Table of Contents
Advertisement
Protecting Children
Third Seat Installation:
There are three attachment points
on the tailgate sill. Select the attach-
ment point you want to use, and
remove the plug with a small flat-
tipped screwdriver or fingernail file.
Driver and Passenger Safety
Install the anchor plate and
mounting hardware. The hardware is
available for purchase from your
Honda dealer (part number 82410-
SE3-C01). For Canadian models, the
hardware is supplied with the vehicle.
When installing tether hardware,
make sure the toothed washer is on
the bottom of the bolt. Tighten the
bolt to:
16lbf.ft (22N.m,2.2kgf.m)
If a torque wrench was not used, see
your Honda dealer as soon as
possible to verify proper installation.
To attach the tether to the child
seat, follow the child seat maker's
instructions.
If you are not sure how to install the
tether, or you need mounting
hardware, contact your Honda dealer.
Hide quick links:
Advertisement
Table of Contents
