Honda 2003 CR-V Owner's Manual page 255

BOLT
6. To drain the coolant from the
reserve tank:
Use a wrench to remove the bolt
from the battery hold-down.
Remove the seven holding clips
from the cover by using a flat-
tipped screwdriver. Then pull the
bulkhead cover away.
TAB
7. Remove the reserve tank
mounting bolt with a wrench, pull
out the coolant tube from the two
clips on the upper and lower side
of the fan shroud, then move the
reserve tank away from the fan
shroud while pulling the bottom
tab of the reserve tank out of the
hole.
BOLT
8. Remove the coolant tube from the
four clips.
Cooling System
CONTINUED
255
Maintenance