Windshield Wiper Blade Rubber; Rear Window Wiper Blade Assembly - Subaru 2006 Impreza WRX Owner's Manual

11-38
Maintenance and service
Windshield wiper blade rub-
ber
1
1) Metal support
1. Grasp the locked end of the blade rub-
ber assembly and pull it firmly until the
stoppers on the rubber are free of the met-
al support.
0
1
1) Metal spines
2. If the new blade rubber is not provided
B00330
with two metal spines, remove the metal
spines from the old blade rubber and in-
stall them in the new blade rubber.
3. Align the claws of the metal support
with the grooves in the rubber and slide
the blade rubber assembly into the metal
support until it locks.
B00504
1) Stopper
4. Be sure to position the claws at the end
of the metal support between the stoppers
on the rubber as shown. If the rubber is
not retained properly, the wiper blade may
scratch the windshield.
Rear window wiper blade as-
sembly
1. Raise the wiper arm off the rear win-
dow.
B00059
1
B00332