Honda 2003 CR-V Owner's Manual page 291

6. Pull the burned out bulb straight
out of its socket. Push the new
bulb straight into the socket until
it bottoms.
7. Reinstall the socket into the light
assembly by turning it clockwise
until it locks.
8. Test the lights to make sure the
new bulb is working.
9. Align the clips on the taillight
assembly with the holes in the
body, then push the taillight
assembly into place. Tighten the
two mounting screws securely and
reinstall the covers.
Replacing a Rear License Plate
Bulb
1. Place a cloth and insert a small
flat-tipped screwdriver between
the right edge of the lens and the
housing. The lens will come down.
2. Pull the bulb straight out of its
socket. Push the new bulb in until
it bottoms in the socket.
3. Turn on the parking lights and
check that the new bulb is
working.
4. Put the lens back into the light
assembly, left side first. Push on
the right edge until it snaps into
place.
Maintenance
Lights
BULB
LENS
291