Subaru 2003 Forester Owner's Manual page 180

T Heating and defrosting
To direct warm air toward the floor and the windshield:
1. Set the air flow control dial to the "
2. Set the temperature control dial to the most com-
fortable level.
3. Set the fan speed control dial to the desired speed.
If your vehicle is equipped with an air conditioner,
when the " " or "
conditioner compressor automatically operates re-
gardless of the position of the air conditioner button to
defog the windshield quickly.
However, the air conditioner indicator light does not
come on at this time.
HS4014AA
"position.
" position is selected, the air
NOTE
Warm air also comes out from the right and left air
outlets. To stop warm air flow from these outlets,
turn the corresponding thumb-wheel down.
T Heating
To direct warm air toward the floor:
1. Set the air inlet selection button to the OFF position
2. Set the air flow control dial to the "
3. Set the temperature control dial to the most com-
fortable level.
4. Set the fan speed control dial to the desired speed.
Climate control
HS4015AA
" position.
– CONTINUED –
4-7