Honda 2003 CR-V Owner's Manual page 310

Changing a Flat Tire
WHEEL NUT
15. Loosen the five wheel nuts 1/2
turn with the wheel wrench.
312
Taking Care of the Unexpected
JACKING POINT
16. Locate the jacking point nearest
the tire you need to change. It is
pointed to by an arrow molded into
the underside of the body. Place
the jack under the jacking point.
Turn the end bracket clockwise
until the top of the jack contacts
the jacking point. Make sure the
center of the jacking point tab is
resting in the jack notch.
WHEEL WRENCH
17. Use the extension and wheel
wrench as shown to raise the
vehicle until the flat tire is off the
ground.
EXTENSION