Cruise Control - Subaru 2006 Impreza WRX Owner's Manual

Cruise control

Cruise control enables you to maintain a
constant vehicle speed without holding
your foot on the accelerator pedal and it is
operative when the vehicle speed is 25
mph (40 km/h) or more. Make sure the
main switch is turned “OFF” when the
cruise control is not in use to avoid unin-
tentionally setting the cruise control.
NOTE
If you move the cruise control lever or
press the main switch button while
turning the ignition switch “ON”, the
cruise control function is deactivated
and the “CRUISE” indicator light flash-
es. To reactivate the cruise control
function, turn the ignition switch back
to the “ACC” or “LOCK” position, and
then turn it again to the “ON” position.
Do not use the cruise control under
any of the following conditions. This
may cause loss of vehicle control:
driving up or down a steep grade
driving on slippery or winding
roads
driving in heavy traffic
To set cruise control
1. Push the main switch button.
The “ ” indicator light on the com-
bination meter will come on.
2. Depress the accelerator pedal until the
Starting and operating
vehicle reaches the desired speed.
0
300332
3. Push the control lever downward in the
“SET/COAST” direction and release it.
Then release the accelerator pedal.
700361
At this time, the “
illuminated in the combination meter.
7-27
300333
700362
” indicator light is
– CONTINUED –