Subaru 2003 Forester Owner's Manual page 102

2
3
2. Open the driver's door and sit in the driver's seat.
3. Close the driver's door.
HS2019BB
1) ON
2) LOCK
4. Place the ignition key into the ignition switch and
cycle the switch from LOCK to ON ten times within 15
seconds. Be sure to stop at the LOCK position. The
horn will sound once to indicate that you are in the
transmitter programming mode.
NOTE
You must finish the next step (opening the driver's
door) within 45 seconds of starting this proce-
dures.
Keys and doors
1
2
HS2020BB
– CONTINUED –
2-11