Syslog Message List - HP 501 Configuration And Administration Manual

802.11ac wireless client bridge
Hide thumbs Also See for 501:
Table of Contents

Advertisement

Syslog message list

The following table lists the syslog messages generated by the HP 501. The MAC address of
the HP 501 is automatically added to the beginning of every syslog entry.
Message
The AP startup configuration was updated
successfully.
Loop Protect: A loop detected on interface eth0. A loop was detected.
DHCP6-client: Interface x obtained lease on
new address x.
DHCP-client: Interface x obtained lease on new
address x
DHCP6-client: Interface x obtained lease on
address x.
DHCP-client: Interface x obtained lease on
address x.
Auto country detected and adopted country XX
from AP.
TSB: Connection established with TCP xx at IP xx
port xx.
TSB: Disconnection from TCP xx xx port xx.
TSB: Idle timeout on TCP xx, xx disconnected.
TSB: Closing incoming connection from TCP
client at IP xx port xx. A connection has already
been established.
TSB: tcpserialbridge connect to xx:xx failed
errno=xx (xx), will keep trying.
TSB: Aborting connection from TCP client xx port
xx (cause: new connection request from same IP
address).
TSB: Server on port xx.
Association to SSID x and BSSID x successful.
Deauthenticated from BSSID x with reason x: x.
Roamed to BSSID x for reason x: x.
Lost connection with BSSID x.
Description
Configuration settings were changed and
subsequently saved.
The specified DHCPv6 address was obtained
on the listed interface (new address).
The specified DHCP address was obtained on
the listed interface (new address).
The specified DHCPv6 address was obtained
on the listed interface (same address).
The specified DHCP address was obtained on
the listed interface (same address).
The Country setting is Auto and the country
code was adopted from the upstream AP.
TCP serial connection established.
TCP serial connection terminated.
TCP serial connection disconnected due to idle
timeout.
Ignoring incoming TCP serial connection,
since a connection has already been
established.
Remote TCP serial connection failed and will
retry.
Aborting previous TCP serial connection with
the same IP address since the connection was
closed.
TCP serial server is listening on port xx.
Work group bridge connection established.
Work group bridge connection terminated
due to receiving a disassociation frame.
Work group bridge roamed to a new BSSID.
Work group bridge abruptly lost contact with
the BSSID.
Severity
Informational
Critical
Warning
Warning
Informational
Informational
Notice
Informational
Informational
Informational
Warning
Warning
Warning
Informational
Notice
Notice
Notice
Notice
RSSI log
51

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents