Honda 1999 Odyssey Owner's Manual page 270

5. Remove the socket by turning it
one-quarter turn counterclockwise.
6. Pull the bulb straight out of its
socket.
Push the new bulb straight into
the socket until it bottoms.
7. Reinstall the socket into the light
assembly by turning it clockwise
until it locks.
8. Test the lights to make sure the
new bulb is working.
9. When reinstalling the taillight
assembly, align and pop the snap
fasteners in place. Tighten the two
mounting screws and reinstall the
covers in place.
Replacing Rear Bulbs
(in Tailgate)
TAILLIGHT COVER
1. Open the tailgate. Place a cloth on
the edge of the taillight cover.
Remove it by carefully prying in
the notch on its edge with a small
flat-tipped screwdriver.
2. Determine which of the two bulbs
is burned out: taillight or back-up
light.
3. Remove the socket by turning it
one-quarter turn counterclockwise.
Maintenance
Lights
CONTINUED