Subaru 2009 Forester Owner's Manual page 14

! Scan tuning (SCAN)
If you press the "SCAN" button, the radio
will switch to the scan mode. In this mode,
the radio scans through the radio band
until a station is found. The radio will stop
at the station for 5 seconds while display-
ing the frequency, after which scanning
will continue until the entire band has been
scanned.
Press the "SCAN" button again to cancel
the SCAN mode and to stop at any
displayed channel.
Automatic tuning may not function prop-
erly if the station reception is weakened by
distance from the station or proximity to
tall buildings and hills.
! PTY (Program type) group tuning
(only FM reception)
Press the "PTY/CAT" button to change to
the PTY selection mode. At this time, the
PTY group that you are currently listening
to will be displayed for 10 seconds. In PTY
selection mode, "PTY" is displayed on the
screen.
Audio
! PTY (Program type) group selection
In PTY selection mode, press the "PTY"
button " " or " " to change the PTY
group by one step at a time.
Pressing " " changes the PTY group up
by one step. Pressing " " changes the
PTY group down by one step.
This operation only changes the display. It
does not change the station that is
currently being received.
– CONTINUED –
5-11