Engine Oil - Subaru 2003 Forester Owner's Manual

Hide thumbs Also See for 2003 Forester:
Table of Contents

Advertisement

Engine oil

„ Checking the oil level
Check the engine oil level at each fuel stop.
1. Park the vehicle on a level surface and stop the en-
gine.
2. Pull out the dipstick, wipe it clean, and insert it
again.
3. Be sure the dipstick is correctly inserted until it
stops with the graphic symbol "
pearing as shown in the illustration.
1) Notch
2) Upper level
3) Lower level
4) Front of vehicle
4. Pull out the dipstick again and check the oil level on
HSB018BA
it. If it is below the lower level, add oil to bring the level
up to the upper level.
" on its top ap-
y Use only engine oil with the recommended
grade and viscosity.
y Be careful not to spill engine oil when adding
it. If oil touches the exhaust pipe, it may cause
Maintenance and service
1
2
3
4
HSB019BB
– CONTINUED –
11-9

Advertisement

Table of Contents
loading

Table of Contents