  Back-up lights Exterior  Side turn signal lights  Front side marker lights  Rear turn signal lights Interior lights/personal ...
Page 499: Fuel Information
In very few cases, driveability problems may be caused by the brand of gaso- line you are using. If driveability problems persist, try changing the brand of gasoline. If this does not correct the problem, consult your Toyota dealer. Gasoline quality standards ■...
Page 500 ■ Some gasoline contains an octane enhancing additive called MMT (Methylcy- clopentadienyl Manganese Tricarbonyl). Toyota does not recommend the use of gasoline that contains MMT. If fuel containing MMT is used, your emission control system may be adversely affected. The malfunction indicator lamp on the instrument cluster may come on. If this happens, contact your Toyota dealer for service.
Page 501 9-1. Specifications NOTICE Notice on fuel quality ■ ● Do not use improper fuels. If improper fuels are used, the engine will be damaged. ● Do not use leaded gasoline. Leaded gasoline can cause damage to your vehicle’s three-way catalytic converters causing the emission control system to malfunction.
Page 502: Tire Information
9-1. Specifications Tire information Typical tire symbols  Full-size tire  Compact spare tire I n f o r ma t i o n P r o v i d e d b y :...
Page 503 9-1. Specifications Tire size (P. 505) TUBELESS or TUBE TYPE A tubeless tire does not have a tube and air is directly put into the tire. A tube type tire has a tube inside the tire and the tube maintains the air pressure.
Page 504 9-1. Specifications Typical DOT and Tire Identification Number (TIN) DOT symbol Tire Identification Number (TIN) Tire manufacturer's identifica- tion mark Tire size code Manufacturer's optional tire type code (3 or 4 letters) Manufacturing week Manufacturing year : The DOT symbol certifies that the tire conforms to applicable Federal Motor Vehicle Safety Standards.
Page 505 9-1. Specifications Tire size Typical tire size information ■ The illustration indicates typical tire size. Tire use (P = Passenger car, T = Temporary use) Section width (millimeters) Aspect ratio (tire height to section width) Tire construction code (R = Radial, D = Diagonal) Wheel diameter (inches) Load index (2 digits or 3 digits) Speed symbol (alphabet with one letter)
Page 506 9-1. Specifications Tire section names Bead Sidewall Shoulder Tread Belt Inner liner Reinforcing rubber Carcass Rim lines Bead wires Chafer I n f o r ma t i o n P r o v i d e d b y :...
Page 507 U.S. Department of Transportation. It provides the purchasers and/or prospective purchasers of Toyota vehicles with information on uniform tire quality grading. Your Toyota dealer will help answer any questions you may have as you read this information. DOT quality grades ■...
Page 508 9-1. Specifications Temperature A, B, C ■ The temperature grades are A (the highest), B, and C, representing the tire's resistance to the generation of heat and its ability to dissi- pate heat when tested under controlled conditions on a specified indoor laboratory test wheel.
Page 509 9-1. Specifications Glossary of tire terminology Tire related term Meaning Tire pressure when the vehicle has been Cold tire inflation pres- parked for three hours or more, or has not sure been driven more than 1 mile or 1.5 km under that condition The maximum cold inflated pressure to which Maximum...
Page 510 9-1. Specifications Tire related term Meaning A metal support for a tire or a tire and tube assembly upon which the tire beads are seated Rim diameter Nominal diameter of the bead seat (Wheel diameter) Rim size designation Rim diameter and width The industry manufacturer's designation for a Rim type designation rim by style or code...
Page 511 9-1. Specifications Tire related term Meaning The parting of cords from adjacent rubber Cord separation compounds Any parting within the tread, sidewall, or inner- Cracking liner of the tire extending to cord material A pneumatic tire with an inverted flange tire and rim system in which the rim is designed with rim flanges pointed radially inward and the tire is designed to fit on the underside of...
Page 512 9-1. Specifications Tire related term Meaning The rim on which a tire is fitted for physical Measuring rim dimension requirements Any parting at any junction of tread, sidewall, Open splice or innerliner that extends to cord material Outer diameter The overall diameter of an inflated new tire The linear distance between the exteriors of the sidewalls of an inflated tire, including ele- Overall width...
Page 513 9-1. Specifications Tire related term Meaning A tire that attains a traction index equal to or greater than 110, compared to the ASTM E- 1136 Standard Reference Test Tire, when using the snow traction test as described in ASTM F-1805-00, Standard Test Method for Snow tire Single Wheel Driving Traction in a Straight Line on Snow-and Ice-Covered Surfaces, and...
Page 514: 9-2. Customization
Toyota dealer. Some function settings are changed simultaneously with other func- tions being customized. Contact your Toyota dealer for further details. Customizing vehicle features (audio system) Changing by using the multimedia system ■...
Page 515 9-2. Customization Customizable Features Settings that can be changed using the audio system Settings that can be changed by your Toyota dealer Definition of symbols: O = Available, — = Not available Vehicle Proximity Notification System (  P. 72) ■...
Page 516 9-2. Customization Smart key system (  P. 124, 133, 138) ■ Customized Function Default setting setting Smart key system — O Smart door unlocking Driver’s door All the doors Number permissible times of continuous smart Twice Unlimited — O lock : If equipped Wireless remote control ( ...
Page 517 9-2. Customization Door lock (  P. 124, 133, 476) ■ Customized Function Default setting setting Driver's door unlocked in one All doors unlocked Unlocking using a key step, all doors — O in one step. unlocked in two steps Speed-detecting auto- matic door lock function...
Page 518 9-2. Customization Illumination (  P. 349) ■ Customized Function Default setting setting 7.5 seconds Time elapsed before lights 15 seconds turn off 30 seconds Operation when the doors — O are unlocked Operation after the engine switch is turned to the —...
Page 519: Items To Initialize
9-2. Customization Items to initialize The following items must be initialized for normal system opera- tion after such cases as the 12-volt battery being reconnected, or maintenance being performed on the vehicle: Item When to initialize Reference Message indicating maintenance is required After the maintenance is performed P.
Page 520 9-2. Customization I n f o r ma t i o n P r o v i d e d b y :...
Page 521: For Owners
For owners Reporting safety defects for U.S. owners......522 Seat belt instructions for Canadian owners (in French) ....... 523 SRS airbag instructions for Canadian owners (in French) ....... 525 I n f o r ma t i o n P r o v i d e d b y :...
Page 522: Reporting Safety Defects For U.s. Owners
National Highway Traffic Safety Administration (NHTSA) in addi- tion to notifying Toyota Motor Sales, U.S.A., Inc. (Toll-free: 1-800- 331-4331). If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign.
Page 523: Seat Belt Instructions For Canadian Owners (In French)
Seat belt instructions for Canadian owners (in French) The following is a French explanation of seat belt instructions extracted from the seat belt section in this manual. See the seat belt section for more detailed seat belt instructions in English. Utilisation correcte des ceintures de sécurité...
Page 524 AVERTISSEMENT Détérioration et usure des ceintures de sécurité ■ Inspectez le système de ceintures de sécurité régulièrement. Contrôlez l'absence de coupures, d'effilochages et de pièces desserrées. N'utilisez pas une ceinture de sécurité endommagée avant qu'elle ne soit remplacée. Une ceinture de sécurité endommagée ne permet pas de protéger un occu- pant de blessures graves ou mortelles.
Page 525: Srs Airbag Instructions For Canadian Owners (In French)
SRS airbag instructions for Canadian owners (in French) The following is a French explanation of SRS airbag instructions extracted from the SRS airbag section in this manual. See the SRS airbag section for more detailed SRS airbag instruc- tions in English. ◆...
Page 526 ◆ Coussins gonflables latéraux et rideaux SRS Coussins gonflables latéraux avant SRS Participent à la protection du torse des occupants de siège avant. Coussins gonflables rideaux SRS Participent principalement à la protection de la tête des occu- pants des sièges latéraux. I n f o r ma t i o n P r o v i d e d b y :...
Page 527 Compositions du système de coussin gonflable SRS Coussins gonflables rideaux Coussin gonflable de coussin de siège conducteur Témoin d'avertissement SRS et témoins indicateurs “AIR Capteurs d'impact latéral BAG ON” et “AIR BAG OFF” (avant) Coussins gonflables latéraux Prétensionneurs de ceintures avant de sécurité...
Page 528 Votre véhicule est équipé de COUSSINS GONFLABLES INTELLI- GENTS conçus selon les normes de sécurité américaines applicables aux véhicules à moteur (FMVSS208). L'ensemble de capteurs de coussins gonflables (ECU) régule le déploiement des coussins gon- flables sur la base des informations qu'il reçoit des capteurs, etc., indi- qués ci-dessus dans le schéma illustrant les composants du système.
Page 529 AVERTISSEMENT Précautions relatives aux coussins gonflables SRS ■ Respectez les précautions suivantes concernant les coussins gonflables SRS. Le non-respect de ces précautions peut occasionner des blessures graves, voire mortelles. ● Le conducteur et tous les passagers du véhicule doivent porter correcte- ment leur ceinture de sécurité.
Page 530 Un nourrisson ou un enfant trop petit pour utiliser une ceinture de sécurité doit être correctement attaché au moyen d'un siège de sécurité enfant. Toyota recommande vivement d'installer tous les nour- rissons et enfants sur les sièges arrière du véhicule et de prévoir pour eux des systèmes de retenue adaptés.
Page 531 AVERTISSEMENT Précautions relatives aux coussins gonflables SRS ■ ● Ne laissez pas un enfant rester debout devant le coussin gonflable passager avant SRS ou s'asseoir sur les genoux du passager avant. ● Ne laissez pas les occupants des siè- ges avant voyager avec un objet sur les genoux.
Page 532 AVERTISSEMENT Précautions relatives aux coussins gonflables SRS ■ ● Ne fixez rien aux portes, à la vitre du pare-brise, aux vitres latérales, aux montants avant et arrière, au rail latéral de toit et à la poignée de maintien. ● Véhicules sans système d'accès et de démarrage mains libres: Ne fixez pas d'objets lourds, pointus ou très durs, tels que des clés et des accessoires...
Page 533 SRS Ne mettez pas votre véhicule au rebut et ne procédez à aucune des modifi- cations suivantes sans consulter votre concessionnaire Toyota. Les cous- sins gonflables SRS peuvent ne pas fonctionner correctement ou se déployer (se gonfler) accidentellement, provoquant la mort ou de graves blessures.
Page 534 I n f o r ma t i o n P r o v i d e d b y :...
Page 535 Index What to do if... (Troubleshooting) ....536 Alphabetical index ..... 541 For vehicles with a navigation system, refer to the “NAVIGATION SYSTEM OWNER’S MANUAL” for I n f o r ma t i o n P r o v i d e d b y : information regarding the navigation system.
Page 536 You lose your keys ● If you lose your keys or mechanical keys, new genuine keys or mechanical keys can be made by your Toyota dealer. (P. 120) ● If you lose your keys or electronic keys, the risk of vehicle theft increases significantly.
Page 537 What to do if... (Troubleshooting) The rear door cannot be opened ● Is the child-protector lock set? The rear door cannot be opened from inside the vehicle when the lock is set. Open the rear door from outside and then unlock the child-protector lock.
Page 538 What to do if... (Troubleshooting) The shift lever cannot be shifted from P even if you depress the brake pedal ● Vehicles without a smart key system: Is the engine switch in the “ON” position? If you cannot release the shift lever by depressing the brake pedal with the engine switch in the “ON”...
Page 539 What to do if... (Troubleshooting) The “POWER” switch is turned off automatically (vehicles with a smart key system) ● The auto power off function will be operated if the vehicle is left in ACCES- SORY or ON mode (the hybrid system is not running) for a period of time. (P.
Page 540 What to do if... (Troubleshooting) A warning light turns on or a warning message or indicator is displayed ● When a warning light turns on or a warning message or indicator is dis- played, refer to P. 441, 449. When a problem has occurred If you have a flat tire ●...
Page 541: Alphabetical Index
Alphabetical index Alphabetical index Antenna ........265 Anti-lock brake system ... 232 A/C ..........340 Assist grips......361 ABS ........... 232 Audio input ......250 Air conditioning filter ....411 Audio system Air conditioning system Antenna ........ 331 Air conditioning filter ..... 411 Audio input......
Page 542 Alphabetical index Back door ......... 133 Care Back-up lights Exterior ......... 366 Replacing light bulbs..... 425 Interior ........369 Wattage ........ 498 Seat belts......369 Battery Cargo capacity......179 CD player........266 Checking....... 394 Chains ........242 Hybrid battery Child-protectors ...... 128 (traction battery) ....
Page 543 Alphabetical index Child safety Daytime running light Airbag precautions....40 system........203 Child-protectors ....128 Defogger Child restraint system ..... 57 How your child should Rear window......342 wear the seat belt ....32 Side mirrors ......342 Dimension ........ 490 Installing child restraints ..
Page 544 Alphabetical index Engine Eco drive mode......197 Compartment......385 Electric power steering ... 232 Engine switch ....182, 186 Electronic key Hood ........382 How to start the hybrid If the electronic key does system......182, 186 not operate properly ... 476 Emergency flashers Identification number ....
Page 545 Alphabetical index Floor mat ........24 Hazard lights Fluid Switch ........430 Head restraints Brake ........496 Washer ......... 393 Adjusting ......150 Fog lights Headlights Replacing light bulbs..... 427 Replacing light bulbs .... 427 Switch ........201 Switch ........205 Front fog lights Heaters Replacing light bulbs.....
Page 546 Alphabetical index Jack License plate lights Positioning a floor jack..384 Replacing light bulbs .... 427 Vehicle-equipped jack... 462 Wattage ........ 498 Jack handle ......462 Light bulbs Replacing......420 Wattage ........ 498 Lights Keyless entry ....124, 133 Emergency flasher switch..430 Keys Fog light switch.....
Page 547 Alphabetical index Maintenance Odometer ........97 Do-it-yourself maintenance....... 379 Engine oil......493 Opener Emission inspection and maintenance (I/M) Back door ......133 programs ......378 Fuel filler door....... 214 General maintenance ... 375 Hood ........382 Outside rear view mirrors Maintenance data ....
Page 548 Alphabetical index Radiator ........391 Seat belts Radio......... 264 Adjusting the seat belt .... 28 Rear seat Automatic Locking Folding down ......146 Retractor (ALR) ....32 Rear turn signal lights Child restraint system Replacing light bulbs..... 425 installation ......63 Wattage ........
Page 549 Alphabetical index Shift lever Switch If the shift lever cannot Cruise control ....... 218 be shifted from P ....475 Eco drive mode switch..197 Emergency flasher switch..430 Transmission ......196 Shift lock system ..... 475 Engine switch ....182, 186 Side airbags .......
Page 550 Alphabetical index TRAC ........232 Traction control ....... 232 Tail lights Transmission Replacing light bulbs..... 427 Hybrid transmission ....196 Switch ........201 Theft deterrent system If the shift lever cannot be shifted from P ....475 Immobilizer system ....82 Trip information......
Page 551 Alphabetical index Warning messages....449 Washer Warning buzzers Checking....... 393 Brake system ......441 Preparing and checking Electric power steering before winter ...... 241 system ........ 442 Switch ......207, 211 Key reminder ......456 Washing and waxing....366 Master warning ..... 443 Weight Seat belt reminder ....
Page 552: Gas Station Information
Engine oil capacity (Drain and refill — P. 493 reference) “Toyota Genuine Motor Oil” or equivalent Engine oil type P. 493 I n f o r ma t i o n P r o v i d e d b y :...

Toyota 2015 Prius C Owner's Manual

1-1. for Safe Use

Hybrid System Precautions

1-3. Theft Deterrent System

2 Instrument Cluster

Operation of each Component

3-1. Key Information

3-2. Opening, Closing and Locking the Doors

Adjusting the Seats

Adjusting the Steering Wheel and Mirrors

3-5. Opening and Closing the Windows

Driving

4-1. before Driving

4-2. Driving Procedures

4-3. Operating the Lights and Wipers

4-4. Refueling

Using the Driving Support Systems Cruise Control

4-6. Driving Tips

Audio System

5-1. Using the Audio System

Basic Operations (Multimedia System)

Setup (Multimedia System)

5-4. Using the Multimedia System

Using the Radio

5-7. Using an External Device

Connecting Bluetooth ® (Multimedia System)

Bluetooth ® Audio (Multimedia System)

Bluetooth ® Phone (Multimedia System)

Bluetooth (Multimedia System)

Using the Voice Command System (Multimedia System)

Interior Features

Using the Air Conditioning System and Defogger

Using the Interior Lights

6-3. Using the Storage Features

Other Interior Features

Maintenance and Care Cleaning and Protecting

Maintenance Requirements

Do-It-Yourself Maintenance

When Trouble Arises

8-1. Essential Information

Steps to Take in an Emergency

Vehicle Specifications

Specifications Maintenance Data

9-2. Customization

For Owners

Quick Links

Related Manuals for Toyota 2015 Prius C

Summary of Contents for Toyota 2015 Prius C