Subaru 2003 Forester Owner's Manual page 170

V Compass zone adjustment
1
2
3
4
5
6
Compass calibration zones
1. The zone setting is factory preset to Zone 8. Refer
to the "Compass calibration zone" map shown above
or one attached to the end of this manual to verify that
the compass zone setting is correct for your geograph-
ical location.
2. Press and hold the right button for 3 seconds then
release, and the word "ZONE" will briefly appear and
then the zone number will be displayed.
3. Press the right hand button repeatedly to cycle the
display through all possible zone settings. Stop cycling
when the correct zone setting for your location is dis-
15
14
13
12
11
10
9
7
8 HS3039AA
played.
4. Releasing the button for 3 seconds will exit the
zone setting mode.
„ Outside mirrors
T Convex mirror (passenger side)
Objects look smaller in a convex mirror and far-
ther away than when viewed in a flat mirror. Do
not use the convex mirror to judge the distance
of vehicles behind you when changing lanes.
Use the inside mirror (or glance backwards) to
Instruments and controls
HS3040BA
– CONTINUED –
3-31