Honda 2003 CR-V Owner's Manual page 289

Replacing a Front Parking Light
Bulb
BOLT
1. Open the hood. The front parking
light is next to the headlight bulb.
2. To access the parking light bulb:
Use a wrench to loosen the bolt on
the battery hold-down. Remove
the seven holding clips from the
cover by using a flat-tipped
screwdriver. Then pull the
radiator support cover away.
COVER
HOLDING
CLIP
BULB
3. Remove the socket from the
headlight assembly by turning it
one-quarter turn counterclockwise.
4. Pull the burned out bulb straight
out of its socket. Push the new
bulb straight into the socket until
it bottoms.
5. Insert the socket back into the
headlight assembly. Turn it
clockwise to lock it in place.
6. Turn on the parking lights and
check that the new bulb is
working.
7. Reinstall the radiator support
cover. Lock the holding clips by
pushing on the center of each clip.
Tighten the bolt on the battery
hold-down.
Maintenance
Lights
289