Table of Contents
Advertisement
Cooling System
4. Install a rubber hose on the drain
bolt in the back of the engine
block. Loosen the drain bolt.
Maintenance
RESERVE TANK
HOLDER
5. Remove the reserve tank from its
holder by pulling it straight up.
Drain the coolant, then put the
tank back in its holder.
6. When the coolant stops draining,
RESERVE
tighten the drain plug at the
TANK CAP
bottom of the radiator.
7. Tighten the drain bolt at the rear
of the engine cylinder block
securely.
Tightening torque:
7 lbf . ft (10 N . m,1.0 kgf.m)
8. Mix the recommended antifreeze
with an equal amount of purified
or distilled water in a clean
container. The cooling system
capacity is:
1.74 US gal (6.6
,1.45 Imp gal)
Hide quick links:
Advertisement
Table of Contents
